SWITCHBACK DF FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® DF adds a multi-function finger ring and robust pocket clip to SureFire’s Dual Fuel Series Flashlights. It mounts securely on the light’s tailcap, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. Featuring the same enhanced features as the SwitchBack® 2.0, the SwitchBack DF Flashlight Ring is the ergonomic upgrade your SureFire Dual Fuel tactical flashlight deserves! It features a larger opening to accept the Dual Fuel’s tailcap and includes an additional lock to ensure it stays in place during hard use. FEATURES: Like all our SwitchBacks, it can be used with handguns or long guns, allowing the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack DF Flashlight Ring also provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. A finger ring that releases under heavy force/torque, but can be reset. A strong pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wide thumb rest with traction features. Small crush ribs on the SwitchBack DF’s lip create a custom fit. Designed and manufactured in the USA. Installation For installation: Unlock the release ring and hold it below the latch on the tube of the SwitchBack; this will deflect the upper locking finger of the tube’s channel. Insert the tailcap until it’s seated at the bottom of the SwitchBack DF’s tube. Reattach the ring to the latch on the tube: This will capture the tailcap within the SwitchBack DF; you can press the top end of it against the tailcap to help seat it. No additional washers or O-rings are needed for installation, but the SureFire O-ring should stay on the light. Note: You do not need to remove the tailcap from the SwitchBack during battery changes. Caution: When changing batteries, be sure to carefully align the tailcap and body of the flashlight and screw down the tailcap without dislodging the sealing O-ring on the body of the flashlight.
Améliore ton expérience de tir avec le SwitchBack DF!
Le SwitchBack DF Flashlight Ring avec clip de poche est un accessoire essentiel pour les lampes de poche de la série Dual Fuel de SureFire. Ce produit ajoute un anneau multifonction et un clip de poche robuste, te permettant de le fixer solidement à la partie inférieure de la lampe.
Caractéristiques du produit :
- Utilisation facile avec des armes de poing ou des armes longues.
- Déploiement fiable et indexation de la lampe de poche depuis les poches et les étuis.
- Prise en main naturelle à deux mains grâce à la SwitchBack Technique.
- Techniques traditionnelles de faible luminosité telles que Neck Index, Modified FBI et Harries.
- Maintien positif de la lampe lors du tir, du rechargement et de la gestion des pannes.
- Déploiement rapide et rétention améliorée lors d'activités comme l'escalade, le camping, l'entretien de la voiture et la défense personnelle.
- Anneau qui se libère sous une forte force/torque mais qui peut être réinitialisé.
- Clip de poche solide compatible avec le webbing MOLLE/PALS.
- Position du clip de poche permettant un port légèrement plus profond que le SwitchBack® Large (original).
- Portion tubulaire découpée plus bas pour une prise sur les deux côtés du capuchon pendant l'installation.
- Large repose-pouce avec des caractéristiques de traction.
- Petits nervures de compression sur le bord du SwitchBack DF créent un ajustement personnalisé.
- Conçu et fabriqué aux États-Unis.
Installation :
Pour installer : Déverrouille l'anneau de libération et maintiens-le en dessous du loquet sur le tube du SwitchBack ; cela déviera le doigt de verrouillage supérieur du canal du tube. Insère le capuchon jusqu'à ce qu'il soit en place au fond du tube du SwitchBack DF. Rattache l'anneau au loquet sur le tube : cela capturera le capuchon à l'intérieur du SwitchBack DF ; tu peux appuyer le haut contre le capuchon pour aider à le mettre en place. Aucun joint supplémentaire ou O-ring n'est nécessaire pour l'installation, mais l'O-ring SureFire doit rester sur la lampe.
Remarque : Tu n'as pas besoin de retirer le capuchon du SwitchBack lors des changements de batterie.
Attention : Lorsque tu changes les batteries, assure-toi d'aligner soigneusement le capuchon et le corps de la lampe de poche, et visse le capuchon sans déloger l'O-ring d'étanchéité sur le corps de la lampe.