GRACE USA 7 Pc Steel Punch Set is made with utmost precision. Designed for meticulous work on detailed projects. These punches are Made in the USA from High Carbon Molybendenum Tool Steel and properly heat treated and hardened the entire length with tempered striking end. They are also centerless ground for complete accuracy and we have incorporated a reverse taper from tip of punch to help prevent punch from sticking in the work piece. The punches are manufactured from hex stock steel vs. round which helps stabilize punch from rolling away from user. Packed in a vinyl pouch for safe storage. 100% Made in the USA.
GRACE USA 7 Pc acier serti de Punch est faite avec une précision extrême. Conçu pour un travail minutieux sur les projets détaillés. Ces poinçons sont Made in USA de haut carbone Molybendenum acier à outils et correctement chaleur traités et trempé toute la longueur avec extrémité trempée. Ils sont également centerless pour une exactitude totale et nous avons incorporé une conicité inverse de pointe du poinçon pour aider à prévenir le coup de poing ne colle dans la pièce à travailler. Les punchs sont fabriqués à partir de hexagonale acier stock ou ronde qui aide à stabilise le poinçon de rouler de l'utilisateur. Emballé dans une pochette de vinyle pour le stockage en toute sécurité. 100 % made in USA.
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 2.7
Bent with only a few uses(27.01.2010)
I received this set yesterday. Within a few min. I had bent the tips of two punches. Another thing there is no markings or labels on them to tell them apart.
Select another punch(08.05.2010)
Used these all of my first year at Yavapai College's gunsmithing program. I will buy a replacement set of punches for my second year. See list of "Cons".
Just about the worst.......EVER!!!(24.12.2010)
I'm sorry but I must say this: this product should really be pulled out of inventory from further sale. That said, I can say that every single time I have used one of the punches that required any measurable amount force, the punch simply bent over. I don't know what kind of metal is used, but pot metal or aluminum comes to mind. I was going to send them back but quiet frankly, they are not worth the postage or hassle. I can save you from the same mistake; DO NOT BUY THEM. I think I will melt mine down and use for shot.
Not as durable as they should be(22.02.2012)
At first glance these appear well made and have all the potential of a solid performer. However, if you are going to be using them for heavy duty work, like removing a factory AR front sight post, don't expect them to hold up to much abuse. They WILL break right when you don't need them to. I imagine for light use they'd be okay, but not enough to rate them over one star.
Great tools for the application...(14.11.2012)
I've used these punches numerous times and have always beeen satisfied. Nothings better than knowing the punch is not going to snap off and damage my gun. While the smaller sizes tend to possibly bend under hard pressure, I'd rather have the punch bend then snap off and damage my gun. I just use a solid punch to get the pin started. Overall great USA Made product.
Good product(11.06.2013)
Bought this set as a replacement. Other punch set I used had 3/5 punches break. One snapped in half and the other two bent very quickly. This set from Grace worked like a charm. Right out of the package it was obvious these were more heavy-duty. Pinned my gas tube quickly and easily. The 7 punch set was a nice replacement over the 5 punch set, as it added a bit more versatility for the set overall. Even if a punch does become unusable, you have a replacement option quickly without looking around the garage to try and MacGyver something.
Use for the Purpose Intended(28.09.2014)
These are absolutely superb tools. The reviews that complain about the punches bending have apparently not grasped the concept of "Starter Punches".You can't take a 1/16" or 3/32" punch with a 1" or more shaft length and start beating on them to get a tight pin started out. They will ALL break or bend, Starret, Mayhew, etc. included. Get a cheap punch and cut/grind the shaft to 1/4" long and use them to get the pin started. This is particularly true for AR gas block tapered pins.
Référence: 354007000 GRACE USA STEEL PUNCH KIT Ref Fabricant: GRPS7731940123701 GRACE USA 7 Pc acier serti de Punch est faite avec une précision extrême. Conçu pour un travail minutieux sur les projets détaillés. Ces poinçons sont Made in USA de haut carbone Molybendenum acier à outils et correctement chaleur traités et trempé toute la longueur avec extrémité trempée. Ils sont également centerless pour une exactitude totale et nous avons incorporé une conicité inverse de pointe du poinçon pour aider à prévenir le coup de poing ne colle dans la pièce à travailler. Les punchs sont fabriqués à partir de hexagonale acier stock ou ronde qui aide à stabilise le poinçon de rouler de l'utilisateur. Emballé dans une pochette de vinyle pour le stockage en toute sécurité. 100 % made in USA.
54.9CHF262CHF 54.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Matériaux: SteelStyle: Kit, GraceTaille: 1/8 in, 1/16 in, 5/32 in, 3/16 inQuantité: 7
GRACE USA 7 Pc Steel Punch Set is made with utmost precision. Designed for meticulous work on detailed projects. These punches are Made in the USA from High Carbon Molybendenum Tool Steel and properly heat treated and hardened the entire length with tempered striking end. They are also centerless ground for complete accuracy and we have incorporated a reverse taper from tip of punch to help prevent punch from sticking in the work piece. The punches are manufactured from hex stock steel vs. round which helps stabilize punch from rolling away from user. Packed in a vinyl pouch for safe storage. 100% Made in the USA.
GRACE USA 7 Pc acier serti de Punch est faite avec une précision extrême. Conçu pour un travail minutieux sur les projets détaillés. Ces poinçons sont Made in USA de haut carbone Molybendenum acier à outils et correctement chaleur traités et trempé toute la longueur avec extrémité trempée. Ils sont également centerless pour une exactitude totale et nous avons incorporé une conicité inverse de pointe du poinçon pour aider à prévenir le coup de poing ne colle dans la pièce à travailler. Les punchs sont fabriqués à partir de hexagonale acier stock ou ronde qui aide à stabilise le poinçon de rouler de l'utilisateur. Emballé dans une pochette de vinyle pour le stockage en toute sécurité. 100 % made in USA.
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 2.7
Bent with only a few uses(27.01.2010)
I received this set yesterday. Within a few min. I had bent the tips of two punches. Another thing there is no markings or labels on them to tell them apart.
Select another punch(08.05.2010)
Used these all of my first year at Yavapai College's gunsmithing program. I will buy a replacement set of punches for my second year. See list of "Cons".
Just about the worst.......EVER!!!(24.12.2010)
I'm sorry but I must say this: this product should really be pulled out of inventory from further sale. That said, I can say that every single time I have used one of the punches that required any measurable amount force, the punch simply bent over. I don't know what kind of metal is used, but pot metal or aluminum comes to mind. I was going to send them back but quiet frankly, they are not worth the postage or hassle. I can save you from the same mistake; DO NOT BUY THEM. I think I will melt mine down and use for shot.
Not as durable as they should be(22.02.2012)
At first glance these appear well made and have all the potential of a solid performer. However, if you are going to be using them for heavy duty work, like removing a factory AR front sight post, don't expect them to hold up to much abuse. They WILL break right when you don't need them to. I imagine for light use they'd be okay, but not enough to rate them over one star.
Great tools for the application...(14.11.2012)
I've used these punches numerous times and have always beeen satisfied. Nothings better than knowing the punch is not going to snap off and damage my gun. While the smaller sizes tend to possibly bend under hard pressure, I'd rather have the punch bend then snap off and damage my gun. I just use a solid punch to get the pin started. Overall great USA Made product.
Good product(11.06.2013)
Bought this set as a replacement. Other punch set I used had 3/5 punches break. One snapped in half and the other two bent very quickly. This set from Grace worked like a charm. Right out of the package it was obvious these were more heavy-duty. Pinned my gas tube quickly and easily. The 7 punch set was a nice replacement over the 5 punch set, as it added a bit more versatility for the set overall. Even if a punch does become unusable, you have a replacement option quickly without looking around the garage to try and MacGyver something.
Use for the Purpose Intended(28.09.2014)
These are absolutely superb tools. The reviews that complain about the punches bending have apparently not grasped the concept of "Starter Punches".You can't take a 1/16" or 3/32" punch with a 1" or more shaft length and start beating on them to get a tight pin started out. They will ALL break or bend, Starret, Mayhew, etc. included. Get a cheap punch and cut/grind the shaft to 1/4" long and use them to get the pin started. This is particularly true for AR gas block tapered pins.