Votre panier est vide.

Panier

MGW
SIGHT PRO SIGHT MOVER

584000005

Main Sight Tool - Now comes with the 30 degree pusher block for Glock and HK sights. A must have for Gunsmiths and Armorers. The Sight Pro uses a unique clamping shoe design, plus 4 slide support pads and a white nylon spacer block to lock the slide in place while adjusting or replacing sights. Two cuts on the lower section of the tool allow you to lock it in a bench vise. Redesigned to make it easier to swap out the pusher blocks. Shoes do not come with Sight Tool.

SPECS:

SP102 fits Glock except G42 and 43 SP103 fits Springfield XD-S only
SP104 fits S&W M&P Shield only
SP105 fits Colt 1911, Sig 1911, Bersa Thunder, Kimber Ultra Carry II, Springfield EMP 9mm, Para-Ordnance Carry 12
SP106 fits Sprigfield XD, XDM only
SP107 fits S&W 3rd Generation 9mm
SP108 fit FN 9mm/.40 cal(FNP, FNS, FNX) Forty-Niine
SP109 fits Sig Sauer (P220, P225, P226, P228, P229, P239)
SP110 fits Sig Pro Series
SP111 fits Beretta 92
SP112 fits Beretta Cougar/PX4
SP113 fits HK USP/P2000/P30/P45
SP114 fir S&W M&P only
SP115 fits Glock 42 only
SP116 fits Ruger SR Series
SP117 fits Bersa BP Series
SP118 fits Colt Mustang .380
SP119 fits Ruger LC Series
SP120 fits Ruger P Series
SP121 fits CZ-75
SP122 fits Sig Sauer P238
SP123 fits Sig Sauer P938
SP124 fits Browning Hi-Power, FEG Hi-Power, Tokarev
SP125 fits S&W .380 Bodyguards/Kahr P380
SP126 fits S&W Sigma
SP127 fits S&W 3rd Generation .45
SP128 fits Steyer M40/MPS/M9-A1
SP129 fits FN .45 Cal(FNP .45, FNS .45, FNX .45)
SP130 fits Kimber Solo Carry
SP131 fits Walther P99/PPQ
SP132 fits Kahr P40/CW40/PM9
SP133 fits Sig Sauer P320
SP134 fits Sig Sauer P224
SP135 fits Kahr P45
SP136 fits HK VP9
SP137 fits Sig P290 RS

Plus...

Principal outil de vue - est désormais livré avec le bloc pousseur de 30 degrés pour sites Glock et HK. Un must have pour les armuriers et armuriers. Le Pro de vue utilise une conception unique de chaussures serrage, plus les tampons support diapositive 4 et une cale d’espacement en nylon blanc pour bloquer la lame en place tandis que le réglage ou le remplacement des sites. Deux découpes sur la partie inférieure de l’outil permettent de bloquer dans un étau d’établi. Repensé pour rendre plus facile remplacer les blocs de poussoir. Chaussures ne viennent pas avec l’outil de la vue.

Spécifications :

SP102 s'adapte Glock sauf G42 et 43 103 correspond à Springfield XD-E seulement
SP104 s'adapte S & W M & P bouclier seulement
SP105 correspond à Sig 1911, Bersa Thunder, Kimber Ultra II portent, Springfield EMP ø9mm, Colt 1911, Para-Ordnance transporter 12
SP106 s'adapte Sprigfield XD, XDM seulement
SP107 pour S & W 3ème génération 9 mm
SP108 fit FN 9 mm/.40 cal (FNP PN, FNX) quarante-Niine
109 s'intègre le Sig Sauer (P220, P225, P226, P228, P229, P239)
SP110 ajustements Sig Pro Series
SP111 s'adapte Beretta 92
SP112 s'adapte Beretta Cougar/PX4
SP113 correspond à HK USP/P2000/P30/P45
sapin SP114 S & W M & P seulement
SP115 s'adapte Glock 42 seulement
SP116 s'adapte Ruger ® ® de la série SR
SP117 convient aux séries BP Bersa
SP118 correspond à Colt Mustang.380
SP119 s'adapte Ruger ® ® série LC
SP120 correspond à la série P de Ruger ® ™
SP121 s'adapte CZ-75
SP122 s'intègre le Sig Sauer P238
SP123 s'intègre le Sig Sauer P938
SP124 correspond à Browning Hi-Power, FEG Hi-Power, Tokarev
SP125 pour S & W.380 P380 de gardes du corps/Kahr
SP126 pour S & W Sigma
SP127 pour S & W 3ème génération.45
SP128 correspond à Steyer M40/MPS/M9-A1
SP129 s'adapte FN Cal.45 (FNP.45, PN.45, FNX.45)
SP130 correspond à Kimber Solo transporter
SP131 correspond à Walther P99/PPQ
SP132 s'adapte Kahr P40/CW40/PM9
DS133 s'intègre le Sig Sauer P320
SP134 s'intègre le Sig Sauer P224
SP135 s'adapte Kahr P45
SP136 correspond à HK VP9
SP137 correspond à Sig P290 RS

Plus...

Évaluations client de MGW MAIN SIGHT TOOL

Nombre d'évaluations: 35
De brownells.com: 35
Note moyenne: 4.9

Excellent Tool! (12.01.2014)

Gunsmiths are few and far between where I live and shipping a firearm is a pain. Purchased this tool primarily for Springfield Armory firearms...especially the XDs. Regarding the XDs: The front sight should be removed out of the left side of the slide (muzzle downrange), and the rear sight will come out the right side (again, muzzle downrange); visa versa for installation. Made short, easy work of replacing the factory sights on three XDs with aftermarket night sights. Only downside is that I have four other firearm-specific pushers that are now obsolete.

Fantastic Sight Tool (15.01.2014)

I have used MGW Sight pushers for a while and they were mostly adequate for the individual guns they were designed for, but this tool is the best sight pusher I've ever used. Beats the MGW individual tools and a certain $500+ Bench mounted mounted sight pusher hands down. If you change a lot of sights I strongly recommend this tool. Makes it a breeze to change sights even on the most stubborn of sights (i.e. Springfield XD).

Amazing!!!!! (05.04.2014)

This is an awesome tool. It makes removing the XD sights easy. Left no marks on the slide or the new sights. It's a must for anyone who has to install or remove sight very often. I have used it on Sig, Glock, Springfield XD and others with great results. Well worth the money.

Great sight tool!! (02.05.2014)

I bought this, the 30 degree block and a few of the bases to change sights out and I am extremely happily with it! It has saved me time and money since I no longer have to make a trip to a gunsmith to change out sights. I even use it at work. It is a quality tool and I highly recommend it.

As close to perfect as a pusher can get (17.06.2014)

I have moved/changed hundreds of sights using virtually every method and pusher imaginable including bench mounted units costing 2.5x the MGW Universal pusher. What a pleasure to use. Makes XD's and PX4's doable without worry of damage. The height adjustment feature is genius. If you regularly change sights and don't own this tool - Well, I'm sorry:-)

Best, most durable sight tool! (09.07.2014)

Having used many different brands of sight tools over the years, I knew that after trying out MGW's Main Sight Tool for the first time, I'd never need another.

If you've used earlier versions of MGW's sight tools, you'll find this one to be a quick study. Simple to use and exceptionally strong, it can easily handle even the most stubborn sights, ( XD, XDm, XDS ) without damaging anything on the pistol's slide.

It's especially perfect for gunsmiths. Our shop has been using it for a couple of months now and there hasn't been a job yet that it couldn't readily handle. A wide variety of slide shoes available at very low cost allows this tool to hold pretty much any contemporary semi-auto slide out there today.

The adjustment settings allow for a perfect and snug fit for each slide while it's held in place, without scratching or marking it. Removing, installing, adjusting.. this sight tool does it all and does it perfectly!

Awesome tool (09.09.2014)

I was using another sight tool to take off a XD-S front and rear sight and it cracked (broke). Not the sight the tool broke. âWowâ Yes the XDâs sights are very stubborn and hard to take off even if you use a brass punch and a hammer, you would probably damage the sight and or the slide or both. With this Universal Sight Pro Tool you would not have any problems, It would take it off like butter. And whats lovely about it is the tool may be a little in the high price range for some people but itâs well worth it. As a gunsmith Iâll make my money back in no time. Also donât need so many different sight tools for every firearms in the market just need to buy the boot for that firearm and its cheeper and less space on the wall or tool box.

Well engineered w/ room for improvement (24.09.2014)

Very well engineered!

A guy came in today to get sights replaced on his Ruger SR9C. (This shoe arrived just yesterday!)

First time out and I have a problem. The white plastic elevation adjustment block is too tall to allow me to get down to remove the factory sights. Had to machine about 1/8 inch off it to get at the sight base.

Also, the lock down knobs/nuts have no lead-in, so getting them started on the posts is subject to fumbling. I dropped mine twice! I machined a tapered lead and all's much better now. Unfortunately the threads are some odd extra-fine metric pitch, so cleaning up burrs & chips with a common tap is not possible. Minor thing. These knobs/nuts go on quick & easy upside down, though!

Very well engineered otherwise, though a bit difficult to get an eye on what one is doing. Way better than the cheap-o special I had before.

Superior engineering, very pleased! (13.10.2014)

The tool is built like a tank. If you use it as directed (watch the video on youtube) you will not damage your sights or the pistol on which you are installing or removing them. I too had the issue of the knob (which DOES protect your pistol's slide top) keeping the arms too high but 5 minutes of sanding (remove the white knob and the two washers that serve as a bearing surface for the thumb screw) the BASE of the knob and everything works exactly like it should on the Valor slide with low novak sight cuts. Do not mill or sand the bearing surface (that which rests on your slide) of the knob! The base can be reduced and no one is the wiser once you've reinstalled it! George was very patient and instructive and I appreciate his customer service skills. I am glad I didn't try a lesser model/make of sight tool. Pay once, cry once! You will not be sorry.

Irreplaceable Tool (14.01.2015)

Hands down the finest universal sight tool. Much more expensive than the other options, but if you are changing sights often you will get over that instantly. They say "pay me now or pay me later." Don't waste your money on the others. Buy just one. And this is the one. No marring, easily adjustable and professional results.

Seriously solidly engineered (11.02.2015)

I had to wait a while to get the tool and all the required extra parts but it was worthwhile. It is very solidly made and provides a secure base for working on slides. I had to get the additional 30 degree pusher and the HK slide clamp since my first change was to put Dead Ringer Snake Eyes sights on an HK VP9. All this came to about $450. And there is additional expense for other pistols - extra cost and possible out-of-stock downsides. The original sights came off slick as can be and installing the front sight was easy. I ran into a problem installing the rear sight though. The pusher engaged the sight ring which is offset from the dovetail by about 0.3 inches. It looked like the resulting torque was going to either break the sight or mess up the installation. There was not enough flexibility with the tool to directly engage the slim dovetail. So I had to finish with a drift punch using the bottom part of the tool to hold the slide. It turned out fine and my old eyes really like the ring sight better. If I had to do this a lot, I would drill a hole in the bottom of the pusher to install a pin to engage the dovetail directly. Bottom line, this is an expensive tool but works well and my son will appreciate it when he gets it.

<img width="500" src='/userdocs/reviewimages/8b698aa1-8fa4-4724-adb4-5e1c0d5ef9eb.jpg' alt=''>

This Is It! (18.11.2015)

Ok, Ive tried them all. They all have some pro's and a lot of cons. But this tool is just to easy to use. The fit and finish is of a high end professional tool. It's the engineering that makes this tool very easy to setup and use. Don't waste any money on anything else. If you plan to put on or adjust more than one sight, bite the bullet and get this tool. Ive tried, Glock's, 1911's, Springfields XD and Sig's. All were super easy to do, and a pain of a job is now just fun.

Right tool for the job (09.12.2015)

I've used this tool to change the sights on Glocks, 1911's, XDS, and SW Shields. This pusher is simple to use and does not leave any mars on the slide. I once tried to get away with a brass drift and a hammer to remove the front sight on my Shield. It wasn't pretty. Invest in this tool and you won't be disappointed.

Excellent tool! (27.04.2016)

After talking with MGW, I ordered this model because it is the only one that would work for front and rear sights on my 5" M&P Pro.

The tool is much heavier and larger than I ever would have expected. Its a beast! Simple to use and worked like a charm.

I am pretty sure that the unit I received had been previously used, as it had grease smeared across it in several locations, and the slide support pads had been installed even though the instructions state that they would come disassembled. Not the end of the world as the item still worked as intended, but I wonder if someone used it and returned it to save the 300.

Love It! (06.09.2016)

Love this thing! When you pick it up, it is apparent how well built it is. Buy once, cry once!

The perfect sight pusher (27.09.2016)

This thing is great. It was a breeze changing the sights on my Glock 43 using this tool. I can't recommend it enough. The tool looks complicated at first, but once you watch the YouTube videos posted by the manufacturer, it becomes very easy to understand. Works with just about any semi auto ever made. The main tool may be a little pricey, but when compared with what you would pay for one-off sight pushers that only work with one make of gun (that you might never use again), this tool is a no-brainer, because with this you are buying one tool that can work with all your guns.

Excellent tool (12.11.2016)

The tool worked like a charm with my first job on a SIG P320. Itâs extremely well designed and engineered to help prevent all the common problems often encountered with changing sights. Because itâs a large and robust universal tool, itâs somewhat cumbersome to operate by holding it in hand, but it can be clamped into a vise if desired. I was concerned that all the screws and knobs would make it fiddly to set up and use, but after watching MGWâs video and a little practice, things went smoothly. My only complaint was that finding the proper video was a little tricky and MGWâs home is evidently only through a social media site which is a nuisance for people not interested in becoming members there (and thatâs a lot of us). Brownells should either host the video or at least provide a link.

GREAT tool! (09.12.2016)

This is a great tool to have in the box. Instructions are clear. Tool is easy to use, and performed the job perfectly!

Great Tool (16.12.2016)

Great tool for replacing sights on many pistols. I bought this tool and have had no problems with it. It does everything that they advertise.

Making me a better shot (22.12.2016)

About a month ago, I decided I wanted to upgrade my front sights on both of my M&Ps and also adjust all four of my pistols for exact centering. I figured this would entail a lot of trips to my lgs, so I opted for this wonderful device. When you pay for quality, you know the difference the first time you use it. I had to watch the video to fully understand the operation. But I've used it now 4 times and it is one of the most rock-solid tools I own. Someone at that company has a lot of engineering smarts!

Great sight tool (24.12.2016)

Simple to use, a bit of an investment but worth it to be able to take care of my sights without relying on someone else. So far I've used it on a P320, shield and G17 and it worked perfectly for each one.

Great product (02.01.2017)

This is one of the most well made tools I have ever purchased. Excellent design. Easy to learn to use. VERY VERSATILE. The pistol specific shoes are about $18. I am not a professional gunsmith but this can certainly allow you to install sights professionally.

excellent product! (07.01.2017)

bought this to install sights on my Sig 226 and it worked flawlessly! I have since used this on a glock with equally good results. Great instructions, Great product!

Best Universal Sight tool on the market (09.01.2017)

This sight press does a great job at moving or removing sights and installing them. An adapter or a shoe as it is called is needed for the specific gun that is being worked to hold it securely in place. Once the top slide is locked in you can easily remove the sights. I must admit the Sig sights are held in tight but the Sight pro did remove them with some effort. Overall I am happy with the purchase, I also bought almost all the shoes and wished that they sold a complete set at a discount should the buyer wished to do so. I bought a Universal carry case from another website to hold the press and a small tack bx for the shoes. Thanks MGW for the quality tool !!

<img width="500" src='/userdocs/reviewimages/2f4b7031-45e1-4221-977e-4318d8866687.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/4a22d747-7faa-4788-8ec5-d9c9c19283ff.jpg' alt=''>

Now this is a TOOL! (13.01.2017)

This sight installation and removal tool is a BEAST. Very robust and well made. It is expensive but IMO, worth every penny. Wish I had started out with this tool and saved myself a bunch of headaches!

This is the one to rule them all (23.01.2017)

I love this thing finally a pusher that can handle the hard stuff like Kahr & XD. The one thing I wish it had was a single blade adapter to push on the mos sight bases. Outside of that it is worth every penny especially when you work on as many different types of pistols as I do. In the long run this is actually the cheapest way to go if you need to work on several brands of firearms. This thing has never even bogged down like others. Even if I have to use a cheater bar (which is rarely) this has never scratched a frame. WHAT A TIME SAVER, THANKS BROWNELLS!

Did not work with some sights (03.03.2017)

Bought several inserts so as to be able to deal with multiple pistols. Was impossible to remove sight on XDs - had to take to a shop. Need to move rear sight on Colt 9mm 1911 Commander and the tool just could not budge the sight - yes, set-screw was removed from the sight and lots of oil used. The 1911 insert (105) needs to be about 1 mm taller so that pusher can get better purchase on the sight. The tool is built-like-a-tank. However, after applying max torque by hand I did not wish to add length to pusher's rod for fear that threads would be damaged.

I do not understand why I am 2 for 2 failures with this expensive, apparently well designed, tool.

This is the best! (04.05.2017)

Very easy to figure out how to use this. It comes with a detailed CD that explains all you need to know. It really is built like a tank. I have tried less expensive ones and I'm glad I found this jewel! If you want a sight tool, get this one. You really do get what you pay for.

Best tool I have ever bought (24.05.2017)

This thing is worth every bit I paid! It's heavy duty and grabs the slide tighter than any sight pusher I have ever used !!!

WORTH THE MONEY (10.06.2017)

As a shooter and hobbyist gunsmith, machinist and metal fabricator, I'm very impressed with the quality and versatility of this tool.

If you anticipate only ever changing sights on one gun and don't want to spend the money, you might rather buy the MGW model-specific tool but if you have several different guns to work on, and can afford to buy the Sight Pro, the purchase will be money well spent.

Great Sturdy Precision Tool! (04.09.2017)

Got this tool after trying to beat the stock sights out of my M&P Shield with a punch and hammer. They would not budge (at all). This press made quick work of them. I still tapped on the rear sight occasionally while using the press. I would stop and slightly tap it with a brass tap. It would knock it forward when it was tapped. Don't know if this was exactly necessary but it was stuck on there and it seemed to help it out. Make sure for the Shield that you remove the sight toward the ejection port side of the slide and install from that same side. That is at least the word I heard from the research I did. Also, clamp the press in a vise for easier cranking. I plan on using this on all my semi auto handguns. FN, Glock, S&W...

This thing is heavy duty and precision made. Compared to the Glock rear sight tool, well there is no comparison, but Glock sights come right out though so it doesn't need to be beefy... This definitely seems like a tool that will out last the user.

Watch the MGW video on YouTube to get a quick overview on how to use it.

BTW, I don't usually write reviews, but this is a really great product and I felt compelled by how well it worked.

A Must Have!! (21.11.2017)

I purchased this sight-push over a year ago along with a lot of the needed shoes, I would recommend this as a must have for a gunsmith shop! I have found this tool to be quite useful and works exceptionally well with all of the different sights I have had to swap out for customers. Very little to no marring on the sights when finished.

Questionable user? (04.04.2018)

After receiving and assembling, reading the instructions completely, I attempted to remove the rear sight from my Colt Government model 1091. It did not move at all, in either direction. I would have needed to use a cheater bar on the T handle to continue, and the instructions are specific not to ever use, instead use a hammer and punch. The tool is very well made and instructions are accurate for assembly and operations, but I cannot speak as to whether or not the tool actually works.

Most versitile sight mover (14.08.2018)

This tool, with the appropriate attachments, make removing and installing sights on a pistol about as easy as the job can be. The build quality is top notch, and should last a few lifetimes with proper care.

Versatile, easy to use (21.09.2018)

Just received the product and I am quite impressed with the build quality. Everything is nicely machined and finished. Screws and threads are heavy duty and smooth. Product comes with additional accessories - a separate sight pusher for sights that have 30 degree slanted sides that can be easily swapped out; it also comes with plastic spacers designed to go between the slide clamps and your slide to prevent damage to your slide. The rig is also designed to be used with a bench vise, but a vise is not necessary to use the product.

Product is easy to use and comes with concise instructions; there is also an excellent YouTube video that clearly explains use of the product.

The up front cost may not be worth it if you only need it for one brand of handgun, but if you need to change out or adjust sights for multiple brands, this product is a far better value than purchasing separate sight tools for each brand. MGW sells brand specific slide shoes that fit into this tool; they cost about $20 each.

Overall very impressed with the product. The night I received it, I had a front sight on my Beretta PX4 adjusted in a matter of minutes. Highly recommend to anyone who needs a single tool for multiple handgun brands.

Lire 35 plus d'avis sur brownells.com

459.9 459.9 1 CHF

Référence: 584000005
MGW MAIN SIGHT TOOL
Ref Fabricant: MGWSP1000 Principal outil de vue - est désormais livré avec le bloc pousseur de 30 degrés pour sites Glock et HK. Un must have pour les armuriers et armuriers. Le Pro de vue utilise une conception unique de chaussures serrage, plus les tampons support diapositive 4 et une cale d’espacement en nylon blanc pour bloquer la lame en place tandis que le réglage ou le remplacement des sites. Deux découpes sur la partie inférieure de l’outil permettent de bloquer dans un étau d’établi. Repensé pour rendre plus facile remplacer les blocs de poussoir. Chaussures ne viennent pas avec l’outil de la vue.

459.9 CHF 15 CHF 459.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Poids du colis: 2.427kg Hauteur d'expédition: 102mm Largeur d'expédition: 162mm Longueur d'expédition: 224mm

Détails de l'article

Fabriqué au USA

SPECS:

SP102 fits Glock except G42 and 43 SP103 fits Springfield XD-S only
SP104 fits S&W M&P Shield only
SP105 fits Colt 1911, Sig 1911, Bersa Thunder, Kimber Ultra Carry II, Springfield EMP 9mm, Para-Ordnance Carry 12
SP106 fits Sprigfield XD, XDM only
SP107 fits S&W 3rd Generation 9mm
SP108 fit FN 9mm/.40 cal(FNP, FNS, FNX) Forty-Niine
SP109 fits Sig Sauer (P220, P225, P226, P228, P229, P239)
SP110 fits Sig Pro Series
SP111 fits Beretta 92
SP112 fits Beretta Cougar/PX4
SP113 fits HK USP/P2000/P30/P45
SP114 fir S&W M&P only
SP115 fits Glock 42 only
SP116 fits Ruger SR Series
SP117 fits Bersa BP Series
SP118 fits Colt Mustang .380
SP119 fits Ruger LC Series
SP120 fits Ruger P Series
SP121 fits CZ-75
SP122 fits Sig Sauer P238
SP123 fits Sig Sauer P938
SP124 fits Browning Hi-Power, FEG Hi-Power, Tokarev
SP125 fits S&W .380 Bodyguards/Kahr P380
SP126 fits S&W Sigma
SP127 fits S&W 3rd Generation .45
SP128 fits Steyer M40/MPS/M9-A1
SP129 fits FN .45 Cal(FNP .45, FNS .45, FNX .45)
SP130 fits Kimber Solo Carry
SP131 fits Walther P99/PPQ
SP132 fits Kahr P40/CW40/PM9
SP133 fits Sig Sauer P320
SP134 fits Sig Sauer P224
SP135 fits Kahr P45
SP136 fits HK VP9
SP137 fits Sig P290 RS

Plus...

Spécifications :

SP102 s'adapte Glock sauf G42 et 43 103 correspond à Springfield XD-E seulement
SP104 s'adapte S & W M & P bouclier seulement
SP105 correspond à Sig 1911, Bersa Thunder, Kimber Ultra II portent, Springfield EMP ø9mm, Colt 1911, Para-Ordnance transporter 12
SP106 s'adapte Sprigfield XD, XDM seulement
SP107 pour S & W 3ème génération 9 mm
SP108 fit FN 9 mm/.40 cal (FNP PN, FNX) quarante-Niine
109 s'intègre le Sig Sauer (P220, P225, P226, P228, P229, P239)
SP110 ajustements Sig Pro Series
SP111 s'adapte Beretta 92
SP112 s'adapte Beretta Cougar/PX4
SP113 correspond à HK USP/P2000/P30/P45
sapin SP114 S & W M & P seulement
SP115 s'adapte Glock 42 seulement
SP116 s'adapte Ruger ® ® de la série SR
SP117 convient aux séries BP Bersa
SP118 correspond à Colt Mustang.380
SP119 s'adapte Ruger ® ® série LC
SP120 correspond à la série P de Ruger ® ™
SP121 s'adapte CZ-75
SP122 s'intègre le Sig Sauer P238
SP123 s'intègre le Sig Sauer P938
SP124 correspond à Browning Hi-Power, FEG Hi-Power, Tokarev
SP125 pour S & W.380 P380 de gardes du corps/Kahr
SP126 pour S & W Sigma
SP127 pour S & W 3ème génération.45
SP128 correspond à Steyer M40/MPS/M9-A1
SP129 s'adapte FN Cal.45 (FNP.45, PN.45, FNX.45)
SP130 correspond à Kimber Solo transporter
SP131 correspond à Walther P99/PPQ
SP132 s'adapte Kahr P40/CW40/PM9
DS133 s'intègre le Sig Sauer P320
SP134 s'intègre le Sig Sauer P224
SP135 s'adapte Kahr P45
SP136 correspond à HK VP9
SP137 correspond à Sig P290 RS

Plus...

Évaluations client de MGW MAIN SIGHT TOOL

Nombre d'évaluations: 35
De brownells.com: 35
Note moyenne: 4.9

Excellent Tool! (12.01.2014)

Fantastic Sight Tool (15.01.2014)

Amazing!!!!! (05.04.2014)

Great sight tool!! (02.05.2014)

As close to perfect as a pusher can get (17.06.2014)

Best, most durable sight tool! (09.07.2014)

Awesome tool (09.09.2014)

Well engineered w/ room for improvement (24.09.2014)

Superior engineering, very pleased! (13.10.2014)

Irreplaceable Tool (14.01.2015)

Seriously solidly engineered (11.02.2015)

This Is It! (18.11.2015)

Right tool for the job (09.12.2015)

Excellent tool! (27.04.2016)

Love It! (06.09.2016)

Love this thing! When you pick it up, it is apparent how well built it is. Buy once, cry once!

The perfect sight pusher (27.09.2016)

Excellent tool (12.11.2016)

GREAT tool! (09.12.2016)

This is a great tool to have in the box. Instructions are clear. Tool is easy to use, and performed the job perfectly!

Great Tool (16.12.2016)

Great tool for replacing sights on many pistols. I bought this tool and have had no problems with it. It does everything that they advertise.

Making me a better shot (22.12.2016)

Great sight tool (24.12.2016)

Great product (02.01.2017)

excellent product! (07.01.2017)

bought this to install sights on my Sig 226 and it worked flawlessly! I have since used this on a glock with equally good results. Great instructions, Great product!

Best Universal Sight tool on the market (09.01.2017)

Now this is a TOOL! (13.01.2017)

This is the one to rule them all (23.01.2017)

Did not work with some sights (03.03.2017)

This is the best! (04.05.2017)

Best tool I have ever bought (24.05.2017)

This thing is worth every bit I paid! It's heavy duty and grabs the slide tighter than any sight pusher I have ever used !!!

WORTH THE MONEY (10.06.2017)

Great Sturdy Precision Tool! (04.09.2017)

A Must Have!! (21.11.2017)

Questionable user? (04.04.2018)

Most versitile sight mover (14.08.2018)

Versatile, easy to use (21.09.2018)

Lire 35 plus d'avis sur brownells.com

Poursuivre vos achats

J P ENTERPRISES DIRECT THREAD MODULAR RAIL PICATINNY ALUMINUM BLACK 4"
AR-15 PICATINNY DIRECT THREAD MODULAR RAIL ALUMINUM

J P ENTERPRISES

En stock

CHF 89.90 * CHF 64.90 - CHF 89.90*

4.7

TIMNEY AR-15 SMALL PIN TRIGGER MODULE, 3 LBS, SOLID SHOE
AR-15 DROP-IN TRIGGER MODULE SOLID SHOE

TIMNEY

En stock

CHF 394.90 *

Détentes

4.4

Sale

SIGHT PRO & RANGEMASTER SIGHT MOVER SLIDE SHOES - MGW GLOCK SLIDE SHOE (EXCEPT GLOCK 42)

MGW GLOCK SLIDE SHOE (EXCEPT GLOCK 42)
SIGHT PRO & RANGEMASTER SIGHT MOVER SLIDE SHOES

MGW

En stock

CHF 23.59 * CHF 23.59 - CHF 33.90*

(Sélectionnez les articles en vente!)

Ancien prix CHF 27.90

Outils Déplacement Visée

HOGUE HEX GRIP SCREWS, BLUE, FITS SIG P226,P228,P229
SEMI AUTO GRIP SCREWS

HOGUE

Récommandé

CHF 28.90 * CHF 19.90 - CHF 29.90*

Vis Poignée

J P ENTERPRISES RAIL OFFSET ADAPTER 45 DEGREE 1.25"
AR-15/M16 45 DEGREE OFFSET ADAPTER

J P ENTERPRISES

En stock

CHF 99.90 *

Embases Carabine

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.