Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

EGW
S&W K, L, N, X FRAME REVOLVERS VORTEX VIPER/VENOM SIGHT MOUNT

841370112937 296000666
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
79.9 79.9 1 CHF
Référence: 296000666
EGW SIGHT MOUNT FOR VORTEX VIPER/VENOM FITS S&W K/L/N/XFRAME BLK
Ref Fabricant: 49319 841370112937
79.9 CHF 10 CHF 79.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir Manufacture: Smith & Wesson Matériaux: Aluminum Modèle: K Frame, L Frame, N Frame, X Frame Nombre d'Embases: 1-Pièce Style: Tactique

Caractéristiques

Couleur: Noir Manufacture: Smith & Wesson Matériaux: Aluminum Modèle: K Frame,L Frame,N Frame,X Frame Nombre d'Embases: 1-Pièce Style: Tactique Poids du colis: 0.045kg Hauteur d'expédition: 25mm Largeur d'expédition: 76mm Longueur d'expédition: 140mm

Détails de l'article

Fabriqué au USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletter