Fits inside face bolt recess to support back side of the extractor rivet while you peen the other end to lock a new extractor in place. Just like the one Remington uses with one "cut" added for better support when clamping in the vise.
SPECS: Blued, tool steel, hardened to Rc 60-63. 2-¼" (5.7cm) high x 1-¾" (4.4cm) wide x ½" (12.7mm)thick.
Altro...
Semplifica l'estrattore rivetto pallinatura
Si inserisce all'interno del viso bullone incavo per sostenere il lato posteriore del rivetto estrattore mentre si peen l'altra estremità per bloccare un nuovo estrattore in luogo. Proprio come quello Remington USA con un "taglio" aggiunto per un supporto migliore quando la morsa di serraggio.
Specifiche: brunita, strumento di acciaio, temprato a Rc 60-63. 2-¼"(5,7 cm) altezza x 1-¾" (4.4 cm) larghezza x ½"(12.7 mm) spessore.
Altro...
Punteggi dei clienti per BROWNELLS REMINGTON RIFLE EXTRACTOR RIVET ANVIL
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
'Must Have' tool for rivet installs(16.11.2009)
A handy little piece that makes the finished job look 'factory' perfect! Holds the rivet in place so you can peen it properly. All that is left to do is polish the outside of the bolt and you're done.
Better than home-made!(23.12.2010)
Once again, the right tool for the job. Simple, easy to use, solid and should last for years. Beats the shop made tool I've been using, and one person can do it. Not a very versatile tool, will do exactly the one job it was designed for. But, with so many Remington pumps, semi-autos and bolts in the world that use the riveted extractor, it will get used.
N. prodotto: 080740000 BROWNELLS REMINGTON RIFLE EXTRACTOR RIVET ANVIL050806108851 Si inserisce all'interno del viso bullone incavo per sostenere il lato posteriore del rivetto estrattore mentre si peen l'altra estremità per bloccare un nuovo estrattore in luogo. Proprio come quello Remington USA con un "taglio" aggiunto per un supporto migliore quando la morsa di serraggio.
64.9CHF12CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Remington
Modello:
Universal Rifles
Peso della spedizione: 0.227kgAltezza di spedizione: 13mmLarghezza di spedizione: 56mmLunghezza di spedizione: 157mm
Fits inside face bolt recess to support back side of the extractor rivet while you peen the other end to lock a new extractor in place. Just like the one Remington uses with one "cut" added for better support when clamping in the vise.
SPECS: Blued, tool steel, hardened to Rc 60-63. 2-¼" (5.7cm) high x 1-¾" (4.4cm) wide x ½" (12.7mm)thick.
Altro...
Semplifica l'estrattore rivetto pallinatura
Si inserisce all'interno del viso bullone incavo per sostenere il lato posteriore del rivetto estrattore mentre si peen l'altra estremità per bloccare un nuovo estrattore in luogo. Proprio come quello Remington USA con un "taglio" aggiunto per un supporto migliore quando la morsa di serraggio.
Specifiche: brunita, strumento di acciaio, temprato a Rc 60-63. 2-¼"(5,7 cm) altezza x 1-¾" (4.4 cm) larghezza x ½"(12.7 mm) spessore.
Altro...
Punteggi dei clienti per BROWNELLS REMINGTON RIFLE EXTRACTOR RIVET ANVIL
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
'Must Have' tool for rivet installs(16.11.2009)
A handy little piece that makes the finished job look 'factory' perfect! Holds the rivet in place so you can peen it properly. All that is left to do is polish the outside of the bolt and you're done.
Better than home-made!(23.12.2010)
Once again, the right tool for the job. Simple, easy to use, solid and should last for years. Beats the shop made tool I've been using, and one person can do it. Not a very versatile tool, will do exactly the one job it was designed for. But, with so many Remington pumps, semi-autos and bolts in the world that use the riveted extractor, it will get used.