The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro
Mount per ottiche offset modulare e versatile
Il Mount Offset Optic di Arisaka, in attesa di brevetto, è una soluzione di montaggio modulare che consente all'utente di selezionare una posizione offset di 35 o 45 gradi per un mirino red dot senza necessità di componenti aggiuntivi. La posizione di 35 gradi avvicina il mirino red dot a ottiche più sottili e compatte, mentre la posizione di 45 gradi offre maggiore spazio attorno a torrette più larghe o a ottiche di maggiore ingrandimento.
Caratteristiche principali
- Progettato per essere montato sulla parte superiore del rail Picatinny di un fucile AR15.
- Quando il fucile è inclinato per utilizzare il mirino red dot offset, l'ottica rimane centrata sopra il foro e mantiene un'altezza di co-witness inferiore a 1/3.
- La base e le piastre possono essere invertite, consentendo l'uso sul lato sinistro o destro.
- Base e piastre possono essere acquistate separatamente o in combinazione, offrendo un percorso di aggiornamento in futuro man mano che gli utenti acquisiscono nuovi mirini red dot.
Specifiche tecniche
Peso: 1.9 oz senza ottica.
Dimensioni: La lunghezza della base è di 1.0" e occupa tre slot Picatinny (con due linguette di rinculo e una vite di serraggio).
Altezza: La base si trova a 0.180" sopra la superficie del rail Picatinny. Il montaggio è realizzato in alluminio 6061-T6 lavorato CNC e anodizzato con rivestimento duro MIL-A-8625 Tipo III. I driver Torx Plus IP20 e IP27 sono inclusi con ogni base.
Compatibilità delle piastre
Altezza standard (per montaggi ottici da 1.5" a 1.8"):
- Piastra 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Piastra 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Piastra 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Piastra 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (non 5X), Holosun HS403 (non A), HS503, HS515, HS530
- Piastra 6: Aimpoint Acro
Altezza alta (per montaggi ottici da 1.9" a 2.2"):
- Piastra 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Piastra 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
- Piastra 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Piastra 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (non 5X), Holosun HS403 (non A), HS503, HS515, HS530
- Piastra 12: Aimpoint Acro