Quickly attaches to factory drilled and tapped 10/22® receivers. Six, cross slots provide the versatility to mount full size scopes, plus red dot sights or compact scopes using Weaver-style rings. Silver anodized or hard coat, black finish matches factory receiver.
SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75" (12cm) long. Includes screws and Allen wrench.
Altro...
Monte versatile per ambiti compatti & viste
Rapidamente si attacca alla fabbrica perforato e colpito 10/22 ® ricevitori. Sei, Croce slot forniscono la versatilità per montare gli ambiti full-size, oltre a luoghi puntino rosso o compatto ambiti utilizzando anelli Weaver-stile. Argento anodizzato o rivestimento duro, finitura nera corrisponde a ricevitore di fabbrica.
Specifiche: Alluminio T6061, cappotto d'argento, anodizzato o duro, nero finitura. 4,75"(12cm) di lunghezza. Include viti e chiave a brugola.
Altro...
Punteggi dei clienti per POWER CUSTOM BLACK 10/22® RECEIVER MOUNT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4
Beats factory dovetail mount hands down.(11.12.2009)
This is a top notch, made in the U.S.A. no nonsense mount. The finish matches the reciever finish perfectly. If you are tired of your rings slipping forward on the factory dovetail style mount, this is the mount for you. It attaches to the reciever with allen screws. Keep in mind that it is about 3/8" taller than the factory mount, when selecting rings.
No screws, but otherwise an OK mount.(23.05.2015)
This mount is advertised as including the mounting screws. Mine arrived sealed in the package, but there were no screws. I don't fault Brownells because Power Custom's website also says the product includes screws. Appears someone neglected to put the screws in the package. I emailed Power Custom through their website and asked for the screws, but received no response other than a confirmation that they received my submission. Requires a longer 6-48 flat head screw than the typical scope mount screw. The mount appears to be fair quality. Matches the receiver color well. Made in China. I probably would not buy this one again.
N. prodotto: 713122100 POWER CUSTOM BLACK 10/22® RECEIVER MOUNT Parti Fabbricante: PCRBB Rapidamente si attacca alla fabbrica perforato e colpito 10/22 ® ricevitori. Sei, Croce slot forniscono la versatilità per montare gli ambiti full-size, oltre a luoghi puntino rosso o compatto ambiti utilizzando anelli Weaver-stile. Argento anodizzato o rivestimento duro, finitura nera corrisponde a ricevitore di fabbrica.
27.9CHF5CHF 27.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RugerColore: BlackMateriale: AlluminioModello: 10/22Numero di basi: 1 pezzoTipo: Basi stile Weaver
Adatto per:
Ruger
Colore:
Black
Materiale:
Alluminio
Modello:
10/22
Numero di basi:
1 pezzo
Tipo:
Basi stile Weaver
Peso della spedizione: 0.091kgAltezza di spedizione: 5mmLarghezza di spedizione: 84mmLunghezza di spedizione: 130mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 713122101 POWER CUSTOM SILVER 10/22® RECEIVER MOUNT Parti Fabbricante: PCRB Rapidamente si attacca alla fabbrica perforato e colpito 10/22 ® ricevitori. Sei, Croce slot forniscono la versatilità per montare gli ambiti full-size, oltre a luoghi puntino rosso o compatto ambiti utilizzando anelli Weaver-stile. Argento anodizzato o rivestimento duro, finitura nera corrisponde a ricevitore di fabbrica.
28.9CHF2CHF 28.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RugerColore: SilverMateriale: AlluminioModello: 10/22Numero di basi: 1 pezzoTipo: Basi stile Weaver
Quickly attaches to factory drilled and tapped 10/22® receivers. Six, cross slots provide the versatility to mount full size scopes, plus red dot sights or compact scopes using Weaver-style rings. Silver anodized or hard coat, black finish matches factory receiver.
SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75" (12cm) long. Includes screws and Allen wrench.
Altro...
Monte versatile per ambiti compatti & viste
Rapidamente si attacca alla fabbrica perforato e colpito 10/22 ® ricevitori. Sei, Croce slot forniscono la versatilità per montare gli ambiti full-size, oltre a luoghi puntino rosso o compatto ambiti utilizzando anelli Weaver-stile. Argento anodizzato o rivestimento duro, finitura nera corrisponde a ricevitore di fabbrica.
Specifiche: Alluminio T6061, cappotto d'argento, anodizzato o duro, nero finitura. 4,75"(12cm) di lunghezza. Include viti e chiave a brugola.
Altro...
Punteggi dei clienti per POWER CUSTOM BLACK 10/22® RECEIVER MOUNT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4
Beats factory dovetail mount hands down.(11.12.2009)
This is a top notch, made in the U.S.A. no nonsense mount. The finish matches the reciever finish perfectly. If you are tired of your rings slipping forward on the factory dovetail style mount, this is the mount for you. It attaches to the reciever with allen screws. Keep in mind that it is about 3/8" taller than the factory mount, when selecting rings.
No screws, but otherwise an OK mount.(23.05.2015)
This mount is advertised as including the mounting screws. Mine arrived sealed in the package, but there were no screws. I don't fault Brownells because Power Custom's website also says the product includes screws. Appears someone neglected to put the screws in the package. I emailed Power Custom through their website and asked for the screws, but received no response other than a confirmation that they received my submission. Requires a longer 6-48 flat head screw than the typical scope mount screw. The mount appears to be fair quality. Matches the receiver color well. Made in China. I probably would not buy this one again.