Complete rear sight kit replaces the standard blade on your Smith & Wesson revolver and provides a wide, V-shaped notch. Enables faster pick up of the front sight, especially with fine bead and ball front sights. Adjustable for windage. Some “J” frame models may use a smaller head diameter. The screw in this kit has a .217” diameter head.
SPECS: Kit contains sight blade, windage screw, nut, spring, and plug. Available in three blade heights: .122" fits J-frame only; .160" & .196" fit K, L, and N-frame. Blade heights measured from bottom to top of blade, not including lug.
Altro...
Kit di sostituzione vista posteriore completa
Kit mirino posteriore completo sostituisce la lama standard il tuo revolver Smith & Wesson e fornisce una tacca ampia, a forma di V. Consente più veloce pick up del mirino, soprattutto con belle perle e sfere mirini. Regolabile in deriva. Alcuni modelli di telaio "J" possono utilizzare un più piccolo diametro della testa. La vite in questo kit ha un. 217" diametro della testa.
Specifiche: Kit contiene spina, molla, dado, vite di derivazione e lama vista. Disponibile in tre altezze di lama: . 122" si inserisce J-frame solo; . 160" &. 196" in forma K, L e N-frame. Altezze di lama misurata dalla parte inferiore alla parte superiore della lama, non compreso capocorda.
Altro...
Punteggi dei clienti per BROWNELLS S&W K/L/N FRAME .160 V-NOTCH SIGHT KIT
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 2.7
Good idea, not so good fit(14.05.2010)
Love the V-notch idea but, the execution not so much. Looks like poor quality control here. Detent plunger doesn't fit into the hole in the sight adjustment screw head. You can always send it back for a refund or, a replacement. Meanwhile, your revolver sits sightless on the bench.
Best sight I have used on a revolver(30.06.2011)
With the right tools changing the sight out was easy. Improved my shooting substantially, I can now shoot my 629 with precession and that is important when hunting.
Good kit, wrong screw(24.08.2012)
This is the same sight packaged by S&W, but Brownells was kind enough to supply a windage scre, nut, detent and spring. Trouble is that the screw included in this package is for the K,L,N frame not the J frame. The correct windage screw part number is 940-071-620WB. I have brought this problem to Brownell's customer supports attention, and they kindly shipped the proper screw. I'm sure they will resolve this packaging error shortly, but keep it in mind. Thanks Brownells!!!
N. prodotto: 078003004 BROWNELLS S&W K/L/N FRAME .160 V-NOTCH SIGHT KIT Kit mirino posteriore completo sostituisce la lama standard il tuo revolver Smith & Wesson e fornisce una tacca ampia, a forma di V. Consente più veloce pick up del mirino, soprattutto con belle perle e sfere mirini. Regolabile in deriva. Alcuni modelli di telaio "J" possono utilizzare un più piccolo diametro della testa. La vite in questo kit ha un. 217" diametro della testa.
36.9CHF0CHF 36.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonColore delle mire: BlackModello: Universal HandgunsTipo: V-Notch
Adatto per:
Smith & Wesson
Colore delle mire:
Black
Modello:
Universal Handguns
Tipo:
V-Notch
Peso della spedizione: 0.005kgAltezza: 10mmLarghezza: 76mmLunghezza: 165mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 078003002 BROWNELLS S&W J FRAME .122 V-NOTCH SIGHT KIT Kit mirino posteriore completo sostituisce la lama standard il tuo revolver Smith & Wesson e fornisce una tacca ampia, a forma di V. Consente più veloce pick up del mirino, soprattutto con belle perle e sfere mirini. Regolabile in deriva. Alcuni modelli di telaio "J" possono utilizzare un più piccolo diametro della testa. La vite in questo kit ha un. 217" diametro della testa.
29.9CHF0CHF 29.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonColore delle mire: BlackModello: Universal HandgunsTipo: V-Notch
N. prodotto: 078003005 BROWNELLS S&W K/L/N FRAME .196 V-NOTCH SIGHT KIT Kit mirino posteriore completo sostituisce la lama standard il tuo revolver Smith & Wesson e fornisce una tacca ampia, a forma di V. Consente più veloce pick up del mirino, soprattutto con belle perle e sfere mirini. Regolabile in deriva. Alcuni modelli di telaio "J" possono utilizzare un più piccolo diametro della testa. La vite in questo kit ha un. 217" diametro della testa.
35.9CHF0CHF 35.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonColore delle mire: BlackModello: Universal HandgunsTipo: V-Notch
Complete rear sight kit replaces the standard blade on your Smith & Wesson revolver and provides a wide, V-shaped notch. Enables faster pick up of the front sight, especially with fine bead and ball front sights. Adjustable for windage. Some “J” frame models may use a smaller head diameter. The screw in this kit has a .217” diameter head.
SPECS: Kit contains sight blade, windage screw, nut, spring, and plug. Available in three blade heights: .122" fits J-frame only; .160" & .196" fit K, L, and N-frame. Blade heights measured from bottom to top of blade, not including lug.
Altro...
Kit di sostituzione vista posteriore completa
Kit mirino posteriore completo sostituisce la lama standard il tuo revolver Smith & Wesson e fornisce una tacca ampia, a forma di V. Consente più veloce pick up del mirino, soprattutto con belle perle e sfere mirini. Regolabile in deriva. Alcuni modelli di telaio "J" possono utilizzare un più piccolo diametro della testa. La vite in questo kit ha un. 217" diametro della testa.
Specifiche: Kit contiene spina, molla, dado, vite di derivazione e lama vista. Disponibile in tre altezze di lama: . 122" si inserisce J-frame solo; . 160" &. 196" in forma K, L e N-frame. Altezze di lama misurata dalla parte inferiore alla parte superiore della lama, non compreso capocorda.
Altro...
Punteggi dei clienti per BROWNELLS S&W K/L/N FRAME .160 V-NOTCH SIGHT KIT
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 2.7
Good idea, not so good fit(14.05.2010)
Love the V-notch idea but, the execution not so much. Looks like poor quality control here. Detent plunger doesn't fit into the hole in the sight adjustment screw head. You can always send it back for a refund or, a replacement. Meanwhile, your revolver sits sightless on the bench.
Best sight I have used on a revolver(30.06.2011)
With the right tools changing the sight out was easy. Improved my shooting substantially, I can now shoot my 629 with precession and that is important when hunting.
Good kit, wrong screw(24.08.2012)
This is the same sight packaged by S&W, but Brownells was kind enough to supply a windage scre, nut, detent and spring. Trouble is that the screw included in this package is for the K,L,N frame not the J frame. The correct windage screw part number is 940-071-620WB. I have brought this problem to Brownell's customer supports attention, and they kindly shipped the proper screw. I'm sure they will resolve this packaging error shortly, but keep it in mind. Thanks Brownells!!!