SWITCHBACK DF FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® DF adds a multi-function finger ring and robust pocket clip to SureFire’s Dual Fuel Series Flashlights. It mounts securely on the light’s tailcap, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. Featuring the same enhanced features as the SwitchBack® 2.0, the SwitchBack DF Flashlight Ring is the ergonomic upgrade your SureFire Dual Fuel tactical flashlight deserves! It features a larger opening to accept the Dual Fuel’s tailcap and includes an additional lock to ensure it stays in place during hard use. FEATURES: Like all our SwitchBacks, it can be used with handguns or long guns, allowing the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack DF Flashlight Ring also provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. A finger ring that releases under heavy force/torque, but can be reset. A strong pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wide thumb rest with traction features. Small crush ribs on the SwitchBack DF’s lip create a custom fit. Designed and manufactured in the USA. Installation For installation: Unlock the release ring and hold it below the latch on the tube of the SwitchBack; this will deflect the upper locking finger of the tube’s channel. Insert the tailcap until it’s seated at the bottom of the SwitchBack DF’s tube. Reattach the ring to the latch on the tube: This will capture the tailcap within the SwitchBack DF; you can press the top end of it against the tailcap to help seat it. No additional washers or O-rings are needed for installation, but the SureFire O-ring should stay on the light. Note: You do not need to remove the tailcap from the SwitchBack during battery changes. Caution: When changing batteries, be sure to carefully align the tailcap and body of the flashlight and screw down the tailcap without dislodging the sealing O-ring on the body of the flashlight.
Scopri il nuovo SwitchBack DF Flashlight Ring con clip per tasca!
Il SwitchBack® DF Flashlight Ring è un accessorio innovativo che aggiunge un anello multifunzionale per le dita e una robusta clip per tasca alle torce SureFire della serie Dual Fuel. Si monta in modo sicuro sul cappuccio posteriore della torcia, fornendo un indice di presa ripetibile durante il prelievo dalla tasca o dalla borsa, e migliora l'ergonomia durante il tiro o la ricerca.
Caratteristiche principali:
- Compatibile con pistole e fucili, permettendo all'utente di:
- Distribuire e indicizzare la torcia in modo affidabile da tasche e borse, utilizzando l'anello di ritenzione rigido ma rilasciabile dello SwitchBack.
- Tirare con una presa naturale a due mani (tecnica SwitchBack).
- Utilizzare tutte le tecniche tradizionali di bassa luminosità come Neck Index, Modified FBI e Harries.
- Ritenere positivamente la torcia durante il prelievo di un'arma da fuoco, il ricaricamento e la gestione di un malfunzionamento.
- Fornisce un rapido dispiegamento e una migliore ritenzione durante molte attività come arrampicata, escursionismo, manutenzione di auto e casa, e autodifesa.
- Anello per le dita che si rilascia sotto forte forza/torque, ma può essere ripristinato.
- Robusta clip per tasca che funziona anche con le cinghie MOLLE/PALS.
- Posizione della clip per tasca che consente un trasporto leggermente più profondo rispetto allo SwitchBack® Large (originale).
- Portione tubolare tagliata più bassa per consentire una presa su entrambi i lati del cappuccio posteriore durante l'installazione.
- Ampio poggiapollice con caratteristiche di trazione.
- Piccole nervature di compressione sul bordo dello SwitchBack DF creano una vestibilità personalizzata.
- Progettato e fabbricato negli USA.
Istruzioni per l'installazione:
Per l'installazione: Sblocca l'anello di rilascio e tienilo sotto il gancio sul tubo dello SwitchBack; questo defletterà il dito di bloccaggio superiore del canale del tubo. Inserisci il cappuccio posteriore fino a quando non è posizionato sul fondo del tubo dello SwitchBack DF. Riattacca l'anello al gancio sul tubo: questo catturerà il cappuccio posteriore all'interno dello SwitchBack DF; puoi premere l'estremità superiore contro il cappuccio posteriore per aiutare a posizionarlo. Non sono necessari ulteriori rondelle o O-ring per l'installazione, ma l'O-ring SureFire deve rimanere sulla torcia.
Nota: Non è necessario rimuovere il cappuccio posteriore dallo SwitchBack durante le sostituzioni della batteria.
Attenzione: Quando cambi le batterie, assicurati di allineare con attenzione il cappuccio posteriore e il corpo della torcia e avvitare il cappuccio posteriore senza dislocare l'O-ring di tenuta sul corpo della torcia.