Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
100015471
High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger® 10/22® which utilizes a bullpup design for superior balance and ergonomics. This incredibly durable, polymer stock will reduce the overall length of most 10/22®’s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22® bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistance to flex three times greater than aluminum by weight. A safety extension is included to allow the original factory safety to be activated, in addition to a safety selector located near the trigger. Also included is both an extended magazine and automatic bolt release which replace the factory releases and allow for much faster manipulation of your rifle's controls. This kit comes complete with a removable dummy suppressor, two side mounted Picatinny rails, and a detachable ammunition storage box for holding spare rounds in the field. Accepts factory 10 round magazines as well as most aftermarket high capacity magazines. Fits factory 18 1/2" and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Made in the USA. New models of the 90/22 can be used by left handed shooters, as the kit now includes a detachable shell deflector. PLEASE CHECK THAT YOUR RUGER 10/22 BARREL IS AT LEAST 18” IN LENGTH. MOST 10/22 barrels are long enough to produce a legal length rifle in the 90/22 stock system. However, some 10/22® variants and aftermarket barrels are shorter than 18". Federal law requires rifles to have a minimum overall length of 26”. The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length. You can check your barrel length by removing the barrel from the 10/22® receiver and measuring it from muzzle to breech.

SPECS: Fits - Ruger 10/22 rifles with a 18" barrel.  Construction - Fiber reinforced polymer.  6061 aluminum optics rail and bedding block.  Steel charging handle with melonite finish.  Steel trigger linkage with melonite finish.  Length - 21.5" long without 10/22 installed (not including dummy suppressor).  Overall length - 26.5" with factory 10/22 barrel.  Weight - 3.5 lbs.

459.9 459.9 1 CHF
Référence: 100015471
HIGH TOWER ARMORY RUGER 10/22 STOCK BULLPUP POLYMER BLK
Ref Fabricant: HTA9022BLK Haute tour Armory 90/22 est un kit stock compact et maniable pour le ® de la Ruger 10/22 ® qui utilise un design bullpup d'équilibre supérieur et d'ergonomie. Cette incroyablement durable, stock de polymère réduira la longueur totale de plus de 10/22 ® est d'environ 26 1/2 pouces, un peu plus de la longueur minimale requise par le gouvernement fédéral pour les fusils. L'HTA 90/22 dispose également d'un monolithique en aluminium usiné CNC Picatinny d'optique et d'aluminium, literie, bloc, ainsi que d'un ambidextre acier poignée qui l'usine 10/22 de cycles de charge ® boulon de positions avancées. Le lien de déclenchement HTA 90/22 est fait d'acier de Melonite traité pour le transfert plus cohérent et efficace de l'énergie, ayant une résistance à flex trois fois plus d'aluminium en poids. Une extension de sécurité est fournie pour permettre la sécurité usine original doivent être activées, en plus d'un sélecteur de sécurité situé près de la détente. Également inclus est un magazine prolongée et le dégagement de boulon automatique qui replacer les rejets de l'usine et la laisser pour une manipulation beaucoup plus rapide des contrôles de votre carabine. Ce kit est livré complet avec un suppresseur factice amovible, deux côté monté rails Picatinny et une boîte de stockage de munitions détachable pour la tenue de rechange complète dans le domaine. Accepte l'usine 10 autour de magazines ainsi que des revues de grande capacité plus pièces de rechange. S'adapte usine 18 1/2 po et. 920" bull barils au moins 18 pouces de longueur (17 1/4 pouces du visage de récepteur de museler). Made in USA. Nouveaux modèles de la 90/22 peuvent être utilisés par la gauche remis en tirant, comme le kit comprend maintenant un déflecteur de coquille détachable. VEUILLEZ VÉRIFIER QUE VOTRE RUGER 10/22 CANON EST AU MOINS DE 18" DE LONG. La plupart des fûts de 10/22 sont assez longtemps pour produire un fusil longueur légale dans le système de stock 90/22. Cependant, quelques 10/22 ® variantes et barils de pièces de rechange sont plus courtes que 18". La loi fédérale exige fusils d'avoir une longueur minimale de 26". L'HTA 90/22 nécessite une longueur de baril minimale de 18" à atteindre les 26" longueur hors tout. Vous pouvez vérifier votre longueur de baril en enlevant le baril le 22/10 ® récepteur et il mesure du museau à la culasse.
459.9 CHF 8 CHF 459.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir Manufacture: Ruger Matériaux: Polymer Modèle: 10/22 Style: Bullpup

Caractéristiques

Couleur: Noir Manufacture: Ruger Matériaux: Polymer Modèle: 10/22 Style: Bullpup Poids du colis: 1.837kg Hauteur d'expédition: 86mm Largeur d'expédition: 221mm Longueur d'expédition: 584mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.y.1



High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger® 10/22® which utilizes a bullpup design for superior balance and ergonomics. This incredibly durable, polymer stock will reduce the overall length of most 10/22®’s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22® bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistance to flex three times greater than aluminum by weight. A safety extension is included to allow the original factory safety to be activated, in addition to a safety selector located near the trigger. Also included is both an extended magazine and automatic bolt release which replace the factory releases and allow for much faster manipulation of your rifle's controls. This kit comes complete with a removable dummy suppressor, two side mounted Picatinny rails, and a detachable ammunition storage box for holding spare rounds in the field. Accepts factory 10 round magazines as well as most aftermarket high capacity magazines. Fits factory 18 1/2" and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Made in the USA. New models of the 90/22 can be used by left handed shooters, as the kit now includes a detachable shell deflector. PLEASE CHECK THAT YOUR RUGER 10/22 BARREL IS AT LEAST 18” IN LENGTH. MOST 10/22 barrels are long enough to produce a legal length rifle in the 90/22 stock system. However, some 10/22® variants and aftermarket barrels are shorter than 18". Federal law requires rifles to have a minimum overall length of 26”. The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length. You can check your barrel length by removing the barrel from the 10/22® receiver and measuring it from muzzle to breech.

SPECS: Fits - Ruger 10/22 rifles with a 18" barrel.  Construction - Fiber reinforced polymer.  6061 aluminum optics rail and bedding block.  Steel charging handle with melonite finish.  Steel trigger linkage with melonite finish.  Length - 21.5" long without 10/22 installed (not including dummy suppressor).  Overall length - 26.5" with factory 10/22 barrel.  Weight - 3.5 lbs.

Newsletter