Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

FORWARD CONTROLS DESIGN
SLING ADAPTER END PLATE, HVY, 1 SOCKET DLC BLACK

686162347957 430103565
ESF-H1 (End plate, Sling Adapter, Forward Controls Design, Heavy, 1 socket) is a drop in end plate replacement for the AR platform (both 223 and 308 spec). ESF-H1 is available in 4140 steel, DLC or phosphate coated versions. ESF has rotation limited side facing sockets. The rear facing socket has no limiters, as the receiver extension effectively limits the swivel’s rotation. End plates that incorporate side facing QD swivel sockets can mask available wrench notches required for torquing. A conventional castle nut wrench has 3 lugs, in some cases, the socket housing may partially block access to one of them. A 2 lug castle nut wrench, such as the AR Multitasker, or our JCW (Joint Castle nut Wrench) would be required to torque the castle nut properly. ESF's receiver extension indexing tab can be tight on some receiver extensions. ESF-H1 (rear socket only) does not have rotation limiters, as the QD sling swivel is prevented from rotating 360 degrees by the receiver extension.  
69.9 79.9 2 CHF
Référence: 430103565
FORWARD CONTROLS DESIGN SLING ADAPTER END PLATE, HVY, 1 SOCKET DLC BLK
Ref Fabricant: ESFH1, DLC BLK 686162347957
79.9 CHF 0 CHF 79.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir

Caractéristiques

Couleur: Noir Poids du colis: 0.522kg Hauteur d'expédition: 20mm Largeur d'expédition: 83mm Longueur d'expédition: 140mm

Détails de l'article

Fabriqué au USA



Référence: 430103566
FORWARD CONTROLS DESIGN SLING ADAPTER END PLATE, HVY, 1 SOCKET PHOS BLK
Ref Fabricant: ESFH1, PHOS BL 686162347964
69.9 CHF 0 CHF 69.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir
ESF-H1 (End plate, Sling Adapter, Forward Controls Design, Heavy, 1 socket) is a drop in end plate replacement for the AR platform (both 223 and 308 spec). ESF-H1 is available in 4140 steel, DLC or phosphate coated versions. ESF has rotation limited side facing sockets. The rear facing socket has no limiters, as the receiver extension effectively limits the swivel’s rotation. End plates that incorporate side facing QD swivel sockets can mask available wrench notches required for torquing. A conventional castle nut wrench has 3 lugs, in some cases, the socket housing may partially block access to one of them. A 2 lug castle nut wrench, such as the AR Multitasker, or our JCW (Joint Castle nut Wrench) would be required to torque the castle nut properly. ESF's receiver extension indexing tab can be tight on some receiver extensions. ESF-H1 (rear socket only) does not have rotation limiters, as the QD sling swivel is prevented from rotating 360 degrees by the receiver extension.  
Newsletter