Exclusive, rubber O-Ring gently centers the jag and patch in the muzzle, and all the way through the bore, to help prevent muzzle damage. Pointed, brass jag firmly holds all types of patches for efficient swabbing during cleaning. 12 gauge, 8 - 32 fits standard rifle cleaning rod. 12 gauge, 5/16"- 27 fits standard shotgun cleaning rod.
SPECS: Brass, 1½" (3.8cm) long, All are 8 - 32 thread except 12 gauge 5/16"- 27.
Altro...
O-ring in gomma protegge la corona da danni
Esclusivo, gomma o-ring centri delicatamente la jag e patch nel muso e tutto il modo attraverso il foro, per aiutare a prevenire danni di muso. Appuntito, jag ottone tiene saldamente tutti i tipi di patch per scovolatura efficiente durante la pulizia. calibro 12, 8-32 si adatta standard fucile bacchetta di pulizia. calibro 12, 5/16"-27 si adatta standard fucile asta di pulizia. O-ring di ricambio - ogni pacchetto contiene 12 O-ring.
Specifiche: ottone, 1½"(3.8 cm) di lunghezza, tutti sono 8-32 thread eccetto 5/16"-27 calibro 12.
Altro...
Punteggi dei clienti per ACCUPRO .50 CAL. PRO JAG
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.5
Awesome!(12.09.2010)
I really like this jag. The fit and finish is perfect and the o-ring really helps to get all the crud out of the rifling. The .45 was the first one I ordered, but I will be completing all the calibers I shoot with this jag. A+
Does not fit bore(28.03.2011)
This jag is beautifully machined and nicely conceived in concept but it simply is too large to fit down a .45 cold forged hexagonally-rifled bore with standard properly-sized cotton patches. I measured it and it was a full .050 larger in OD than my other previously-used jags that were a nice snug fit in this caliber.
Simply put, it requires major lathe work to get it to carry a patch down the bore.
Too big and too small(30.03.2013)
I bought this Jag for my 1911 in .45ACP. The end of the Jag is actually too small for a patch to have a snug fit through the barrel. When the patch gets over the o-ring it's too big to pass through the barrel. You have to cut the patch down so it's short of the o-ring.
An excellent jag.....(25.06.2010)
I am a benchrest shooter, I have been using these jags for over 10 years. I like the way these jags ride the o ring down the bore & keep the brass from contacting the lands. I'm glad you carry these, after Accupro went out of business I wasn't sure I would be able to find them. Now I get a few every chance I get so I won't run out in the future.....
N. prodotto: 745000010 ACCUPRO .50 CAL. PRO JAG Parti Fabbricante: 22500 Esclusivo, gomma o-ring centri delicatamente la jag e patch nel muso e tutto il modo attraverso il foro, per aiutare a prevenire danni di muso. Appuntito, jag ottone tiene saldamente tutti i tipi di patch per scovolatura efficiente durante la pulizia. calibro 12, 8-32 si adatta standard fucile bacchetta di pulizia. calibro 12, 5/16"-27 si adatta standard fucile asta di pulizia. O-ring di ricambio - ogni pacchetto contiene 12 O-ring.
19.9CHF48CHF 19.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Calibro:
50 Caliber
Peso della spedizione: 0.018kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
N. prodotto: 745022270 ACCUPRO .270/7MM CALIBER PRO JAG Parti Fabbricante: 22277757883222707 Esclusivo, gomma o-ring centri delicatamente la jag e patch nel muso e tutto il modo attraverso il foro, per aiutare a prevenire danni di muso. Appuntito, jag ottone tiene saldamente tutti i tipi di patch per scovolatura efficiente durante la pulizia. calibro 12, 8-32 si adatta standard fucile bacchetta di pulizia. calibro 12, 5/16"-27 si adatta standard fucile asta di pulizia. O-ring di ricambio - ogni pacchetto contiene 12 O-ring.
19.9CHF30CHF 19.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 745022375 ACCUPRO .375/380 CALIBER PRO JAG Parti Fabbricante: 22375CS757883223759 Esclusivo, gomma o-ring centri delicatamente la jag e patch nel muso e tutto il modo attraverso il foro, per aiutare a prevenire danni di muso. Appuntito, jag ottone tiene saldamente tutti i tipi di patch per scovolatura efficiente durante la pulizia. calibro 12, 8-32 si adatta standard fucile bacchetta di pulizia. calibro 12, 5/16"-27 si adatta standard fucile asta di pulizia. O-ring di ricambio - ogni pacchetto contiene 12 O-ring.
18.9CHF32CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Exclusive, rubber O-Ring gently centers the jag and patch in the muzzle, and all the way through the bore, to help prevent muzzle damage. Pointed, brass jag firmly holds all types of patches for efficient swabbing during cleaning. 12 gauge, 8 - 32 fits standard rifle cleaning rod. 12 gauge, 5/16"- 27 fits standard shotgun cleaning rod.
SPECS: Brass, 1½" (3.8cm) long, All are 8 - 32 thread except 12 gauge 5/16"- 27.
Altro...
O-ring in gomma protegge la corona da danni
Esclusivo, gomma o-ring centri delicatamente la jag e patch nel muso e tutto il modo attraverso il foro, per aiutare a prevenire danni di muso. Appuntito, jag ottone tiene saldamente tutti i tipi di patch per scovolatura efficiente durante la pulizia. calibro 12, 8-32 si adatta standard fucile bacchetta di pulizia. calibro 12, 5/16"-27 si adatta standard fucile asta di pulizia. O-ring di ricambio - ogni pacchetto contiene 12 O-ring.
Specifiche: ottone, 1½"(3.8 cm) di lunghezza, tutti sono 8-32 thread eccetto 5/16"-27 calibro 12.
Altro...
Punteggi dei clienti per ACCUPRO .50 CAL. PRO JAG
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.5
Awesome!(12.09.2010)
I really like this jag. The fit and finish is perfect and the o-ring really helps to get all the crud out of the rifling. The .45 was the first one I ordered, but I will be completing all the calibers I shoot with this jag. A+
Does not fit bore(28.03.2011)
This jag is beautifully machined and nicely conceived in concept but it simply is too large to fit down a .45 cold forged hexagonally-rifled bore with standard properly-sized cotton patches. I measured it and it was a full .050 larger in OD than my other previously-used jags that were a nice snug fit in this caliber.
Simply put, it requires major lathe work to get it to carry a patch down the bore.
Too big and too small(30.03.2013)
I bought this Jag for my 1911 in .45ACP. The end of the Jag is actually too small for a patch to have a snug fit through the barrel. When the patch gets over the o-ring it's too big to pass through the barrel. You have to cut the patch down so it's short of the o-ring.
An excellent jag.....(25.06.2010)
I am a benchrest shooter, I have been using these jags for over 10 years. I like the way these jags ride the o ring down the bore & keep the brass from contacting the lands. I'm glad you carry these, after Accupro went out of business I wasn't sure I would be able to find them. Now I get a few every chance I get so I won't run out in the future.....