Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

VOLQUARTSEN
REMINGTON 870/1100 EXACT EDGE EXTRACTOR

810162013929 930000144

The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact. The extractor features a very precise hook point. It is hardened to a RC 58-60 to withstand years of use and still maintain its edge. We are able to hold the tolerances to +/-.0001" by utilizing the EDM manufacturing process. Replaces Remington part #16176 and fits 870, 12, 20 and 1100, 12, 20.

SPECS: For Remington 870 and 1100 models.

Plus...

L'extracteur de bord Exact est fabriqué selon un processus EDM pour produire des tolérances harassantes. Le nouvel extracteur ne perdra pas son bord sous impact. L'extracteur dispose d'un point de crochet très précis. Il est durci à une RC 58-60 à résister à des années d'utilisation et toujours maintenir son avantage. Nous sommes en mesure de tenir les tolérances à +/-. 0001" en utilisant le modèle EDM, processus de fabrication. Remplace la partie Remington #16176 et convient pour 870, 12, 20 et 1100, 12, 20.

SPECS : pour Remington 870 et modèles 1100.

Plus...

Évaluations client de VOLQUARTSEN REMINGTON 870/1100 EXACT EDGE EXTRACTOR

Nombre d'évaluations: 8
De brownells.com: 8
Note moyenne: 4.6

no better then remingtons (20.07.2016)

I bought these under the impression they would fit without any gun smithing wrong! save the money and get the remington extractor

Very nice, precision-made item (29.07.2016)

The Volquartsen Exact-Edge is a super replacement part. The fit is precise enough and the installation went fairly easy outside of the part where the locking pin and spring flew across the room.... despite my efforts to prevent that. Anyway, having recovered my truant parts, it went back together with no fuss. Full disclosure.... I haven't been to the range with it yet, but so far the function has been flawless. Much. much better than the chipped, worn extractor it replaced. In fact, I decided to replace the original, Remington MiM extractor on another 870P I'm customizing, with an Exact-Edge too.

Replaced original (19.01.2017)

I bought this to replace the original extractor on my 870 express made in 1988. The original was rounded off and didn't extract reliably. I replaced spring at same time. Install was easy, no modifications needed. Simple, quick, easy push in replacement.

Better than the original (04.12.2017)

Replaced the old original extractor and spring that was well worn and rounded. Was a fast and simple job. Havenât had a problem with the new one.

Amazing! (19.12.2017)

This product is amazing. it was shocking how poor the quality of the factory extractor was compared to this piece. Very easy to install, i did it without removing the bolt. Works perfectly. For a cheap, quality piece of mind upgrade, this thing is perfect.

<img width="500" src='/userdocs/reviewimages/342d3a8e-9498-48f6-99e4-6248b13ab531.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/a1989df3-cc22-4e3a-a807-e2ebab7e42ab.jpg' alt=''>

For More Positive Extractions (25.12.2017)

I used this product to replace my factory MIM extractor that came from the factory on my Express model. I had noticed that on certain brands of cheap ammo, the extractor once and a rare while missed the edge of the shell and continue rearward, leaving the shell partially extracted. Unloading a gun and taking the barrel off on the range to fix a jam is a headache, and embarrassing, to say the least.

I decided to go with this product instead of the Remington because of the stellar reviews. For a few buck more, why not?

Install is ridiculously simple, especially if you have a smaller flat head screwdriver. By depressing the plunger, you can swap out extractors in seconds. The replacement seems longer to me than the MIM part, and the hook is definitely sharper and more pronounced. Plus, it fit the gun seamlessly, so no polishing was necessary.

After installing this and polishing the chamber, extraction is much more positive. The new extractor seems to latch onto the shell more firmly, even with the cheapest birdshot ammunition. About 200 rounds later, the problem seems permanently fixed.

Quality Product; Fixes Common Issues (07.01.2018)

I bought an 18.5" Remington 870 Tactical a week ago and I started dry cycling it and noticed that the factory extractor's blunt nose started hitting the bottom of the ramp it's meant to slide up into in the barrel's perimeter. The issue was that the extractor was meeting the ramp at too low a position. It started making a notch at the base of the ramp. Not too happy about that. It's a brand new shotgun which I have yet to fire. I'm under the impression that any gun should be able to dry cycle many times without killing itself.

I was very happy to see that there was a quality alternative extractor, and the "exact edge" design is just what I needed, as it eliminates the dull face that the other one had and so it just slides right up the ramp when the bolt meets the barrel.

It's possible that the factory extractor would have done the job if I had rounds to cycle, as it may have pushed the extractor up a tad so it hit the ramp at the right spot, but I didn't like that the gun had a weakness even when dry cycling. I've also heard of the issue of rounds not being extracted properly, and that this does the job for that as well, so win-win. Sucks I had to fix a brand new gun, but I guess it's a lot like when software is released and they have day 1 patches.

This is a must-have for reliability-sake.

Great upgrade (17.05.2018)

Super easy to replace the original extractor with this upgrade. Made much better than the factory 870 extractor and reliable. I have had several thousand rounds through my 870 express supermag with this new extractor and it has preformed flawlessly.

Lire 8 plus d'avis sur brownells.com

47.9 47.9 1 CHF

Référence: 930000144
VOLQUARTSEN REMINGTON 870/1100 EXACT EDGE EXTRACTOR
Ref Fabricant: VCREM 810162013929 L'extracteur de bord Exact est fabriqué selon un processus EDM pour produire des tolérances harassantes. Le nouvel extracteur ne perdra pas son bord sous impact. L'extracteur dispose d'un point de crochet très précis. Il est durci à une RC 58-60 à résister à des années d'utilisation et toujours maintenir son avantage. Nous sommes en mesure de tenir les tolérances à +/-. 0001" en utilisant le modèle EDM, processus de fabrication. Remplace la partie Remington #16176 et convient pour 870, 12, 20 et 1100, 12, 20.

47.9 CHF 254 CHF 47.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: Remington Modèle: 1100, 870

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: Remington Modèle: 1100,870 Poids du colis: 0.011kg Hauteur d'expédition: 51mm Largeur d'expédition: 127mm Longueur d'expédition: 178mm

Détails de l'article

Fabriqué au USA

SPECS: For Remington 870 and 1100 models.

Plus...

SPECS : pour Remington 870 et modèles 1100.

Plus...

Évaluations client de VOLQUARTSEN REMINGTON 870/1100 EXACT EDGE EXTRACTOR

Nombre d'évaluations: 8
De brownells.com: 8
Note moyenne: 4.6

no better then remingtons (20.07.2016)

I bought these under the impression they would fit without any gun smithing wrong! save the money and get the remington extractor

Very nice, precision-made item (29.07.2016)

Replaced original (19.01.2017)

Better than the original (04.12.2017)

Replaced the old original extractor and spring that was well worn and rounded. Was a fast and simple job. Havenât had a problem with the new one.

Amazing! (19.12.2017)

For More Positive Extractions (25.12.2017)

Quality Product; Fixes Common Issues (07.01.2018)

Great upgrade (17.05.2018)

Lire 8 plus d'avis sur brownells.com

Poursuivre vos achats

BROWNELLS REMINGTON 870/1100/1187 12 GAUGE FOLLOWER SS NATURAL
REMINGTON 870/1100/1187 12GAUGE SHOTGUN FOLLOWERS

BROWNELLS

En stock

CHF 27.90 * CHF 26.90 - CHF 28.90*

TIMNEY REM 870 TRIGGER FIX
REM 870/1100/11-87 TRIGGER FIX

TIMNEY

En stock

CHF 214.90 *

Ressorts Détente

4.9

UNCLE MIKES 1" QD-100 LOOPS ONLY, 2-PAK
UNCLE MIKE'S QUICK DETACH 100 SLING SWIVEL

UNCLE MIKES

En stock

CHF 23.90 * CHF 23.90 - CHF 33.90*

Montage Anneaux Grenadière Intégré | Sets Anneaux de Grenadières pour Carabine

HIVIZ .420" FIBER OPTIC FRONT SIGHT STEEL MULTI
RIFLE FIBER OPTIC FRONT SIGHT

HIVIZ

En stock

CHF 36.90 * CHF 35.90 - CHF 36.90*

Guidons

GEISSELE AUTOMATICS SGB GEISSELE SUPER GAS BLOCK, BLACK
AR-15/M16 SUPER GAS BLOCK LOW PROFILE

GEISSELE AUTOMATICS

En stock

CHF 119.90 *

Verrous Gaz

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile