Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Rendi la rettifica delle viti facile con il Jig Checker/Shortener di BROWNELLS. 🔧 Prodotto in USA, finitura blued, per lavori speciali!
  • BROWNELLS SCREW CHECKER/SHORTENING JIG
  • BROWNELLS SCREW CHECKER/SHORTENING JIG

BROWNELLS SCREW CHECKER/SHORTENING JIG

050806015920 080574001

Top takeaways

  • Facile e veloce da usare
  • Acciaio indurito di alta qualità
  • Realizzato negli Stati Uniti

Caratteristiche

  • Peso della spedizione: 0.023kg
  • Larghezza di spedizione: 83mm
  • Lunghezza di spedizione: 146mm
  • UPC: 050806015920
24.9 24.9 1 CHF
24.9 CHF CHF 24.90

Prezzi comprensivi di IVA più spedizione

N. prodotto: 080574001

050806015920 Per quei lavori speciali, utilizza questo jig Checker/Shortener in acciaio temprato che rende la rettifica delle viti alla lunghezza giusta, veloce e facile.
In magazzino
1
2
3
4
5
6
7
8
9
10+

Descrizione:

Mostra originale (inglese)
Per quei lavori speciali, utilizza questo jig Checker/Shortener in acciaio temprato che rende la rettifica delle viti alla lunghezza giusta, veloce e facile.

SPECIFICHE: Prodotto negli Stati Uniti, finitura blued.

Top takeaways

  • Facile e veloce da usare
  • Acciaio indurito di alta qualità
  • Realizzato negli Stati Uniti

Caratteristiche

  • Peso della spedizione: 0.023kg
  • Larghezza di spedizione: 83mm
  • Lunghezza di spedizione: 146mm
  • UPC: 050806015920

Recensioni dei clienti

Valutazioni dei clienti (3)

3.7 / 5
Più o meno raccomandato

Brownells USA loose sloppy threads 24.11.2014

I bought this to cut down some 6-48 screws to fit in a Winchester 1300 shotgun receiver so they would stop just short of projecting into the receiver. I used brand new Brownells 6-48 Torx head screws.



The screws are a VERY loose fit in the threads - poor thread engagement - so despite the tool being at least 1/8" thick and there being several threads there, the screws are not held securely in the tool. The only way I could figure out to hold the screw steady while cutting it down was to "pinch" it from the head end of the screw and pull it back against the poorly-tapped threads to force a modicum of "thread engagement", keep the screw relatively square/plumb for the cut operation, and to keep some tension on the screw so it wouldn't wobble and spin around while I was cutting it with a dremel. Which means my thumb and forefinger got hot several times.



VERY dissatisfied with this product. I have already marked up the tool cutting the first screw with it, but I will be contacting Brownells about a refund. Of course, it will cost me about the same I paid for it to ship it back. Funny how that works... I "get" that Brownells has to make a profit to stay in business, but I expected the threads to be tapped a lot better for a tool specifially made to cut screws with. I also have no realistic expectation that these poorly tapped threads are going to do any significant amount of "chasing" the threads of the cut screw once I remove it from the tool.



Next time I will just make my own. I did a LOT better job of tapping the threads on my shotgun receiver and that was the first time I have EVER drilled and tapped threads on a gun part. There is almost zero screw wobble on my tapped threads.



Shame on you, Brownells.

Assolutamente raccomandato

Brownells USA What a GREAT idea !!! 06.06.2013

It is one of those things that I did not know existed. I now wonder how I ever got along without it. I salute you !!!

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio