Reduced Power Tune-Up Pak fits 10/22® in all calibers. Includes an extra power hammer spring, reduced power trigger spring, and reduced power sear spring to improve let-off and reduce trigger pull, perfect for competition. Tune-Up Pak fits all calibers of 10/22®. Includes an extra power hammer spring, extra power trigger spring, and reduced power sear spring for a clean, crisp trigger pull, perfect for hunting. For an even smoother, lighter-feeling trigger pull, install the reduced power (RP) trigger/sear spring. Tune-Up Paks do not include recoil springs.
Plus...
Kits pour améliorer le fonctionnement
Pak de tune-up puissance réduite correspond à 10/22 ® dans tous les calibres. Comprend un ressort de marteau de puissance supplémentaire, réduit la puissance gâchette printemps et printemps infrarouge puissance réduite pour améliorer la décision no let-off et réduire sur la détente, idéal pour la compétition. Tune-up Pak s'adapte à tous les calibres de 10/22 ®. Comprend un ressort de marteau de puissance supplémentaire et ressort de gâchette extra puissant ressort saisir puissance réduite pour une propre et nette détente, idéale pour la chasse. Pour une détente encore plus fluide, plus léger-sentiment, installer le ressort de gâchette/sear puissance réduite (RP). Tune-up Paks n'incluent pas les ressorts de rappel.
Plus...
Évaluations client de WOLFF REDUCED POWER TUNE-UP PAK
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.3
This is what you want(10.12.2010)
I add this kit to a Power Custom ADJUSTABLE hammer, sear and trigger kit, then shim with LC Shively shims for the very best OEM 10/22 Trigger Group that I can build. trigger pull is usually 2.5 lbs or less with externally adjustable creep and over travel.
Makes a very crisp trigger.(24.09.2011)
I really like the trigger on my 10/22 now. breaks like glass and is kettle cooked chip crisp!
Wise Choice(07.05.2012)
Intalled and fired hundreds of rounds so far. The trigger pull (after a lot of polishing!) isn't even comparable to stock, and no light strikes.
Reduced Power spring kit by Wolff(14.04.2014)
The factory 10/22 trigger on newer rifles are horrible! Purchased this and installed the sear and trigger return springs. Didn't use the increased hammer spring as I've never had issues with light strikes.
Along with polishing the sear engagements with 4000 grit wet dry it breaks like glass. My trusty trigger pull gauge says 3.1 lbs. That's very acceptable for a plinking / hunting rifle.
For those who might be leary about doing this yourself go to YOUTUBE as there are plenty of videos on disassembly of the trigger group.
Reduced power spring kit(16.07.2015)
My stock trigger measure 6 lb 3 oz and after I installed the kit it went down exactly 1 lb. Its not worth the effort. I used a digital trigger gauge. I took the average of 5 pulls.
Comes w/3 springs, 1 is too long.(22.07.2011)
Comes w/xtra pwr. hammer spring,reduced pwr. sear spring, & xtra pwr. trigger spring, which @ full compression is about 1/12" too long. Though, if you slowly, painstakingly shorten the trigger de-tints nose (yeah, putting that assbly. back together 8-10 times really sucks), to use trigger spring, end result is a custom fit trigger stop (yeah!!) or, order the factory Ruger spring Brownells sells separately. For a full trigger job, decrease sear overlap,hone & polish before setting trigger stop. Don't forget a new factory recoil spring/rod assbly. too!
Easy to install(17.01.2012)
Went in easy with no custom fitting required. Only a slight pull increase so i didn't throw my accuracy at the range when shooting free-hand.
Référence: 969000204 WOLFF REDUCED POWER TUNE-UP PAK Ref Fabricant: 18076 Pak de tune-up puissance réduite correspond à 10/22 ® dans tous les calibres. Comprend un ressort de marteau de puissance supplémentaire, réduit la puissance gâchette printemps et printemps infrarouge puissance réduite pour améliorer la décision no let-off et réduire sur la détente, idéal pour la compétition. Tune-up Pak s'adapte à tous les calibres de 10/22 ®. Comprend un ressort de marteau de puissance supplémentaire et ressort de gâchette extra puissant ressort saisir puissance réduite pour une propre et nette détente, idéale pour la chasse. Pour une détente encore plus fluide, plus léger-sentiment, installer le ressort de gâchette/sear puissance réduite (RP). Tune-up Paks n'incluent pas les ressorts de rappel.
14.9CHF0CHF 14.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 969180750 WOLFF KIT 18075 TUNE-UP PAK Ref Fabricant: 18075 Pak de tune-up puissance réduite correspond à 10/22 ® dans tous les calibres. Comprend un ressort de marteau de puissance supplémentaire, réduit la puissance gâchette printemps et printemps infrarouge puissance réduite pour améliorer la décision no let-off et réduire sur la détente, idéal pour la compétition. Tune-up Pak s'adapte à tous les calibres de 10/22 ®. Comprend un ressort de marteau de puissance supplémentaire et ressort de gâchette extra puissant ressort saisir puissance réduite pour une propre et nette détente, idéale pour la chasse. Pour une détente encore plus fluide, plus léger-sentiment, installer le ressort de gâchette/sear puissance réduite (RP). Tune-up Paks n'incluent pas les ressorts de rappel.
14.9CHF0CHF 14.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Reduced Power Tune-Up Pak fits 10/22® in all calibers. Includes an extra power hammer spring, reduced power trigger spring, and reduced power sear spring to improve let-off and reduce trigger pull, perfect for competition. Tune-Up Pak fits all calibers of 10/22®. Includes an extra power hammer spring, extra power trigger spring, and reduced power sear spring for a clean, crisp trigger pull, perfect for hunting. For an even smoother, lighter-feeling trigger pull, install the reduced power (RP) trigger/sear spring. Tune-Up Paks do not include recoil springs.
Plus...
Kits pour améliorer le fonctionnement
Pak de tune-up puissance réduite correspond à 10/22 ® dans tous les calibres. Comprend un ressort de marteau de puissance supplémentaire, réduit la puissance gâchette printemps et printemps infrarouge puissance réduite pour améliorer la décision no let-off et réduire sur la détente, idéal pour la compétition. Tune-up Pak s'adapte à tous les calibres de 10/22 ®. Comprend un ressort de marteau de puissance supplémentaire et ressort de gâchette extra puissant ressort saisir puissance réduite pour une propre et nette détente, idéale pour la chasse. Pour une détente encore plus fluide, plus léger-sentiment, installer le ressort de gâchette/sear puissance réduite (RP). Tune-up Paks n'incluent pas les ressorts de rappel.
Plus...
Évaluations client de WOLFF REDUCED POWER TUNE-UP PAK
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.3
This is what you want(10.12.2010)
I add this kit to a Power Custom ADJUSTABLE hammer, sear and trigger kit, then shim with LC Shively shims for the very best OEM 10/22 Trigger Group that I can build. trigger pull is usually 2.5 lbs or less with externally adjustable creep and over travel.
Makes a very crisp trigger.(24.09.2011)
I really like the trigger on my 10/22 now. breaks like glass and is kettle cooked chip crisp!
Wise Choice(07.05.2012)
Intalled and fired hundreds of rounds so far. The trigger pull (after a lot of polishing!) isn't even comparable to stock, and no light strikes.
Reduced Power spring kit by Wolff(14.04.2014)
The factory 10/22 trigger on newer rifles are horrible! Purchased this and installed the sear and trigger return springs. Didn't use the increased hammer spring as I've never had issues with light strikes.
Along with polishing the sear engagements with 4000 grit wet dry it breaks like glass. My trusty trigger pull gauge says 3.1 lbs. That's very acceptable for a plinking / hunting rifle.
For those who might be leary about doing this yourself go to YOUTUBE as there are plenty of videos on disassembly of the trigger group.
Reduced power spring kit(16.07.2015)
My stock trigger measure 6 lb 3 oz and after I installed the kit it went down exactly 1 lb. Its not worth the effort. I used a digital trigger gauge. I took the average of 5 pulls.
Comes w/3 springs, 1 is too long.(22.07.2011)
Comes w/xtra pwr. hammer spring,reduced pwr. sear spring, & xtra pwr. trigger spring, which @ full compression is about 1/12" too long. Though, if you slowly, painstakingly shorten the trigger de-tints nose (yeah, putting that assbly. back together 8-10 times really sucks), to use trigger spring, end result is a custom fit trigger stop (yeah!!) or, order the factory Ruger spring Brownells sells separately. For a full trigger job, decrease sear overlap,hone & polish before setting trigger stop. Don't forget a new factory recoil spring/rod assbly. too!
Easy to install(17.01.2012)
Went in easy with no custom fitting required. Only a slight pull increase so i didn't throw my accuracy at the range when shooting free-hand.