Ihr Warenkorb ist leer.

Warenkorb

0917309915

Suisse / Schweiz

Sprachen: Deutsch Français Italiano

SATURN PRODUCTS
SCG AR-15/M16 ACCU-GRIP BARREL VISE JAWS

852015000

Fully-Lined Barrel Grooves Prevent Slipping And Damage

Massive aluminum jaws lined with space age polyurethane elastomer grip tight and prevent marring on AR-15/M16 barrels. Two grooves fit standard and heavy barrel contours.

SPECS: Machined aluminum with permanently bonded green polyurethane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 3-7/8" (9.8cm) long. 2 lb. 6 oz. (1kg) wt. Fits 4" and wider vises.

Mehr...

Voll ausgekleidete Laufnuten verhindern Ausrutschen und Beschädigungen

Massive Aluminiumbacken, die mit Polyurethan-Elastomer aus dem Weltraumzeitalter ausgekleidet sind, halten fest und verhindern Beschädigungen an AR-15 / M16-Läufen. Zwei Rillen passen für Standard- und schwere Laufkonturen.

TECHNISCHE DATEN: Bearbeitetes Aluminium mit dauerhaft gebundener grüner Polyurethan-Elastomerauskleidung. 5 "(12,7 cm) breit, 1" (2,5 cm) dick, 3 bis 7/8 "(9,8 cm) lang. 1 kg (2 lb. 6 oz.) Gewicht. Für 4" und breitere Schraubstöcke.

Mehr...

Kundenbewertungen zu SATURN PRODUCTS ACCU-GRIP VISE JAWS

Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4.2

If you're removing a barrel, buy it! (18.12.2009)

First off, I'm not quite sure why this is advertised for AR-15's only-- a barrel is a barrel, and this should work fine for about any gun. I've removed barrels using this product, as well as plain-jane wood blocks that are channeled out. The gripping surface on this tool is far superior to plain wood-- and grip is what it's all about when referencing blocks and vises. It's worth the extra cost.

Does not work with FN SCAR barrels (09.03.2010)

Description states that it works with 5.56 pencil barrels, but this is not accurate. Using the "pencil barrel" smaller diameter blocks, the aluminum blocks clamped shut in vise before rubber was touching the sides of the barrel. Barrel not only spun, but the was enough gap there to wobble the barrel.

Worked as advertised (18.05.2010)

Held the barrel, did not slip, did not mare the finish, very good tool. I bought this because I got a compensator for my M4, I removed the A2 flash hider with a strap wrench, but could not fully install the new compensator. Ordered this on a friday and got it on monday, pulled it out of the box, put the blocks in my vise, separated my upper and lower reciever, removed all the tactical toys off of the upper, set the barreled upper in the vise blocks, tightened the vise, put a wrench on my compensater and tightened it the rest of the way. Done! All in less time than it took me to type this and I was hobbleing around on crutches(softball injurie).

Good vise jaws (23.05.2010)

I use these to change M16 and M4 barrels, and they do a great job of not marring the barrel. The one change needed on this tool is a notch cut out for the bayonet lug, which prevents the barrel from spinning without having to tighten the vise with all of your might.

Barrel vice block (14.11.2011)

Works

So Easy A Caveman Can Use It (16.03.2012)

first off I am a Police armorer who works on various weapons platforms that my agency carries. I also have a gun business on the side that I do custom work. I purchased a set of the Accu-Grip vise jaws after having difficulty with the set that I had. WOW! what a difference these things were like a gift from heaven. They work well with H-Bars and Standard Barrel configs. I would highly recommend these to the professional or the novice building a black rifle. Well worth the money spent, you'll have less agravation in the long run.

Good barrel vise jaws (12.05.2012)

Quality contruction and they work.

Just works (24.01.2013)

I've had a set of these since the builder gave me a set in gunsmithing school. Haven't found much through the years that they won't hold.

works well. (28.03.2016)

It did not fit the barrels I was working on as received (too loose). I cut a strip of leather that would fit in one side and that tightened it right up, I then had no problem tightening up the compensator against the crush washer. This thing works well... but it wont fit every barrel profile right out of the box.

Lesen Sie 9 weitere Bewertungen bei brownells.com

229.9 229.9 1 CHF

Artikel-Nr.: 852015000
SATURN PRODUCTS ACCU-GRIP VISE JAWS
Herstellerproduktnummer: NONE Massive Aluminiumbacken, die mit Polyurethan-Elastomer aus dem Weltraumzeitalter ausgekleidet sind, halten fest und verhindern Beschädigungen an AR-15 / M16-Läufen. Zwei Rillen passen für Standard- und schwere Laufkonturen.

229.9 CHF 49 CHF 229.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Hersteller/Modell: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Hersteller/Modell: AR-15 Versandgewicht: 1.134kg Versandhöhe: 81mm Versandbreite: 112mm Versandlänge: 119mm

Artikeldetails

Made in USA

Fully-Lined Barrel Grooves Prevent Slipping And Damage

Massive aluminum jaws lined with space age polyurethane elastomer grip tight and prevent marring on AR-15/M16 barrels. Two grooves fit standard and heavy barrel contours.

SPECS: Machined aluminum with permanently bonded green polyurethane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 3-7/8" (9.8cm) long. 2 lb. 6 oz. (1kg) wt. Fits 4" and wider vises.

Mehr...

Voll ausgekleidete Laufnuten verhindern Ausrutschen und Beschädigungen

Mehr...

Kundenbewertungen zu SATURN PRODUCTS ACCU-GRIP VISE JAWS

Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4.2

If you're removing a barrel, buy it! (18.12.2009)

Does not work with FN SCAR barrels (09.03.2010)

Worked as advertised (18.05.2010)

Good vise jaws (23.05.2010)

Barrel vice block (14.11.2011)

Works

So Easy A Caveman Can Use It (16.03.2012)

Good barrel vise jaws (12.05.2012)

Quality contruction and they work.

Just works (24.01.2013)

I've had a set of these since the builder gave me a set in gunsmithing school. Haven't found much through the years that they won't hold.

works well. (28.03.2016)

Lesen Sie 9 weitere Bewertungen bei brownells.com

Kunden kauften auch

BROWNELLS AR-15/M16 CHAMBER BRUSH 8-36M THREADS
M16 & AR-15 CHAMBER BRUSHES

BROWNELLS

Auf Lager

CHF 16.90 * CHF 12.90 - CHF 16.90*

Patronenlagerbürsten

4.8

BROWNELLS 308AR NYLON HEAVY WEIGHT CHAMBER BRUSH 8-36 THREADS
AR-15/M16/ 308 AR NYLON CHAMBER BRUSH

BROWNELLS

Auf Lager

CHF 13.90 * CHF 13.90 - CHF 16.90*

Patronenlagerbürsten

CMMG AR-15 LOWER PIN & SPRING KIT
AR-15/M16 LOWER SPRING KIT

CMMG

Auf Lager

CHF 25.90 *

3.3

CMMG AR15/M16 UPPER PINS & SPRINGS KIT
AR-15/M16 UPPER SMALL PARTS KIT

CMMG

Auf Lager

CHF 26.90 *

Anmeldung

Kennwort vergessen?
Registrieren

SOCIAL MEDIA

Facebook

BROWNELLS.CH

PRODUKTKATEGORIEN

BESTELLEN

Kundenservice

Willkommen!

Willkommen bei brownells.ch, dem führenden Händler von Waffenteilen, Zubehör, Accessoires und Werkzeugen für Waffen in der Svizzera!

Unsere Serviceleistungen

Wenn Sie Schiessen und das Arbeiten mit Waffen mögen, ganz gleich ob als Hobby oder beruflich oder einfach nur ein Waffenbesitzer sind, bei uns sind Sie richtig!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Bastler, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertige Waffenteilen und dem Zubehör von Brownells Svizzera. Sie finden bei uns mehr als 50.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchensenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Aufrüstung Ihrer Waffen.