EGW Remington 783 Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Plus...
Bases de EGW Remington 783 Action courte portée. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
Plus...
Évaluations client de EGW REMINGTON 783 SHORT ACTION 0 MOA
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Good quality, good price, but...(18.06.2015)
Mounted this Rail on my Remington 783 short action on .308 (great, accurate rifle) and installation went just fine, screws fitted properly and the rail sat just fine, no need to lap it. I had to change the scope rings from short to medium height because the Nikon scope would rest on top of the rail in the front (the part that goes over the Barrel nut) just be aware of that, in case you own a short scope. The rail added height also I think it needs to be thinner. Other than that is a great product. I would recommend it.
Good construction / Bad fitment(17.05.2017)
I picked up this rail a few days back, right off the bat i was very dissapointed as i could not operate the bolt after installation. The extended piece of rail over the rear of the bolt just slightly blocked the bolt from opening and closing. So be prepared to do some light maching to make this rail work properly.
Référence: 296000235 EGW REMINGTON 783 SHORT ACTION 0 MOA Ref Fabricant: 40910841370105335 Bases de EGW Remington 783 Action courte portée. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
64.9CHF3CHF 64.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 296000379 EGW REMINGTON 783 SHORT ACTION 20 MOA Ref Fabricant: 40912841370112609 Bases de EGW Remington 783 Action courte portée. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
64.9CHF0CHF 64.90
*
Sera acheté auprès du fournisseur après votre commande Délai de livraison environ écialorderPeriod semaines.
EGW Remington 783 Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Plus...
Bases de EGW Remington 783 Action courte portée. Ajouter la polyvalence d’un monocoque rails Picatinny pour votre fusil sans perçage ni taraudage. Précision usinées à partir d’aluminium extrudé avec espacement de slot-et-rail Picatinny permettant des changements rapides et simples à dégagement oculaire, plus grande flexibilité dans le choix de portée. Forés pour ajuster les trous de montage usine portée sur le récepteur de l’arme. Accepte les anneaux portée Picatinny ou Weaver. Les montures tactiques légers ont un canal centre blanchi pour la réduction de poids. Pleine largeur Croix-machines à sous sont calibrés selon spécifications MIL-STD 1913 à +/-. 002". Usinés en aluminium 6061 T6 extrudé ultra rigide. Comprend une clé et vis Torx®. EGW recommande 20 pouces lbs de couple et une goutte de loctite bleu pour le montage.
Plus...
Évaluations client de EGW REMINGTON 783 SHORT ACTION 0 MOA
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Good quality, good price, but...(18.06.2015)
Mounted this Rail on my Remington 783 short action on .308 (great, accurate rifle) and installation went just fine, screws fitted properly and the rail sat just fine, no need to lap it. I had to change the scope rings from short to medium height because the Nikon scope would rest on top of the rail in the front (the part that goes over the Barrel nut) just be aware of that, in case you own a short scope. The rail added height also I think it needs to be thinner. Other than that is a great product. I would recommend it.
Good construction / Bad fitment(17.05.2017)
I picked up this rail a few days back, right off the bat i was very dissapointed as i could not operate the bolt after installation. The extended piece of rail over the rear of the bolt just slightly blocked the bolt from opening and closing. So be prepared to do some light maching to make this rail work properly.