WOOD PLUS
PRE-FINISHED REPLACEMENT SHOTGUN BUTTSTOCKS

984000008

Provides A Factory Quality Fit With Hardly Any Work; Matches The Original Contour Of The Factory Stock

Classic, American Walnut stocks are sanded and given a three-coat, Danish oil finish to provide excellent weather resistance and durability. Quality, straight-grained wood looks sharp and is easy to touch up if the stock is nicked or dinged. Includes plastic buttplate. 95% inletted and ready to install; only requires minor fitting.

SPECS: Walnut, straight grain, no figure. Accepts original hardware. Matches factory length of pull; Youth models are shorter. Browning A-5 forend fits 12 gauge, 5-shot. Remington 11 forend is 12 gauge only; drilled to accept factory detent. Savage 94 forend comes relieved for .410 bore; can be opened up for 12 and 20 gauge.

Plus...

Fournit une qualité d'usine avec pratiquement aucun travail ; Matches le Contour Original du Stock usine

Classique, noyer américain, les stocks sont poncés et donnés une huile triple épaisseur, danoise terminer pour offrir durabilité et excellente résistance aux intempéries. Qualité, présente un grain de bois semble forte et est facile à retoucher si le stock est entaillé ou sonné. Comprend la plaque de crosse en plastique. inletted de 95 % et prêt à installer ; suffit d'ajustement mineur.

Spécifications : noyer, fil droit, aucun chiffre. Accepte le matériel original. Course usine matches de phase ; Modèles de jeunesse sont plus courtes. Jauge de longuesse Browning A-5 fits 12, 5-shot. Remington 11 têtière est calibre 12 seulement ; forés pour accepter le cran de l'usine. Savage 94 longuesse est relevée pour.410 alésage ; peut être ouvert pour calibre 12 et 20.

Plus...

Évaluations client de WOOD PLUS SAVAGE 311 BUTTSTOCK

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3

Buttstock Bolt Hole (12.04.2016)

Received Mossberg 20 g buttstock from Brownells 984-000- 057WB - the buttstock bolt hole length was incorrect, for the standard Mossberg hardware (bolt & washers), to adequately engage the receiver -required washer and lock washer also used and ordered from Brownell's. As verified by e-mail from Brownell technical staff - bolt hole requires additional boring.

thumbs down (16.06.2015)

Recoil spring tube is not straight causing problems getting the stock nut and washer on. Where it attaches to the actual reciever, it is nearly 1/8 of an inch larger so serious sanding is required and if you already lacquered it, you just wasted a lot of time. Color is off from factory. Don't waste your time or money and just go to Remington for a good stock.

Beautiful Wooden 870 Butt Stock (27.10.2009)

The Stock is a beautiful piece of wood! But, there are a couple of things different from the 870 original... First thing I noticed was that there is no checkering on the grip portion and the wood finish is a satin finish! Secondly, the butt plate is a hard flat plate, not a shock absorbing rubber pad!

Fits perfect! Look is gorgeous! (13.09.2017)

Perfect fit and looks gorgeous. If you expect a rubber butt plate and a checker pattern, best you research your model prior to purchase fool. Geez

Nice stock (03.03.2015)

Very nice looking & well made stock. Did require minor fitting & drilling of the tang screw hole which is not recommended for the novice. I would have given a 5 star rating however the description states that it "Matches The Original Contour Of The Factory Stock" but it is actually very different. Customer was "ok" with it but stated that it really changed the overall feel & handling of the gun. For the price it is a bargain.

Poor fit! (04.05.2011)

Butt stock is a poor fit for the winchester model 37, 16 guage shotgun.

Excellent replacement (03.04.2011)

As described, it required a small amount of fitting. Good quality wood for a field grade shotgun. Used it on a 1924 Model 12 that I converted to a "trench gun." Color of the supplied stock was so close to the original corn-cob forend I decided not to refinish the stock.

Lire 7 plus d'avis sur brownells.com

124.9 134.9 8 CHF

Référence: 984000008
WOOD PLUS SAVAGE 311 BUTTSTOCK
Ref Fabricant: NONE Classique, noyer américain, les stocks sont poncés et donnés une huile triple épaisseur, danoise terminer pour offrir durabilité et excellente résistance aux intempéries. Qualité, présente un grain de bois semble forte et est facile à retoucher si le stock est entaillé ou sonné. Comprend la plaque de crosse en plastique. inletted de 95 % et prêt à installer ; suffit d'ajustement mineur.

124.9 CHF 3 CHF 124.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Calibre: Calibre 12 Couleur: Oil Manufacture: Savage Arms Matériaux: Wood Modèle: 311, Stevens 311 Spécificité: Remplacement

WOOD PLUS PRE-FINISHED REPLACEMENT SHOTGUN BUTTSTOCKS

Évaluations client de WOOD PLUS SAVAGE 311 BUTTSTOCK

Caractéristiques

Détails de l'article

Évaluations client de WOOD PLUS SAVAGE 311 BUTTSTOCK

WOOD PLUS
PRE-FINISHED REPLACEMENT SHOTGUN BUTTSTOCKS