Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

SATURN PRODUCTS
SCG AR-15/M16 ACCU-GRIP BARREL VISE JAWS

852015000

Fully-Lined Barrel Grooves Prevent Slipping And Damage

Massive aluminum jaws lined with space age polyurethane elastomer grip tight and prevent marring on AR-15/M16 barrels. Two grooves fit standard and heavy barrel contours.

SPECS: Machined aluminum with permanently bonded green polyurethane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 3-7/8" (9.8cm) long. 2 lb. 6 oz. (1kg) wt. Fits 4" and wider vises.

Altro...

Canna completamente foderato scanalature antiscivolo e danneggiare

Ganasce in alluminio massiccio foderato con grip di elastomero poliuretanico età spazio stretto e prevenire guastare il AR-15/M16 barili. Due scanalature misura profili standard e pesante del barilotto.

Specifiche: alluminio lavorata con permanentemente legato verde elastomero poliuretano fodera. 5"(12.7 cm) largamente, 1" (2,5 cm) spessore, 3-7/8"(9.8 cm) lungh. 4 etti WT 6 once (1 kg) si inserisce 4" e più ampia vises.

Altro...

Punteggi dei clienti per SATURN PRODUCTS ACCU-GRIP VISE JAWS

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4.2

If you're removing a barrel, buy it! (18.12.2009)

First off, I'm not quite sure why this is advertised for AR-15's only-- a barrel is a barrel, and this should work fine for about any gun. I've removed barrels using this product, as well as plain-jane wood blocks that are channeled out. The gripping surface on this tool is far superior to plain wood-- and grip is what it's all about when referencing blocks and vises. It's worth the extra cost.

Does not work with FN SCAR barrels (09.03.2010)

Description states that it works with 5.56 pencil barrels, but this is not accurate. Using the "pencil barrel" smaller diameter blocks, the aluminum blocks clamped shut in vise before rubber was touching the sides of the barrel. Barrel not only spun, but the was enough gap there to wobble the barrel.

Worked as advertised (18.05.2010)

Held the barrel, did not slip, did not mare the finish, very good tool. I bought this because I got a compensator for my M4, I removed the A2 flash hider with a strap wrench, but could not fully install the new compensator. Ordered this on a friday and got it on monday, pulled it out of the box, put the blocks in my vise, separated my upper and lower reciever, removed all the tactical toys off of the upper, set the barreled upper in the vise blocks, tightened the vise, put a wrench on my compensater and tightened it the rest of the way. Done! All in less time than it took me to type this and I was hobbleing around on crutches(softball injurie).

Good vise jaws (23.05.2010)

I use these to change M16 and M4 barrels, and they do a great job of not marring the barrel. The one change needed on this tool is a notch cut out for the bayonet lug, which prevents the barrel from spinning without having to tighten the vise with all of your might.

Barrel vice block (14.11.2011)

Works

So Easy A Caveman Can Use It (16.03.2012)

first off I am a Police armorer who works on various weapons platforms that my agency carries. I also have a gun business on the side that I do custom work. I purchased a set of the Accu-Grip vise jaws after having difficulty with the set that I had. WOW! what a difference these things were like a gift from heaven. They work well with H-Bars and Standard Barrel configs. I would highly recommend these to the professional or the novice building a black rifle. Well worth the money spent, you'll have less agravation in the long run.

Good barrel vise jaws (12.05.2012)

Quality contruction and they work.

Just works (24.01.2013)

I've had a set of these since the builder gave me a set in gunsmithing school. Haven't found much through the years that they won't hold.

works well. (28.03.2016)

It did not fit the barrels I was working on as received (too loose). I cut a strip of leather that would fit in one side and that tightened it right up, I then had no problem tightening up the compensator against the crush washer. This thing works well... but it wont fit every barrel profile right out of the box.

Leggi più recensioni su brownells.com

229.9 229.9 1 CHF

N. prodotto: 852015000
SATURN PRODUCTS ACCU-GRIP VISE JAWS
Parti Fabbricante: NONE Ganasce in alluminio massiccio foderato con grip di elastomero poliuretanico età spazio stretto e prevenire guastare il AR-15/M16 barili. Due scanalature misura profili standard e pesante del barilotto.

229.9 CHF 49 CHF 229.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR-15

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: AR-15 Peso della spedizione: 1.134kg Altezza di spedizione: 81mm Larghezza di spedizione: 112mm Lunghezza di spedizione: 119mm

Dettagli dell'elemento

Made in Usa

Fully-Lined Barrel Grooves Prevent Slipping And Damage

Massive aluminum jaws lined with space age polyurethane elastomer grip tight and prevent marring on AR-15/M16 barrels. Two grooves fit standard and heavy barrel contours.

SPECS: Machined aluminum with permanently bonded green polyurethane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 3-7/8" (9.8cm) long. 2 lb. 6 oz. (1kg) wt. Fits 4" and wider vises.

Altro...

Canna completamente foderato scanalature antiscivolo e danneggiare

Altro...

Punteggi dei clienti per SATURN PRODUCTS ACCU-GRIP VISE JAWS

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4.2

If you're removing a barrel, buy it! (18.12.2009)

Does not work with FN SCAR barrels (09.03.2010)

Worked as advertised (18.05.2010)

Good vise jaws (23.05.2010)

Barrel vice block (14.11.2011)

Works

So Easy A Caveman Can Use It (16.03.2012)

Good barrel vise jaws (12.05.2012)

Quality contruction and they work.

Just works (24.01.2013)

I've had a set of these since the builder gave me a set in gunsmithing school. Haven't found much through the years that they won't hold.

works well. (28.03.2016)

Leggi più recensioni su brownells.com

Scelti da altri clientie

BROWNELLS AR-15/M16 CHAMBER BRUSH 8-36M THREADS
M16 & AR-15 CHAMBER BRUSHES

BROWNELLS

In magazzino

CHF 16.90 * CHF 12.90 - CHF 16.90*

Scovoli per camere

4.8

BROWNELLS 308AR NYLON HEAVY WEIGHT CHAMBER BRUSH 8-36 THREADS
AR-15/M16/ 308 AR NYLON CHAMBER BRUSH

BROWNELLS

In magazzino

CHF 13.90 * CHF 13.90 - CHF 16.90*

Scovoli per camere

CMMG AR-15 LOWER PIN & SPRING KIT
AR-15/M16 LOWER SPRING KIT

CMMG

In magazzino

CHF 25.90 *

3.3

CMMG AR15/M16 UPPER PINS & SPRINGS KIT
AR-15/M16 UPPER SMALL PARTS KIT

CMMG

In magazzino

CHF 26.90 *

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.