Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

APEX TACTICAL SPECIALTIES INC
RED M&P SHIELD ACTION ENHANCEMENT TRIGGER

856008005581 100017520
The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a red anodized, solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%.  It features a smooth face with a center mounted pivoting safety that maintains factory safety values.  The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex Shield Duty/Carry Kit was designed to provide the M&P Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter(based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset.  The kit itself is engineered to be drop-in and should not require further gunsmithing.  However, Armorer or gunsmith installation of the Ultimate Striker Block into the Shield slide is strongly recommended. The Shield Action Enhancement Trigger Only is perfect for use with the M&P Shield already equipped with the apex Shield Duty/Carry Kit.  Works with all Smith & Wesson M&P Shield pistols in 9mm and .40 calibers, does not work in the Shield 45.  

SPECS: Kit includes:  Red Anodized Aluminum Shield Action Enhancement Trigger, Shield Duty/Carry Kit(Fully machined sear, Ultimate Striker Block, Striker Block Spring, Sear Spring(1/8"), 4lb rated Trigger Return Spring, Trigger Return Spring Installation Shield Slave Pin, Talon Tactical Tool). Trigger Only includes:  Red Anodiezed Aluminum Shield Action Enhancement Trigger, Shield Trigger Return Spring Installation Slave Pin.
 

259.9 259.9 2 CHF
N. prodotto: 100017520
APEX TACTICAL SPECIALTIES INC RED M&P SHIELD ACTION ENHANCEMENT TRIGGER KIT
Parti Fabbricante: 100-056 856008005581 Il Kit di scudo azione valorizzazione Trigger direttamente sostituisce il trigger in fabbrica a battente con corpo di un trigger di alluminio anodizzato, tinta di rosso che riduce pre-viaggio e sovra-viaggio di circa il 20%. È dotato di una superficie liscia con una sicurezza basculante centro montato che mantiene i valori di sicurezza di fabbrica. La barra di sicurezza centro girevole montato previene accidentali creando un blocco grilletto che non stacca a meno che il tiratore pone il dito direttamente sul viso trigger. Il Kit di dovere/Carry scudo Apex è stato progettato per fornire il proprietario di pistola M & P scudo un grilletto liscio, coerente che è di circa 2 libbre più leggeri (basati sulle variazioni le tolleranze di fabbrica) con i vantaggi della sovra- corsa più corta di e più rilevabili attivare la reimpostazione. Il kit stesso è stato progettato per essere drop-in e non richiede ulteriori gunsmithing. Tuttavia, è consigliabile Armorer o installazione di armaiolo del blocco attaccante Ultimate nella diapositiva scudo. Scudo d'azione Enhancement Trigger solo è perfetto per l'uso con la M & P scudo già equipaggiato con l'apice Kit scudo Duty/Carry. Funziona con tutte le pistole Smith & Wesson M & P scudo in 9mm e.40 calibri, non funziona nei 45 scudo.
259.9 CHF 4 CHF 259.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Smith & Wesson Finitura: Red Modello: M&P Shield

Caratteristiche

Adatto per: Smith & Wesson Finitura: Red Modello: M&P Shield Peso della spedizione: 0.091kg Altezza di spedizione: 28mm Larghezza di spedizione: 94mm Lunghezza di spedizione: 97mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c



N. prodotto: 100017521
APEX TACTICAL SPECIALTIES INC RED M&P SHIELD ACTION ENHANCEMENT TRIGGER ONLY
Parti Fabbricante: 100-057 856008005598 Il Kit di scudo azione valorizzazione Trigger direttamente sostituisce il trigger in fabbrica a battente con corpo di un trigger di alluminio anodizzato, tinta di rosso che riduce pre-viaggio e sovra-viaggio di circa il 20%. È dotato di una superficie liscia con una sicurezza basculante centro montato che mantiene i valori di sicurezza di fabbrica. La barra di sicurezza centro girevole montato previene accidentali creando un blocco grilletto che non stacca a meno che il tiratore pone il dito direttamente sul viso trigger. Il Kit di dovere/Carry scudo Apex è stato progettato per fornire il proprietario di pistola M & P scudo un grilletto liscio, coerente che è di circa 2 libbre più leggeri (basati sulle variazioni le tolleranze di fabbrica) con i vantaggi della sovra- corsa più corta di e più rilevabili attivare la reimpostazione. Il kit stesso è stato progettato per essere drop-in e non richiede ulteriori gunsmithing. Tuttavia, è consigliabile Armorer o installazione di armaiolo del blocco attaccante Ultimate nella diapositiva scudo. Scudo d'azione Enhancement Trigger solo è perfetto per l'uso con la M & P scudo già equipaggiato con l'apice Kit scudo Duty/Carry. Funziona con tutte le pistole Smith & Wesson M & P scudo in 9mm e.40 calibri, non funziona nei 45 scudo.
Avvisa quando diventa disponibile
Non disponibile.
Caratteristiche: Adatto per: Smith & Wesson Finitura: Red Modello: M&P Shield
The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a red anodized, solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%.  It features a smooth face with a center mounted pivoting safety that maintains factory safety values.  The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex Shield Duty/Carry Kit was designed to provide the M&P Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter(based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset.  The kit itself is engineered to be drop-in and should not require further gunsmithing.  However, Armorer or gunsmith installation of the Ultimate Striker Block into the Shield slide is strongly recommended. The Shield Action Enhancement Trigger Only is perfect for use with the M&P Shield already equipped with the apex Shield Duty/Carry Kit.  Works with all Smith & Wesson M&P Shield pistols in 9mm and .40 calibers, does not work in the Shield 45.  

SPECS: Kit includes:  Red Anodized Aluminum Shield Action Enhancement Trigger, Shield Duty/Carry Kit(Fully machined sear, Ultimate Striker Block, Striker Block Spring, Sear Spring(1/8"), 4lb rated Trigger Return Spring, Trigger Return Spring Installation Shield Slave Pin, Talon Tactical Tool). Trigger Only includes:  Red Anodiezed Aluminum Shield Action Enhancement Trigger, Shield Trigger Return Spring Installation Slave Pin.
 

Newsletter