The Rapid Attach Buttstock Adapter Mini allows you to greatly reduce the length of your firearm for compact storage and easy transportation without any modifications. It allows for the attachment and removal of your buttstock or pistol brace in seconds. How to use: To detach, pull the bottom release tab and twist counter-clockwise 30 degrees. The stock will then be separated from the firearm. To re-attach, align the two pieces, push in and turn clockwise 30 degrees. The steel locking mechanism automatically secures the adapter. It's7075 aluminum construction and steel internals make the RAB-AD Mini both robust and lightweight. The RAB-AD Mini's designed for firearms utilizing AR style buffer tube stocks that do not require retention of a buffer weight and spring. The RAB-AD Pic Rail is designed for firearms utilizingMIL-STD-1913 (Picatinny rail) railed receivers. RAB-AD Mini Features: Designed, machined, and assembled in the U.S.A 7075 aluminum body Hard coat anodized for maximum wear protection 3 steel ball detents and locking bolt for a secure lock up RAB-AD weighs 2ounces Adds 1.25 inches to length of pull NOTE: The RAB-AD Mini is compatible with RAB-AD Pic Rail to adapt buffer tube style stock to railed receiver. It is not compatible with standard AR15 rifles as it cannot retain the buffer weight and spring. *Armorers tools provided. Only 3/8 ratchet wrench required* RAB-AD Pic Rail Features: Designed, machined, and assembled in the U.S.A 7075 aluminum body Hard coat anodized for maximum wear protection 3 steel ball detents and locking bolt for a secure lock up RAB-AD weighs 3.7 ounces Adds 1.46 inches to length of pull NOTE: Compatible with RAB-AD MINI to adapt railed receiver to buffer tube style stock *Hex keys provided. RAB-AD MINI (MALE ASSEMBLY): Designed, machined, and assembled in the U.S.A 7075 aluminum body Hard coat anodized for maximum wear protection 3 steel ball detents and locking bolt for a secure lock up RAB-AD MALE ASSEMBLY weighs 1.4 ounces NOTE: The RAB-AD Mini MALE Assembly is compatible with the RAB-AD MINI Female assembly RAB-AD Pic Rail Female Assembly to adapt buffer tube style stock to railed receiver. It is not compatible with standard AR15 rifles as it cannot retain the buffer weight and spring. *Armorers tools provided. Only 3/8 ratchet wrench required*
Der Rapid Attach Buttstock Adapter Mini ermöglicht es dir, die Länge deiner Feuerwaffe erheblich zu reduzieren, um sie kompakt zu lagern und einfach zu transportieren, ohne dass Modifikationen erforderlich sind. Er erlaubt das Anbringen und Abnehmen deines Schaftes oder Pistolengriffs in wenigen Sekunden. So verwendest du ihn: Um zu trennen, ziehe den unteren Freigabetab und drehe gegen den Uhrzeigersinn um 30 Grad. Der Schaft wird dann von der Feuerwaffe getrennt. Um ihn wieder anzubringen, richte die beiden Teile aus, drücke sie hinein und drehe im Uhrzeigersinn um 30 Grad. Der Stahl-Sicherungsmechanismus sichert den Adapter automatisch. Die Konstruktion aus 7075 Aluminium und die Stahl-Innenkomponenten machen den RAB-AD Mini sowohl robust als auch leicht. Der RAB-AD Mini ist für Feuerwaffen konzipiert, die AR-Stil Buffer Tube Stocks verwenden und keine Beibehaltung eines Buffergewichts und einer Feder erfordern. Der RAB-AD Pic Rail ist für Feuerwaffen konzipiert, die MIL-STD-1913 (Picatinny-Schiene) empfangende Vorrichtungen nutzen. RAB-AD Mini Merkmale: Entworfen, bearbeitet und montiert in den USA; 7075 Aluminium-Gehäuse; Hartbeschichtet anodisiert für maximalen Verschleissschutz; 3 Stahlkugeldetents und eine Verriegelungsschraube für eine sichere Verriegelung; RAB-AD wiegt 2 Unzen; Fügt 1,25 Zoll zur Länge des Abzugs hinzu. HINWEIS: Der RAB-AD Mini ist kompatibel mit dem RAB-AD Pic Rail, um einen Buffer Tube Style Schaft an eine railmontierte Vorrichtung anzupassen. Er ist nicht kompatibel mit Standard AR15-Gewehren, da er das Buffergewicht und die Feder nicht halten kann. *Werkzeuge für Rüstmeister sind enthalten. Nur ein 3/8 Ratschen-Schlüssel erforderlich.* RAB-AD Pic Rail Merkmale: Entworfen, bearbeitet und montiert in den USA; 7075 Aluminium-Gehäuse; Hartbeschichtet anodisiert für maximalen Verschleissschutz; 3 Stahlkugeldetents und eine Verriegelungsschraube für eine sichere Verriegelung; RAB-AD wiegt 3,7 Unzen; Fügt 1,46 Zoll zur Länge des Abzugs hinzu. HINWEIS: Kompatibel mit RAB-AD MINI, um eine railmontierte Vorrichtung an einen Buffer Tube Style Schaft anzupassen. *Inbusschlüssel sind enthalten.* RAB-AD MINI (MÄNNLICHE MONTAGE): Entworfen, bearbeitet und montiert in den USA; 7075 Aluminium-Gehäuse; Hartbeschichtet anodisiert für maximalen Verschleissschutz; 3 Stahlkugeldetents und eine Verriegelungsschraube für eine sichere Verriegelung; RAB-AD MÄNNLICHE MONTAGE wiegt 1,4 Unzen. HINWEIS: Die RAB-AD Mini MÄNNLICHE Montage ist kompatibel mit der RAB-AD MINI Weiblichen Montage und der RAB-AD Pic Rail Weiblichen Montage, um einen Buffer Tube Style Schaft an eine railmontierte Vorrichtung anzupassen. Sie ist nicht kompatibel mit Standard AR15-Gewehren, da sie das Buffergewicht und die Feder nicht halten kann. *Werkzeuge für Rüstmeister sind enthalten. Nur ein 3/8 Ratschen-Schlüssel erforderlich.*