Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
611760420009 749012736
The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.
319.9 319.9 1 CHF
Référence: 749012736
REDDING SAECO LEAD HARDNESS TESTER
Ref Fabricant: 42000 611760420009 Le testeur de dureté de plomb SAECO vous permet d'identifier avec certitude la dureté de vos balles de plomb coulé, vérifier qu'ils sont sûrs de tirer et n'endommagent pas votre arme précieuse. Vous pouvez monter des balles de plomb de la ferraille et vérifier leur dureté, alors vous pouvez tirer dessus en toute confiance. Ou vérifier la dureté de vos balles de jeter de la poudre noire pour assurer la mise en place appropriée dans l'exactitude rayures et cohérente pour la concurrence RFPB. Juste insérer la balle dans le boîtier en aluminium, tournez le pénétrateur acier trempé jusqu'à la butée, puis lire la profondeur de pénétration sur l'échelle de vernier pour déterminer la dureté. Le testeur est étalonné de 0 à 10 selon l'échelle de la SAECO. Il faut une dureté d'au moins 6 pour des vitesses moyennes dans les armes de poing, tout en une lecture de plus de 8 fonctionne mieux pour les balles de magnum arme de poing ou de balles de fusil à gaz d'une vérification. (Pour référence, masses d'alourdissement test habituellement entre 7 et 9, et linotype lit normalement un 10.) Un outil indispensable pour quelqu'un de sérieux au sujet de coulée de la balle.
319.9 CHF 5 CHF 319.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.204kg Hauteur d'expédition: 33mm Largeur d'expédition: 38mm Longueur d'expédition: 160mm

Détails de l'article

Fabriqué au USA



The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.
Newsletter