Precision-made sights for rifles, both with and without ramp bases. The blade is gracefully contoured, sloping toward the front. Made of steel and nicely blued to look good on any gun. The BARREL MOUNTED FRONT SIGHT has rounded base sides for guns with the front sight dovetail cut directly into the barrel. “W” sights have a 17/32" (13.5mm) wide base. Barrel front sights are available with three beads, Pope’s Island Gold, flat faced gold available in 1/16" (1.6mm) diameter. Ivory, flat faced white polymer in 1/16" (1.6mm) diameter. BARREL MOUNTED - 17/32" wide base. View Chart To Determine Overall Sight/Ramp Heights View Sight Selection Chart
SPECS: Steel, blue, polished finish. .620" (15mm) long. ORDERING: Select the sight height required using the Marbles and/or Williams charts and determine which Sight Style, Bead Type and Width is needed from the info above. Using the chart beside this copy, find the correct Marbles Sight and note the 9 digit Ordering No. For example: If you need a Contoured Ramp Front Sight, “MR” width, .290" (7.4mm) high, with a 1/16" (1.6mm) gold bead, follow the Height listing to the .290" figure, read across on the “MR” line to the 1/16" gold bead and note the number: 579-502-911. 1" = (2.54cm)
Mirino frontale di precisione per fucili
Il RIFLE BARREL MOUNTED 1/16" 37-W FRONT SIGHT, realizzato in ottone dorato, è progettato per offrire prestazioni superiori e un'estetica accattivante. Questo mirino è adatto per canne di calibro .375" e si monta direttamente sulla canna del fucile.
Descrizione del prodotto
Realizzati con precisione, questi mirini sono disponibili sia con basi a rampa che senza. La lama è elegantemente sagomata, inclinata verso la parte anteriore. Costruiti in acciaio e finemente bluati, si adattano perfettamente a qualsiasi arma. Il MIRINO MONTATO SULLA CANNA presenta lati della base arrotondati per armi con il taglio del mirino direttamente nella canna. I mirini “W” hanno una base larga 17/32" (13.5mm).
Caratteristiche
- Materiale: Acciaio, finitura blu, lucidata.
- Dimensioni: .620" (15mm) di lunghezza.
Come ordinare
Seleziona l'altezza del mirino necessaria utilizzando i grafici di Marbles e/o Williams e determina quale Stile di Mirino, Tipo di Perla e Larghezza è necessaria dalle informazioni sopra. Utilizzando il grafico accanto a questo testo, trova il corretto Mirino Marbles e annota il numero d'ordine a 9 cifre. Ad esempio: se hai bisogno di un Mirino Frontale a Rampa Sagomato, larghezza “MR”, alto .290" (7.4mm), con una perla dorata da 1/16" (1.6mm), segui l'elenco dell'altezza fino al valore .290", leggi sulla linea “MR” fino alla perla dorata da 1/16" e annota il numero: 579-502-911.
1" = (2.54cm)