EGW Remington 783 Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mehr...
EGW Remington 783 Short Action Scope Bases. Verleihen Sie Ihrer Schrotflinte die Vielseitigkeit einer einteiligen Picatinny-Zielfernrohrschiene ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus stranggepresstem Aluminium mit Picatinny-Schlitz- und Schienenabstand, der schnelle und einfache Änderungen des Augenabstands sowie eine grosse Flexibilität bei der Auswahl des Bereichs ermöglicht. Gebohrt, um die werkseitigen Montagelöcher am Empfänger der Pistole zu befestigen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrringe. Leichte taktische Reittiere haben einen gefrästen Mittelkanal zur Gewichtsreduzierung. Kreuzschlitze in voller Breite entsprechen den MIL-STD 1913-Spezifikationen bis +/-. 002 ". Hergestellt aus ultra-starrem, extrudiertem 6061 T6-Aluminium. Inklusive Torx®-Innensechskantschrauben und Schraubenschlüssel ein tropfen blauer loctite zum montieren.
Mehr...
Kundenbewertungen zu EGW REMINGTON 783 SHORT ACTION 0 MOA
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3.5
Good quality, good price, but...(18.06.2015)
Mounted this Rail on my Remington 783 short action on .308 (great, accurate rifle) and installation went just fine, screws fitted properly and the rail sat just fine, no need to lap it. I had to change the scope rings from short to medium height because the Nikon scope would rest on top of the rail in the front (the part that goes over the Barrel nut) just be aware of that, in case you own a short scope. The rail added height also I think it needs to be thinner. Other than that is a great product. I would recommend it.
Good construction / Bad fitment(17.05.2017)
I picked up this rail a few days back, right off the bat i was very dissapointed as i could not operate the bolt after installation. The extended piece of rail over the rear of the bolt just slightly blocked the bolt from opening and closing. So be prepared to do some light maching to make this rail work properly.
Artikel-Nr.: 296000235 EGW REMINGTON 783 SHORT ACTION 0 MOA Herstellerproduktnummer: 40910841370105335 EGW Remington 783 Short Action Scope Bases. Verleihen Sie Ihrer Schrotflinte die Vielseitigkeit einer einteiligen Picatinny-Zielfernrohrschiene ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus stranggepresstem Aluminium mit Picatinny-Schlitz- und Schienenabstand, der schnelle und einfache Änderungen des Augenabstands sowie eine grosse Flexibilität bei der Auswahl des Bereichs ermöglicht. Gebohrt, um die werkseitigen Montagelöcher am Empfänger der Pistole zu befestigen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrringe. Leichte taktische Reittiere haben einen gefrästen Mittelkanal zur Gewichtsreduzierung. Kreuzschlitze in voller Breite entsprechen den MIL-STD 1913-Spezifikationen bis +/-. 002 ". Hergestellt aus ultra-starrem, extrudiertem 6061 T6-Aluminium. Inklusive Torx®-Innensechskantschrauben und Schraubenschlüssel ein tropfen blauer loctite zum montieren.
Art:
Picatinny Rail
Farbe:
Black
Finish:
Black
Hersteller/Modell:
Remington
Material:
Aluminum
Modell:
783
Versandgewicht: 0.045kgVersandhöhe: 18mmVersandbreite: 79mmVersandlänge: 224mm
Artikeldetails
Made in USA
Artikel-Nr.: 296000379 EGW REMINGTON 783 SHORT ACTION 20 MOA Herstellerproduktnummer: 40912841370112609 EGW Remington 783 Short Action Scope Bases. Verleihen Sie Ihrer Schrotflinte die Vielseitigkeit einer einteiligen Picatinny-Zielfernrohrschiene ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus stranggepresstem Aluminium mit Picatinny-Schlitz- und Schienenabstand, der schnelle und einfache Änderungen des Augenabstands sowie eine grosse Flexibilität bei der Auswahl des Bereichs ermöglicht. Gebohrt, um die werkseitigen Montagelöcher am Empfänger der Pistole zu befestigen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrringe. Leichte taktische Reittiere haben einen gefrästen Mittelkanal zur Gewichtsreduzierung. Kreuzschlitze in voller Breite entsprechen den MIL-STD 1913-Spezifikationen bis +/-. 002 ". Hergestellt aus ultra-starrem, extrudiertem 6061 T6-Aluminium. Inklusive Torx®-Innensechskantschrauben und Schraubenschlüssel ein tropfen blauer loctite zum montieren.
64.9CHF0CHF 64.90
*
Wird nach Ihrer Bestellung beim Lieferanten beschafft Lieferzeit ca. 8-16 Wochen.
EGW Remington 783 Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Mehr...
EGW Remington 783 Short Action Scope Bases. Verleihen Sie Ihrer Schrotflinte die Vielseitigkeit einer einteiligen Picatinny-Zielfernrohrschiene ohne Bohren oder Gewindeschneiden. Präzisionsgefertigt aus stranggepresstem Aluminium mit Picatinny-Schlitz- und Schienenabstand, der schnelle und einfache Änderungen des Augenabstands sowie eine grosse Flexibilität bei der Auswahl des Bereichs ermöglicht. Gebohrt, um die werkseitigen Montagelöcher am Empfänger der Pistole zu befestigen. Akzeptiert Picatinny- oder Weaver-Zielfernrohrringe. Leichte taktische Reittiere haben einen gefrästen Mittelkanal zur Gewichtsreduzierung. Kreuzschlitze in voller Breite entsprechen den MIL-STD 1913-Spezifikationen bis +/-. 002 ". Hergestellt aus ultra-starrem, extrudiertem 6061 T6-Aluminium. Inklusive Torx®-Innensechskantschrauben und Schraubenschlüssel ein tropfen blauer loctite zum montieren.
Mehr...
Kundenbewertungen zu EGW REMINGTON 783 SHORT ACTION 0 MOA
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3.5
Good quality, good price, but...(18.06.2015)
Mounted this Rail on my Remington 783 short action on .308 (great, accurate rifle) and installation went just fine, screws fitted properly and the rail sat just fine, no need to lap it. I had to change the scope rings from short to medium height because the Nikon scope would rest on top of the rail in the front (the part that goes over the Barrel nut) just be aware of that, in case you own a short scope. The rail added height also I think it needs to be thinner. Other than that is a great product. I would recommend it.
Good construction / Bad fitment(17.05.2017)
I picked up this rail a few days back, right off the bat i was very dissapointed as i could not operate the bolt after installation. The extended piece of rail over the rear of the bolt just slightly blocked the bolt from opening and closing. So be prepared to do some light maching to make this rail work properly.