Il magwell SPRINGFIELD XD MAGLOC EasyFit consente ricariche rapide e senza errori, proteggendo il magwell e garantendo una vestibilità sicura e confortevole.
625214016205 Il magwell a innesto diretto canalizza il caricatore direttamente nella pistola per ricariche rapide senza distrazioni o errori. Il polimero leggero modellato non graffia, non segna e non ammacca, e protegge l'apertura del magwell dai danni. Basta inserirlo nella parte inferiore dell'impugnatura e stringere la vite di ritenzione in acciaio inclusa per una presa salda e aderente. Modelli separati disponibili per 9mm/.40 S&W.
In magazzino
Più di 10 pz. nel magazzino USA
Spedizione gratuita a partire da CHF 399.00.
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Bolt-on magwell funnels magazine directly into the pistol for quick reloads without fumbling or distraction. Lightweight molded polymer won’t mar, scrape, or dent, plus it protects the magwell opening from damage. Just insert into the bottom of the grip and tighten the included steel retention screw for a snug, form-fitting, grip. Separate models available for 9mm/.40 S&W.
SPECS: Molded glass-fill nylon polymer, matte black. 23⁄8" (5.8cm) long. 9mm/.40 S&W - 1.47" (37.5mm) wide. Does not fit compact or sub-compact. May require minor trimming to fit 9mm/.40 S&W models made after March 2005.
Ricariche rapide e senza errori sotto pressione
Il SPRINGFIELD XD MAGLOC EASYFIT MAGWELL, progettato da SMART LOCK TECHNOLOGY, è la soluzione ideale per chi cerca un sistema di ricarica efficiente. Questo magwell da avvitare canalizza il caricatore direttamente nella pistola per ricariche rapide, senza impacci o distrazioni.
Descrizione del prodotto
Realizzato in polimero nylon rinforzato con vetro, questo magwell è leggero e non danneggia, graffia o ammacca la tua pistola. Inoltre, protegge l'apertura del magwell da eventuali danni. È sufficiente inserirlo nella parte inferiore dell'impugnatura e stringere la vite di ritenzione in acciaio inclusa per una presa aderente e perfettamente adattata.
Specifiche
Materiale: Polimero nylon rinforzato con vetro, finitura nera opaca
Dimensioni: 23⁄8" (5.8cm) di lunghezza
Compatibilità: 9mm/.40 S&W - 1.47" (37.5mm) di larghezza
Nota: Non compatibile con modelli compatti o sub-compatti
Potrebbe richiedere un lieve ritaglio per adattarsi ai modelli 9mm/.40 S&W prodotti dopo marzo 2005
Caratteristiche
Finitura:Nero
Modello:XD
Tipo di arma:Springfield
Peso della spedizione:0.014kg
Altezza di spedizione:10mm
Larghezza di spedizione:102mm
Lunghezza di spedizione:163mm
UPC:625214016205
Dettagli dell'elemento
Classificazione per l'export dagli US: 0A501.y.1
Recensioni dei clienti
Valutazioni dei clienti (7)
2.9 / 5
Raccomandato con riserve
Not what expected about installation 20.02.2018
Does not fit as expected. Had to trim a lot and still does not fit well. There is a gap at the bottom. The holding screw only makes a hole on the frame. Bit disappointed indeed.
Raccomandato con riserve
serves its purpose, hole in grip 14.07.2017
I bought this for my XD 40. It fits the hole at the bottom of the grip but does not take in the whole insert and it creates a gap I have to use a small mallet to push it. The stopper screw at the back of the magwell makes a hole in my grip. I have to put glue to hold the sides of the magwell because it creates a gap on the side. I have to put glue to in between the bottom part of the grip and the magwell to hold it in place because the screw was not able to hold the grip in place it slowly slips. I have to make some resizing of the insert of the magwell so that it will fit the bottom of the grip but despite all these it serves it purpose.
Raccomandato con riserve
EASY FIT MAG WELL FOR XD 28.04.2014
I use this on my xd service 45acp works great fits great with no modifcation drop in two screws and your done.
Raccomandato con riserve
poor fit 09.10.2012
installed on my xd tac 9mm the tab on it didnt fit at all ended up removing it and using the screw drectly into my grip very flexable and thin felling. way better off getting a metal mag well.
Non raccomandato
Not so sure about this product 19.03.2012
I installed one of these on a duty weapon for a friend of mine. It felt flimsy and shortly broke. I can't recommend this product.
Assolutamente raccomandato
Easy install and good value. 10.11.2011
I bought this from the maker in CA before I saw it at Brownells and installed this on my XD Tactical 5" 45 ACP Pistol in less than 5 minutes. It really helps guide fresh mags into the gun and fits the gun and mags well. I am not into Race Gun shooting but I believe this will continue to work well on my primary carry/duty gun.
Più o meno raccomandato
Too bad it's made out of Nylon 20.04.2011
Mine broke after 2 or 3 matches because of a bobbled magazine change. Make no mistake, this is made of hard nylon/plastic/polymer/whatever and it can break as mine did. No warranty is mentioned at all...so buyer beware.
It was very easy to install and it did work well with the factory magazines (including the opening at the front for easy mag removal). Just a shame that it is not made of something metal-based. I only bought it because it was the only thing available in Canada.
Ultimi visualizzati
Ops! Qualcosa è andato storto.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.