Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

SMART LOCK TECHNOLOGY
SPRINGFIELD XD MAGLOC EASYFIT MAGWELL

625214016205 100006212

For Quick, No-Miss Reloads Under Pressure

Bolt-on magwell funnels magazine directly into the pistol for quick reloads without fumbling or distraction. Lightweight molded polymer won’t mar, scrape, or dent, plus it protects the magwell opening from damage. Just insert into the bottom of the grip and tighten the included steel retention screw for a snug, form-fitting, grip. Separate models available for 9mm/.40 S&W.

SPECS: Molded glass-fill nylon polymer, matte black. 23⁄8" (5.8cm) long. 9mm/.40 S&W - 1.47" (37.5mm) wide. Does not fit compact or sub-compact. May require minor trimming to fit 9mm/.40 S&W models made after March 2005.

Altro...

Per rapido, No-Miss ricarica sotto pressione

Imbullonato magwell imbuti rivista direttamente nella pistola per ricariche veloci senza armeggiare o distrazione. Polimero stampato leggero non mar, ruspe, o ammaccatura, più si protegge il magwell apertura da danni. Basta inserire nella parte inferiore dell'impugnatura e serrare la vite di ritegno in acciaio incluso per una presa comoda, forma-montaggio. Modelli separati per 9mm /. 40 S & W e,45 ACP XDs.

Specifiche: polimero di nylon vetro stampato-riempimento, nero opaco. 23 ⁄ 8"(5.8 cm) lungo. 9mm /. 40 S & W - 1,47"(37,5 mm) larghezza. ,45 ACP - 1,53"(39mm) larghezza. wt.34 oz (9.6 g) si inserisce full-size Springfield XD e vecchi HS2000 con botti 4" e 5". Non in forma compatta o sub-compact. Può richiedere il taglio minore per adattare i modelli di 9mm /. 40 S & W fatti dopo il marzo 2005.

Altro...

Punteggi dei clienti per SMART LOCK TECHNOLOGY XD EASYFIT MAG WELL, 9MM/.40 S&W

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 2.9

Too bad it's made out of Nylon (20.04.2011)

Mine broke after 2 or 3 matches because of a bobbled magazine change. Make no mistake, this is made of hard nylon/plastic/polymer/whatever and it can break as mine did. No warranty is mentioned at all...so buyer beware.

It was very easy to install and it did work well with the factory magazines (including the opening at the front for easy mag removal). Just a shame that it is not made of something metal-based. I only bought it because it was the only thing available in Canada.

Easy install and good value. (10.11.2011)

I bought this from the maker in CA before I saw it at Brownells and installed this on my XD Tactical 5" 45 ACP Pistol in less than 5 minutes. It really helps guide fresh mags into the gun and fits the gun and mags well. I am not into Race Gun shooting but I believe this will continue to work well on my primary carry/duty gun.

Not so sure about this product (19.03.2012)

I installed one of these on a duty weapon for a friend of mine. It felt flimsy and shortly broke. I can't recommend this product.

EASY FIT MAG WELL FOR XD (28.04.2014)

I use this on my xd service 45acp works great fits great with no modifcation drop in two screws and your done.

poor fit (09.10.2012)

installed on my xd tac 9mm the tab on it didnt fit at all ended up removing it and using the screw drectly into my grip very flexable and thin felling. way better off getting a metal mag well.

serves its purpose, hole in grip (14.07.2017)

I bought this for my XD 40. It fits the hole at the bottom of the grip but does not take in the whole insert and it creates a gap I have to use a small mallet to push it. The stopper screw at the back of the magwell makes a hole in my grip. I have to put glue to hold the sides of the magwell because it creates a gap on the side. I have to put glue to in between the bottom part of the grip and the magwell to hold it in place because the screw was not able to hold the grip in place it slowly slips. I have to make some resizing of the insert of the magwell so that it will fit the bottom of the grip but despite all these it serves it purpose.

<img width="500" src='/userdocs/reviewimages/449c72f9-e295-43ab-a967-3293195e0a66.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/6894b6be-46d7-47f6-bc90-b93c4d6f95e6.jpg' alt=''>

Not what expected about installation (20.02.2018)

Does not fit as expected. Had to trim a lot and still does not fit well. There is a gap at the bottom. The holding screw only makes a hole on the frame. Bit disappointed indeed.

Leggi più recensioni su brownells.com

35.9 35.9 1 CHF

N. prodotto: 100006212
SMART LOCK TECHNOLOGY XD EASYFIT MAG WELL, 9MM/.40 S&W
Parti Fabbricante: NONE 625214016205 Imbullonato magwell imbuti rivista direttamente nella pistola per ricariche veloci senza armeggiare o distrazione. Polimero stampato leggero non mar, ruspe, o ammaccatura, più si protegge il magwell apertura da danni. Basta inserire nella parte inferiore dell'impugnatura e serrare la vite di ritegno in acciaio incluso per una presa comoda, forma-montaggio. Modelli separati per 9mm /. 40 S & W e,45 ACP XDs.

35.9 CHF 17 CHF 35.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Springfield Finitura: Nero Modello: XD

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Springfield Finitura: Nero Modello: XD Peso della spedizione: 0.014kg Altezza di spedizione: 10mm Larghezza di spedizione: 102mm Lunghezza di spedizione: 163mm

Dettagli dell'elemento

Classificazione per l'export dagli US: 0A501.y.1

For Quick, No-Miss Reloads Under Pressure

Altro...

Per rapido, No-Miss ricarica sotto pressione

Altro...

Punteggi dei clienti per SMART LOCK TECHNOLOGY XD EASYFIT MAG WELL, 9MM/.40 S&W

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 2.9

Too bad it's made out of Nylon (20.04.2011)

Easy install and good value. (10.11.2011)

Not so sure about this product (19.03.2012)

I installed one of these on a duty weapon for a friend of mine. It felt flimsy and shortly broke. I can't recommend this product.

EASY FIT MAG WELL FOR XD (28.04.2014)

I use this on my xd service 45acp works great fits great with no modifcation drop in two screws and your done.

poor fit (09.10.2012)

installed on my xd tac 9mm the tab on it didnt fit at all ended up removing it and using the screw drectly into my grip very flexable and thin felling. way better off getting a metal mag well.

serves its purpose, hole in grip (14.07.2017)

Not what expected about installation (20.02.2018)

Does not fit as expected. Had to trim a lot and still does not fit well. There is a gap at the bottom. The holding screw only makes a hole on the frame. Bit disappointed indeed.

Leggi più recensioni su brownells.com

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.