SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® 2.0 adds a multi-function finger ring and robust pocket clip to your tactical flashlight. It mounts securely between the light’s tailcap and body, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. The SwitchBack® 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line. It incorporates new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. FEATURES: SwitchBacks can be used with handguns or long guns. It allows the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. New for SwitchBack 2.0: A finger ring that releases under heavy force/torque but can be reset. A stronger pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wider thumb rest with traction features. Small crush ribs on the SwitchBack 2.0’s lip that create a custom fit across a broader range of lights. An aluminum spacer that expands compatibility to Streamlight HL and HL-X flashlights and other manufacturers with similar designs. Installation For installation, first try installing the SwitchBack on your light without use of the O-ring or aluminum washer. Simply unscrew the tailcap, add the SwitchBack, and rescrew the tailcap back on. If the light does not activate upon use of the tailcap switch with the SwitchBack installed, try installing the aluminum washer as shown in the diagram below. Streamlight models tend to require the aluminum washer, but may not, depending on the tailcap features of the light. Elzetta and Surefire models do not usually require the aluminum washer, but users may find that addition of the rubber O-ring will help to stabilize the position of the SwitchBack
Améliore ton expérience de tir avec le SWITCHBACK 2.0 !
Le SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP de THYRM LLC est l'accessoire indispensable pour tout amateur de tir. Il ajoute un anneau multifonction pour les doigts et un clip de poche robuste à ta lampe de poche tactique.
Caractéristiques du produit :
- Montage sécurisé entre le capuchon arrière et le corps de la lampe, offrant un indice de prise répétable lors du déploiement depuis la poche ou le pouch.
- Permet une prise naturelle à deux mains (la technique SwitchBack).
- Utilisation de toutes les techniques traditionnelles en faible luminosité telles que Neck Index, Modified FBI et Harries.
- Retient positivement la lampe lors du tir, du rechargement et de la gestion d'un dysfonctionnement.
- Déploiement rapide et rétention améliorée pendant des activités telles que l'escalade, le camping, l'entretien de voiture et de maison, et l'autodéfense.
Nouveautés du SwitchBack 2.0 :
- Un anneau pour les doigts qui se libère sous une forte force/torque mais peut être réinitialisé.
- Un clip de poche plus solide qui fonctionne également avec le MOLLE/PALS.
- Une position de clip de poche permettant un transport légèrement plus profond que le SwitchBack® Large (original).
- Une partie tubulaire découpée plus bas pour permettre une prise des deux côtés du capuchon arrière lors de l'installation.
- Un repose-pouce plus large avec des caractéristiques de traction.
- De petites nervures sur la lèvre du SwitchBack 2.0 qui créent un ajustement personnalisé pour une plus large gamme de lampes.
- Un espaceur en aluminium qui élargit la compatibilité avec les lampes Streamlight HL et HL-X ainsi que d'autres fabricants avec des conceptions similaires.
Installation :
Pour l'installation, essaie d'abord d'installer le SwitchBack sur ta lampe sans utiliser l'O-ring ou l'espaceur en aluminium. Dévisse simplement le capuchon arrière, ajoute le SwitchBack, et revisse le capuchon arrière. Si la lampe ne s'active pas lors de l'utilisation de l'interrupteur du capuchon arrière avec le SwitchBack installé, essaie d'installer l'espaceur en aluminium comme indiqué dans le diagramme ci-dessous. Les modèles Streamlight nécessitent souvent l'espaceur en aluminium, mais cela peut varier selon les caractéristiques du capuchon arrière de la lampe. Les modèles Elzetta et Surefire ne nécessitent généralement pas l'espaceur en aluminium, mais les utilisateurs peuvent constater que l'ajout de l'O-ring en caoutchouc aide à stabiliser la position du SwitchBack.