The right hardware and tools to properly rebuild and repair Smith & Wesson rear sights with ease and accuracy. The kit features the necessary windage nuts, windage screws, rear sight plunger, rear sight plunger spring, rear sight elevation stud, and rear sight spring clip. The kit also includes special tools to correctly install these parts. The S&W Sight Nut Spanner is a unique, MAGNA-TIP® bit that fits the windage nut securing the rear sight leaf. The S&W Sight Staking Punch eliminates the chance the rear sight will come off when adjusting the windage on Smith & Wesson revolvers; Sight Staking Punch also available separately.
Tutto il necessario per ricostruire S & W posteriore attrazioni
Il giusto hardware e strumenti per ricostruire e riparare Smith Wesson & correttamente posteriore punti panoramici con facilità e precisione. Caratteristiche kit i dadi di derivazione necessarie, della derivazione viti, stantuffo della tacca di mira, mira posteriore pistone molla, perno di elevazione di tacca di mira e clip a molla vista posteriore. Il kit include anche strumenti speciali per installare correttamente queste parti. il S & W vista dado chiave è un po' di MAGNA-TIP ® unico, che si inserisce la vite di derivazione che la foglia di mira posteriore. S & W vista Staking punzone elimina la possibilità che la tacca di mira verrà via durante la regolazione della derivazione su revolver Smith Wesson &; Vista Staking Punch disponibili anche separatamente.
Specifiche: Punch - S2 strumento in acciaio, finitura ossido nero. 4"(10.2 cm) lunga, 3/8" (9.5 mm) di diametro. Il kit include: (6) posteriore vista della derivazione dadi, viti (6) di derivazione vista posteriore, stantuffi di vista posteriore (6), posteriore (6) vista stantuffo molle, (6) posteriore vista elevazione borchie, (6) clip di primavera vista posteriore, (2) bit S & W vista dado chiave, (1) S & W vista Staking Punch.
Altro...
Punteggi dei clienti per BROWNELLS S&W DELUXE REAR SIGHT REBUILD KIT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3.5
Punch is not worth it...get the Starrett(26.10.2012)
The kit is great for rebuilding rear sights as they break from use and carry.
All the included parts: nuts, screws, detents and springs are great.
The spanner wrench is good, but a bit on the soft side. It isn't meant for high torque anyways.
The punch is something to be desired. The tip it too big to properly flare the end of the screw. I ended up buying a Starrett punch set which includes the center punch. It made a perfect flare. Brownells needs to grind the included punch down to the proper size. it is the size of a Philliips screwdriver, way too big.
First try; works perfectly.(24.06.2017)
Got this to replace a stock black .146 blade with a white outline blade for a 617 10 shot; after blade was installed with a new windage screw and nut also purchased from Brownells I used this punch to stake the screw. Two firm, solid taps and the screw was staked perfectly. Hint: get the spanner bits also sold here. It comes with the instructions: FOLLOW them and it works.
N. prodotto: 078000040 BROWNELLS S&W DELUXE REAR SIGHT REBUILD KIT Il giusto hardware e strumenti per ricostruire e riparare Smith Wesson & correttamente posteriore punti panoramici con facilità e precisione. Caratteristiche kit i dadi di derivazione necessarie, della derivazione viti, stantuffo della tacca di mira, mira posteriore pistone molla, perno di elevazione di tacca di mira e clip a molla vista posteriore. Il kit include anche strumenti speciali per installare correttamente queste parti. il S & W vista dado chiave è un po' di MAGNA-TIP ® unico, che si inserisce la vite di derivazione che la foglia di mira posteriore. S & W vista Staking punzone elimina la possibilità che la tacca di mira verrà via durante la regolazione della derivazione su revolver Smith Wesson &; Vista Staking Punch disponibili anche separatamente.
154.9CHF0CHF 154.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonModello: Universal Handguns
Adatto per:
Smith & Wesson
Modello:
Universal Handguns
Peso della spedizione: 0.159kgAltezza di spedizione: 38mmLarghezza di spedizione: 114mmLunghezza di spedizione: 213mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 080000090 BROWNELLS S&W DELUXE REAR SIGHT STAKING PUNCH ONLY Il giusto hardware e strumenti per ricostruire e riparare Smith Wesson & correttamente posteriore punti panoramici con facilità e precisione. Caratteristiche kit i dadi di derivazione necessarie, della derivazione viti, stantuffo della tacca di mira, mira posteriore pistone molla, perno di elevazione di tacca di mira e clip a molla vista posteriore. Il kit include anche strumenti speciali per installare correttamente queste parti. il S & W vista dado chiave è un po' di MAGNA-TIP ® unico, che si inserisce la vite di derivazione che la foglia di mira posteriore. S & W vista Staking punzone elimina la possibilità che la tacca di mira verrà via durante la regolazione della derivazione su revolver Smith Wesson &; Vista Staking Punch disponibili anche separatamente.
39.9CHF24CHF 39.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonModello: Universal Handguns
The right hardware and tools to properly rebuild and repair Smith & Wesson rear sights with ease and accuracy. The kit features the necessary windage nuts, windage screws, rear sight plunger, rear sight plunger spring, rear sight elevation stud, and rear sight spring clip. The kit also includes special tools to correctly install these parts. The S&W Sight Nut Spanner is a unique, MAGNA-TIP® bit that fits the windage nut securing the rear sight leaf. The S&W Sight Staking Punch eliminates the chance the rear sight will come off when adjusting the windage on Smith & Wesson revolvers; Sight Staking Punch also available separately.
Tutto il necessario per ricostruire S & W posteriore attrazioni
Il giusto hardware e strumenti per ricostruire e riparare Smith Wesson & correttamente posteriore punti panoramici con facilità e precisione. Caratteristiche kit i dadi di derivazione necessarie, della derivazione viti, stantuffo della tacca di mira, mira posteriore pistone molla, perno di elevazione di tacca di mira e clip a molla vista posteriore. Il kit include anche strumenti speciali per installare correttamente queste parti. il S & W vista dado chiave è un po' di MAGNA-TIP ® unico, che si inserisce la vite di derivazione che la foglia di mira posteriore. S & W vista Staking punzone elimina la possibilità che la tacca di mira verrà via durante la regolazione della derivazione su revolver Smith Wesson &; Vista Staking Punch disponibili anche separatamente.
Specifiche: Punch - S2 strumento in acciaio, finitura ossido nero. 4"(10.2 cm) lunga, 3/8" (9.5 mm) di diametro. Il kit include: (6) posteriore vista della derivazione dadi, viti (6) di derivazione vista posteriore, stantuffi di vista posteriore (6), posteriore (6) vista stantuffo molle, (6) posteriore vista elevazione borchie, (6) clip di primavera vista posteriore, (2) bit S & W vista dado chiave, (1) S & W vista Staking Punch.
Altro...
Punteggi dei clienti per BROWNELLS S&W DELUXE REAR SIGHT REBUILD KIT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3.5
Punch is not worth it...get the Starrett(26.10.2012)
The kit is great for rebuilding rear sights as they break from use and carry.
All the included parts: nuts, screws, detents and springs are great.
The spanner wrench is good, but a bit on the soft side. It isn't meant for high torque anyways.
The punch is something to be desired. The tip it too big to properly flare the end of the screw. I ended up buying a Starrett punch set which includes the center punch. It made a perfect flare. Brownells needs to grind the included punch down to the proper size. it is the size of a Philliips screwdriver, way too big.
First try; works perfectly.(24.06.2017)
Got this to replace a stock black .146 blade with a white outline blade for a 617 10 shot; after blade was installed with a new windage screw and nut also purchased from Brownells I used this punch to stake the screw. Two firm, solid taps and the screw was staked perfectly. Hint: get the spanner bits also sold here. It comes with the instructions: FOLLOW them and it works.