Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

JONES
SHOTGUN THROUGH-THE-PAD STOCK ADJUSTER

763000002
Fast, Hassle-Free Stock Adjustments To Match Any Shooting Style
Unique coupling system between the plates allows you to make adjustments without removing the recoil pad from the adjuster and provides more precise horizontal, vertical, and diagonal adjustability than the standard model. Simply drill two small 5/16" to 3/8" diameter holes in the pad, so you can insert the included Allen wrench to loosen the two hex-head screws and reposition the adjuster. Allows 1-7/16" vertical adjustment, 5/16" horizontal offset, and up to 40º left or right tilt.
SPECS: Machined 6061 aluminum, black, anodized finish. 5-11⁄16" (14.5cm) long, 2 (5cm) wide, 13⁄32" (10mm) thick. Fits recoil pads with 3-1⁄8" c-to-c hole spacing. Includes mounting hardware and Allen wrench.
144.9 144.9 1 CHF
Référence: 763000002
JONES THROUGH-THE-PAD STOCK ADJUSTER BLACK ALUMINUM
Ref Fabricant: TSA GTF Système de couplage unique entre les plaques vous permet d'effectuer des ajustements sans enlever la plaque de couche de l'ajusteur et assure le réglage en horizontal, vertical et diagonal plus précis que le modèle standard. Simplement percer deux 5/16 petit "à trous de diamètre 3/8 po dans le pavé, donc vous pouvez insérer la clé Allen fournie pour desserrer les deux vis à tête hexagonale et repositionner la vis de réglage. Permet 1-7/16" réglage vertical, 5/16" décalage horizontal et jusqu'à 40 ° à gauche ou à droite, incliner.
144.9 CHF 9 CHF 144.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir Finition: Noir Manufacture: Universel Carabine Matériaux: Aluminum

Caractéristiques

Couleur: Noir Finition: Noir Manufacture: Universel Carabine Matériaux: Aluminum Poids du colis: 0.136kg Hauteur d'expédition: 8mm Largeur d'expédition: 102mm Longueur d'expédition: 262mm

Détails de l'article

Fabriqué au USA



Fast, Hassle-Free Stock Adjustments To Match Any Shooting Style
Unique coupling system between the plates allows you to make adjustments without removing the recoil pad from the adjuster and provides more precise horizontal, vertical, and diagonal adjustability than the standard model. Simply drill two small 5/16" to 3/8" diameter holes in the pad, so you can insert the included Allen wrench to loosen the two hex-head screws and reposition the adjuster. Allows 1-7/16" vertical adjustment, 5/16" horizontal offset, and up to 40º left or right tilt.
SPECS: Machined 6061 aluminum, black, anodized finish. 5-11⁄16" (14.5cm) long, 2 (5cm) wide, 13⁄32" (10mm) thick. Fits recoil pads with 3-1⁄8" c-to-c hole spacing. Includes mounting hardware and Allen wrench.
Newsletter