Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

MANSON PRECISION
REM CHOKE-STYLE TOOLING

513046012
Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
334.9 334.9 1 CHF
Référence: 513046012
MANSON PRECISION 12 GAUGE REM-CHOKE REAMER
Ref Fabricant: RC12GAR Une méthode rapide et facile pour installer les chokes à l'aide d'un tour (peut être fait à la main, cependant, une tour donne des résultats supérieurs). Robinet et alésoir sont rectifiés de précision en acier haute vitesse et utilisent les mêmes bagues pilotes interchangeables. Alésoir possède un relief fin amélioré qui permet une coupe plus rapide. Bagues de pilote sont disponibles par incréments de diamètre de. 001" et ils sont 2" de long pour précis alésage alignement. Usine instructions sont incluses. Remarque : Lire et comprendre les exigences d'installation sur la page 62 avant de continuer. Pour de meilleurs résultats, retirez tout Starter existant avec l'Angle expansion Starter alésoir avant d'utiliser l'alésoir de Loon Lake Starter. Cliquez ici pour les besoins d'une installation correcte. Utilise le même robinet et traversées comme Win-Choke, exige un alésoir différent sur la position des fils dans un emplacement différent. Barils enfilés vers ce système acceptent Rem-Starter-style et tubes usine Remington.
334.9 CHF 0 CHF 334.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Calibre: Calibre 12 Manufacture: Remington Modèle: Universal Shotguns

Caractéristiques

Calibre: Calibre 12 Manufacture: Remington Modèle: Universal Shotguns Poids du colis: 0.318kg Hauteur d'expédition: 28mm Largeur d'expédition: 36mm Longueur d'expédition: 229mm

Détails de l'article

Fabriqué au USA



Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
Newsletter