Precision-made sights for rifles, both with and without ramp bases. The blade is gracefully contoured, sloping toward the front. Made of steel and nicely blued to look good on any gun. The BARREL MOUNTED FRONT SIGHT has rounded base sides for guns with the front sight dovetail cut directly into the barrel. “W” sights have a 17/32" (13.5mm) wide base. Barrel front sights are available with three beads, Pope’s Island Gold, flat faced gold available in 3/32" (2.4mm) diameter. Ivory, flat faced white polymer in 3/32" (2.4mm) diameter.
SPECS: Steel, blue, polished finish. .620" (15mm) long. ORDERING: Select the sight height required using the Marbles and/or Williams charts and determine which Sight Style, Bead Type and Width is needed from the info above. Using the chart beside this copy, find the correct Marbles Sight and note the 9 digit Ordering No. For example: If you need a Contoured Ramp Front Sight, “MR” width, .290" (7.4mm) high, with a 1/16" (1.6mm) gold bead, follow the Height listing to the .290" figure, read across on the “MR” line to the 1/16" gold bead and note the number: 579-502-911. 1" = (2.54cm)
Mirino frontale di precisione per fucili
Il RIFLE BARREL MOUNTED 3/32" 41-W FRONT SIGHT è un mirino frontale di alta qualità, progettato per fucili con e senza basi ramp. La lama è elegantemente sagomata, inclinata verso la parte anteriore. Realizzato in acciaio e splendidamente blu per adattarsi a qualsiasi arma.
Caratteristiche del prodotto
- Mirino frontale montato sul barrel con lati della base arrotondati, ideale per armi con il taglio a dovetail direttamente nel barrel.
- Le mire “W” hanno una base larga 17/32" (13.5mm).
- Disponibile con tre perline: Pope’s Island Gold, perlina dorata a faccia piatta in 3/32" (2.4mm) di diametro, e perlina bianca in polimero a faccia piatta in 3/32" (2.4mm) di diametro.
Specifiche
Materiale: Acciaio, finitura blu, lucidata. Lunghezza: .620" (15mm).
Ordine
Seleziona l'altezza del mirino richiesta utilizzando i grafici Marbles e/o Williams e determina quale Sight Style, Bead Type e Width sono necessari dalle informazioni sopra. Utilizzando il grafico accanto a questo testo, trova il corretto Marbles Sight e annota il numero d'ordine a 9 cifre.
Ad esempio: se hai bisogno di un mirino frontale a contour ramp, larghezza “MR”, alto .290" (7.4mm), con una perlina dorata da 1/16" (1.6mm), segui l'elenco dell'altezza fino al valore di .290", leggi sulla linea “MR” fino alla perlina dorata da 1/16" e annota il numero: 579-502-911.
Nota: 1" = (2.54cm)