Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter. FITS: Sig P210 Target (American Only Post 2016) EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Supporto per mirino red dot di alta qualità per la tua Sig P210 Target.
Il SIG SAUER P210A TARGET VORTEX VIPER/VENOM SIGHT MOUNT di EGW è progettato per offrire una soluzione robusta e affidabile per il montaggio di mirini red dot. Realizzato in alluminio 7075 con un rivestimento nero opaco hardcoat, questo supporto è sia leggero che resistente.
Dettagli del prodotto:
- Dimensioni: Lunghezza totale: 1.811", Larghezza totale: .99"
- Hardware di montaggio: (2) viti a testa a bottone 6-32, (2) viti a testa piatta 6-32, (1) vite di serraggio 6-32
- Compatibilità: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter
- Adatto per: Sig P210 Target (solo modelli americani post 2016)
I mirini red dot EGW sono progettati per essere installati da sinistra a destra (con la bocca rivolta in avanti). La scanalatura ha un taper progressivo per facilitare l'installazione. Basta rimuovere il mirino posteriore della tua arma e sostituirlo con il nostro supporto per montare il tuo Vortex Viper/Venom, Burris FastFire o mirino Docter. Non sono necessarie modifiche. Puoi rimuovere il nostro supporto e ripristinare il tuo mirino posteriore in qualsiasi momento. Hardware di montaggio incluso.
Istruzioni per l'installazione:
- Rimuovere il mirino posteriore
- Installare il supporto EGW nella scanalatura
- Serrare la vite di serraggio (se applicabile)
- Posizionare il mirino red dot sul supporto EGW (mettere un piccolo pezzo di carta tra il mirino red dot e il supporto faciliterà la rimozione e proteggerà il mirino dal Loctite)
- Applicare Loctite blu sulle viti di montaggio fornite
- Serrare le viti di montaggio a 15in/lbs
Viti incluse:
- 2 Viti a testa a bottone - Fornite per mirini Vortex Viper e Venom
- 2 Viti a testa piatta - Fornite per mirini Burris FastFire e Docter
Le viti incluse con questo supporto richiedono una chiave a brugola da 5/64'' per l'installazione.