EGW Remington 700, 722, 40X Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket head Allen screws and wrench.
Plus...
Aucune augmentation de précision de fioritures pour fusils populaires
EGW Remington 700, 722, 40 X Action courte portée Bases. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
SPECS : Tactique léger - 6061 T6 aluminium, anodisé, finition noire mate. Comprend tête creuse vis Allen et une clé.
Plus...
Évaluations client de EGW REM 700, 722, 40X SHORT ACTION 0 MOA
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.3
Good fit(18.03.2015)
This did just as advertised. Fit right on a Remington 700 SPS with no effort. Torqued to 20 inch pounds and it was solid.
I have not received feedback on the 20MOA part of the mount, so more later.
Do Not Buy This(17.08.2009)
I bought a EGW mount for my Rem 700. When manufatured correctly a scope mount will lay passively prior to being screwed down. The base I recieved was not well made. With light screw tension on the rear screws the base was .150" off the reciever in the front. Intead of returning it I tried to lap it in. Things only got worse. Save your time and spend money on a higher quality mount. Cheap is sometimes CHEAP.
Buying one for each of my rifles(25.10.2009)
Pretty nice for the $$. Works great and fit nice and tight.
EGW bases work great.(21.07.2010)
I'm a machinist. I buy the EGW base because I can make one like it but it's gonna take more time than this unit costs. I can tell you from using machinists measuring tools that every one I have seen has been 100% GTG. The Remington 700 action? Not so much. You often have to bed a base in because the receiver is out of spec.
Also of note - the self centering screws that come with the EGW do a great job of preventing movement. I've never seen an EGW base move.
Re: the base being wrong(02.05.2011)
The Remington 700 action is the problem not the base. They turn the front ring of the receiver, they hand finish the rear and that is no where level as it should me. Another commenter here said you have to bed the scope mount and some times shim them with feeler gauge stock as I have had to do recently.
A well made base(24.06.2011)
Before I ordered this base I read the other four reviews. The base arrived yesterday and the only way it could fit better would be if it had been custom made for my Rem 700 SA. This base is being installed on a live varmint rifle to get the scope back where it needs to be with the rings as far apart as possible which this base allows.
Fantastic Base-I use on all my Rem 700's(21.07.2014)
I use these exclusively on all my Remington 700's. I run a small custom rifle shop and would highly recommend this product to anyone. 15 years Law Enforcement and avid Hunter and Target shooter... this base will literally do it all. For the money, there is none better!
Référence: 296000089 EGW REM 700, 722, 40X SHORT ACTION 0 MOA Ref Fabricant: 40000841370104970 EGW Remington 700, 722, 40 X Action courte portée Bases. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
64.9CHF0CHF 64.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 296000377 EGW REMINGTON 700, 722, 40X SHORT ACTION 20 MOA SILVER Ref Fabricant: 40012841370105021 EGW Remington 700, 722, 40 X Action courte portée Bases. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
Référence: 296000210 EGW REM 700, 722, 40X SHORT ACTION 20 MOA Ref Fabricant: 40002841370104994 EGW Remington 700, 722, 40 X Action courte portée Bases. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
64.9CHF0CHF 64.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 296000375 EGW REMINGTON 700, 722, 40X SHORT ACTION 15 MOA Ref Fabricant: 40001841370104987 EGW Remington 700, 722, 40 X Action courte portée Bases. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
64.9CHF0CHF 64.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
EGW Remington 700, 722, 40X Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket head Allen screws and wrench.
Plus...
Aucune augmentation de précision de fioritures pour fusils populaires
EGW Remington 700, 722, 40 X Action courte portée Bases. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
SPECS : Tactique léger - 6061 T6 aluminium, anodisé, finition noire mate. Comprend tête creuse vis Allen et une clé.
Plus...
Évaluations client de EGW REM 700, 722, 40X SHORT ACTION 0 MOA
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.3
Good fit(18.03.2015)
This did just as advertised. Fit right on a Remington 700 SPS with no effort. Torqued to 20 inch pounds and it was solid.
I have not received feedback on the 20MOA part of the mount, so more later.
Do Not Buy This(17.08.2009)
I bought a EGW mount for my Rem 700. When manufatured correctly a scope mount will lay passively prior to being screwed down. The base I recieved was not well made. With light screw tension on the rear screws the base was .150" off the reciever in the front. Intead of returning it I tried to lap it in. Things only got worse. Save your time and spend money on a higher quality mount. Cheap is sometimes CHEAP.
Buying one for each of my rifles(25.10.2009)
Pretty nice for the $$. Works great and fit nice and tight.
EGW bases work great.(21.07.2010)
I'm a machinist. I buy the EGW base because I can make one like it but it's gonna take more time than this unit costs. I can tell you from using machinists measuring tools that every one I have seen has been 100% GTG. The Remington 700 action? Not so much. You often have to bed a base in because the receiver is out of spec.
Also of note - the self centering screws that come with the EGW do a great job of preventing movement. I've never seen an EGW base move.
Re: the base being wrong(02.05.2011)
The Remington 700 action is the problem not the base. They turn the front ring of the receiver, they hand finish the rear and that is no where level as it should me. Another commenter here said you have to bed the scope mount and some times shim them with feeler gauge stock as I have had to do recently.
A well made base(24.06.2011)
Before I ordered this base I read the other four reviews. The base arrived yesterday and the only way it could fit better would be if it had been custom made for my Rem 700 SA. This base is being installed on a live varmint rifle to get the scope back where it needs to be with the rings as far apart as possible which this base allows.
Fantastic Base-I use on all my Rem 700's(21.07.2014)
I use these exclusively on all my Remington 700's. I run a small custom rifle shop and would highly recommend this product to anyone. 15 years Law Enforcement and avid Hunter and Target shooter... this base will literally do it all. For the money, there is none better!