Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
749002109
The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning,cleaning case necks or case mouth deburring. The Caseholders and Driver are machined from stainless steel, and the driver has a one fourth hex shaft for use in power screwdrivers or low-speed drill motors. The driver is universal to the Sinclair system and will work with all the Caseholders. Our universal Caseholder enables you to use this system for any cartridge case which has a Lee Auto Prime sheelholder available for it. The Universal Caseholder works with the same #05-2500 drivers as our original caseholders, and it is available as a kit with the Driver and Universal caseholder or individually for those who already have a driver. Remember to order a Lee Auto Prime shellholder for your Universal Caseholder if you don't already have one. The Sinclair Driver and Caseholder system and a Sinclair Neck Turning Tool takes the hard work out of neck turning using either the Sinclair Power center or a power screwdriver. Holding the neck tuner in one hand and power screwdriver in the other negates the wobble in drive assembly of the screwdriver. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations.
15.9 15.9 1 CHF
Référence: 749002109
SINCLAIR INTERNATIONAL CASEHOLDER DRIVER
Ref Fabricant: 05200 Le système Sinclair Driver et Caseholder est conçu pour tenir et tourner votre cas pendant que vous êtes rotation du cou, nettoyage des cous de l'affaire ou l'ébavurage des cas bouche. Le Caseholders et le pilote sont usinées à partir d'acier inoxydable, et le pilote a un arbre hexagonal quart pour tournevis électrique ou basse vitesse perceuse moteurs. Le pilote est universel au système Sinclair et travaillera de concert avec tous les Caseholders. Notre Caseholder universel vous permet d'utiliser ce système pour n'importe quel douille qui a un sheelholder Lee Auto Prime disponible pour lui. La Caseholder universelle fonctionne avec les mêmes #05-2500 pilotes comme notre caseholders original, et il est disponible en kit avec le caseholder pilote et universel, soit individuellement pour ceux qui ont déjà un pilote. N'oubliez pas de commander un support de douille Lee Auto Prime pour votre Caseholder universelle si vous n'avez pas déjà un. Le système Sinclair Driver et Caseholder et un outil de tournage de cou Sinclair sort le dur labeur de tournage de cou utilisant le Sinclair Power center ou un tournevis électrique. Tenant le tuner du cou dans un tournevis manuels et électriques dans l'autre nie l'oscillation dans le train de roulement du tournevis. Ce système est un moyen grand et peu coûteux pour accélérer le cou en tournant le processus. Aussi fonctionne très bien pour de nombreux autres cas de préparation des opérations.
15.9 CHF 17 CHF 15.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.032kg Largeur d'expédition: 83mm Longueur d'expédition: 146mm

Détails de l'article

Fabriqué au USA



The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning,cleaning case necks or case mouth deburring. The Caseholders and Driver are machined from stainless steel, and the driver has a one fourth hex shaft for use in power screwdrivers or low-speed drill motors. The driver is universal to the Sinclair system and will work with all the Caseholders. Our universal Caseholder enables you to use this system for any cartridge case which has a Lee Auto Prime sheelholder available for it. The Universal Caseholder works with the same #05-2500 drivers as our original caseholders, and it is available as a kit with the Driver and Universal caseholder or individually for those who already have a driver. Remember to order a Lee Auto Prime shellholder for your Universal Caseholder if you don't already have one. The Sinclair Driver and Caseholder system and a Sinclair Neck Turning Tool takes the hard work out of neck turning using either the Sinclair Power center or a power screwdriver. Holding the neck tuner in one hand and power screwdriver in the other negates the wobble in drive assembly of the screwdriver. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations.
Newsletter