The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
Altro...
Il Sinclair in legno ricarico stampa cavalletto è progettato per contenere il 7/8 di pollice a quattordici presse ricarica per uso campo/gamma o per uso domestico quando montaggio permanente non è un'opzione. Grande per load testing in gamma. Lo stand è costruito con compensato di betulla solida e rinforzato con angoli in alluminio per supporto strutturale. La grande impronta fornisce una base stabile quando fissata con un morsetto. Supporti di stampa sono spediti completamente assemblato. Progettato per ospitare le seguenti presse: Rockchucker RCBS, Redding Boss e Big Boss, Hornady 007 presse e presse di dimensioni simili. Utente deve segnare e praticare i fori di montaggio nella piastra superiore con trapano normale. Bulloni di montaggio non sono inclusi come non sappiamo quali dimensioni foro è necessario per la stampa. La piastra di montaggio ha una superficie di montaggio forabili di quattro e una metà pollice largo da cinque e una metà pollice profondo.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4
Maximize bench space(27.07.2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02.05.2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.
N. prodotto: 749006972 SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND Il Sinclair in legno ricarico stampa cavalletto è progettato per contenere il 7/8 di pollice a quattordici presse ricarica per uso campo/gamma o per uso domestico quando montaggio permanente non è un'opzione. Grande per load testing in gamma. Lo stand è costruito con compensato di betulla solida e rinforzato con angoli in alluminio per supporto strutturale. La grande impronta fornisce una base stabile quando fissata con un morsetto. Supporti di stampa sono spediti completamente assemblato. Progettato per ospitare le seguenti presse: Rockchucker RCBS, Redding Boss e Big Boss, Hornady 007 presse e presse di dimensioni simili. Utente deve segnare e praticare i fori di montaggio nella piastra superiore con trapano normale. Bulloni di montaggio non sono inclusi come non sappiamo quali dimensioni foro è necessario per la stampa. La piastra di montaggio ha una superficie di montaggio forabili di quattro e una metà pollice largo da cinque e una metà pollice profondo.
174.9CHF0CHF 174.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
Altro...
Il Sinclair in legno ricarico stampa cavalletto è progettato per contenere il 7/8 di pollice a quattordici presse ricarica per uso campo/gamma o per uso domestico quando montaggio permanente non è un'opzione. Grande per load testing in gamma. Lo stand è costruito con compensato di betulla solida e rinforzato con angoli in alluminio per supporto strutturale. La grande impronta fornisce una base stabile quando fissata con un morsetto. Supporti di stampa sono spediti completamente assemblato. Progettato per ospitare le seguenti presse: Rockchucker RCBS, Redding Boss e Big Boss, Hornady 007 presse e presse di dimensioni simili. Utente deve segnare e praticare i fori di montaggio nella piastra superiore con trapano normale. Bulloni di montaggio non sono inclusi come non sappiamo quali dimensioni foro è necessario per la stampa. La piastra di montaggio ha una superficie di montaggio forabili di quattro e una metà pollice largo da cinque e una metà pollice profondo.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4
Maximize bench space(27.07.2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02.05.2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.