Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

FORWARD CONTROLS DESIGN
SLING ADAPTER END PLATE, HVY, 1 SOCKET DLC BLACK

686162347964 430103566
ESF-H1 (End plate, Sling Adapter, Forward Controls Design, Heavy, 1 socket) is a drop in end plate replacement for the AR platform (both 223 and 308 spec). ESF-H1 is available in 4140 steel, DLC or phosphate coated versions. ESF has rotation limited side facing sockets. The rear facing socket has no limiters, as the receiver extension effectively limits the swivel’s rotation. End plates that incorporate side facing QD swivel sockets can mask available wrench notches required for torquing. A conventional castle nut wrench has 3 lugs, in some cases, the socket housing may partially block access to one of them. A 2 lug castle nut wrench, such as the AR Multitasker, or our JCW (Joint Castle nut Wrench) would be required to torque the castle nut properly. ESF's receiver extension indexing tab can be tight on some receiver extensions. ESF-H1 (rear socket only) does not have rotation limiters, as the QD sling swivel is prevented from rotating 360 degrees by the receiver extension.  
69.9 79.9 2 CHF
N. prodotto: 430103566
FORWARD CONTROLS DESIGN SLING ADAPTER END PLATE, HVY, 1 SOCKET PHOS BLK
Parti Fabbricante: ESFH1, PHOS BL 686162347964
69.9 CHF 0 CHF 69.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Colore: Black

Caratteristiche

Colore: Black Peso della spedizione: 0.522kg Altezza di spedizione: 20mm Larghezza di spedizione: 83mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa



N. prodotto: 430103565
FORWARD CONTROLS DESIGN SLING ADAPTER END PLATE, HVY, 1 SOCKET DLC BLK
Parti Fabbricante: ESFH1, DLC BLK 686162347957
79.9 CHF 0 CHF 79.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Colore: Black
ESF-H1 (End plate, Sling Adapter, Forward Controls Design, Heavy, 1 socket) is a drop in end plate replacement for the AR platform (both 223 and 308 spec). ESF-H1 is available in 4140 steel, DLC or phosphate coated versions. ESF has rotation limited side facing sockets. The rear facing socket has no limiters, as the receiver extension effectively limits the swivel’s rotation. End plates that incorporate side facing QD swivel sockets can mask available wrench notches required for torquing. A conventional castle nut wrench has 3 lugs, in some cases, the socket housing may partially block access to one of them. A 2 lug castle nut wrench, such as the AR Multitasker, or our JCW (Joint Castle nut Wrench) would be required to torque the castle nut properly. ESF's receiver extension indexing tab can be tight on some receiver extensions. ESF-H1 (rear socket only) does not have rotation limiters, as the QD sling swivel is prevented from rotating 360 degrees by the receiver extension.  
Newsletter