Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
184020002
Save Polishing Time, Prevent Ripples & Flat Spots
Fastest way to polish barrels and magazine tubes with no ripples or flat spots. Cheaper and easier to use than a lathe. Just secure the barrel between the non-marring, Delrin® centers, turn on the buffer, and touch the barrel to the buffing wheel or expandable sanding drum. As the barrel spins, slide it across the wheel, varying the angle and pressure to get the best cut.

SPECS: Extruded aluminum. Frame - 36" (91.4cm) long, 1" (2.5cm) square. Accepts 32" (81.3cm) barrels. Spinner Centers – Delrin, replaceable. Support Arms - 4-1/2" (11.4cm) x 1-7/8" (4.8cm), socket head lock screws. 1-1/2" (3.8cm) swing.

37.9 259.9 2 CHF
N. prodotto: 184020002
CLYMER STD BARREL SPINNER CENTERS
Parti Fabbricante: DC Modo più veloce per lucidare i barili e rivista tubi senza increspature o macchie piane. Più conveniente e facile da usare di un tornio. Basta fissare la canna tra i centri di Delrin ® non guastare, accendere il buffer e toccare la canna alla rotella di lucidatura o tamburo levigatura espandibile. Come la canna gira, farlo scorrere attraverso la ruota, variando l'angolo e la pressione per ottenere il taglio migliore.
37.9 CHF 28 CHF 37.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche

Peso della spedizione: 0.014kg Altezza di spedizione: 13mm Larghezza di spedizione: 83mm Lunghezza di spedizione: 146mm

Dettagli dell'elemento

Made in Usa



N. prodotto: 184020000
CLYMER STD BARREL SPINNER
Parti Fabbricante: BP Modo più veloce per lucidare i barili e rivista tubi senza increspature o macchie piane. Più conveniente e facile da usare di un tornio. Basta fissare la canna tra i centri di Delrin ® non guastare, accendere il buffer e toccare la canna alla rotella di lucidatura o tamburo levigatura espandibile. Come la canna gira, farlo scorrere attraverso la ruota, variando l'angolo e la pressione per ottenere il taglio migliore.
259.9 CHF 0 CHF 259.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Save Polishing Time, Prevent Ripples & Flat Spots
Fastest way to polish barrels and magazine tubes with no ripples or flat spots. Cheaper and easier to use than a lathe. Just secure the barrel between the non-marring, Delrin® centers, turn on the buffer, and touch the barrel to the buffing wheel or expandable sanding drum. As the barrel spins, slide it across the wheel, varying the angle and pressure to get the best cut.

SPECS: Extruded aluminum. Frame - 36" (91.4cm) long, 1" (2.5cm) square. Accepts 32" (81.3cm) barrels. Spinner Centers – Delrin, replaceable. Support Arms - 4-1/2" (11.4cm) x 1-7/8" (4.8cm), socket head lock screws. 1-1/2" (3.8cm) swing.

Newsletter