Keep those heavy tactical scopes, rings and bases locked solidly to the receiver by converting your rifle s 6-48 mount screws to the stronger 8-40 screw size. Kit contains everything you need: 12 each of 8-40 x 1⁄4" and 3⁄8" Socket or Torx head screws, #19S and #28S drill bit, a taper tap and a bottom tap, plus one Fillister counterbore and our Screw Gizzie.
SPECS: Screws are steel, blued. High speed steel drill bits, taps and counterbore. Refills sold per 12 pak.
Altro...
Forte, 8-40 viti aiutare a prevenire l'ambito "Flyoff"
Mantenere quegli ambiti tattici pesanti, anelli e basi solidamente bloccati al ricevitore convertendo il tuo fucile s 6-48 montare le viti a più forte dimensione vite 8-40. Kit contiene tutto il necessario: 12 di 8-40 x 1 ⁄ 4 "e tre" Socket o Torx viti, # 19 e #28S drill bit, un cono toccare e un rubinetto di fondo, oltre a una lamatura cilindrica e nostre vite Gizzie.
Specifiche: le viti sono in acciaio, brunito. Acciaio ad alta velocità drill bit, rubinetti e lamatura. Ricariche venduti per 12 Pak.
Altro...
Punteggi dei clienti per BROWNELLS TACTICAL SCOPE BASE CONVERSION KIT TORX
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 1
more than a show than go..(27.12.2013)
I am a machinist in Europe and do my own gun-smithing where money is no object on my BR guns. I bought some extra taps with this set but four pc were in 8-40 and only one off them is straight.... and not only that but that on is a tad oversize !. On this custom action I am adding two extra base holes for my custom one piece base I am installing and I can not even hand-fit the tap in the existing holes on the action.. But the rest of this set is NICE and well thought out.
N. prodotto: 080912001 BROWNELLS TACTICAL SCOPE BASE CONVERSION KIT TORX050806107816 Mantenere quegli ambiti tattici pesanti, anelli e basi solidamente bloccati al ricevitore convertendo il tuo fucile s 6-48 montare le viti a più forte dimensione vite 8-40. Kit contiene tutto il necessario: 12 di 8-40 x 1 ⁄ 4 "e tre" Socket o Torx viti, # 19 e #28S drill bit, un cono toccare e un rubinetto di fondo, oltre a una lamatura cilindrica e nostre vite Gizzie.
84.9CHF0CHF 84.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Peso della spedizione: 0.204kgAltezza: 36mmLarghezza: 97mmLunghezza: 175mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 080912000 BROWNELLS TACTICAL SCOPE BASE CONVERSION KIT SOCKET050806103160 Mantenere quegli ambiti tattici pesanti, anelli e basi solidamente bloccati al ricevitore convertendo il tuo fucile s 6-48 montare le viti a più forte dimensione vite 8-40. Kit contiene tutto il necessario: 12 di 8-40 x 1 ⁄ 4 "e tre" Socket o Torx viti, # 19 e #28S drill bit, un cono toccare e un rubinetto di fondo, oltre a una lamatura cilindrica e nostre vite Gizzie.
84.9CHF0CHF 84.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Keep those heavy tactical scopes, rings and bases locked solidly to the receiver by converting your rifle s 6-48 mount screws to the stronger 8-40 screw size. Kit contains everything you need: 12 each of 8-40 x 1⁄4" and 3⁄8" Socket or Torx head screws, #19S and #28S drill bit, a taper tap and a bottom tap, plus one Fillister counterbore and our Screw Gizzie.
SPECS: Screws are steel, blued. High speed steel drill bits, taps and counterbore. Refills sold per 12 pak.
Altro...
Forte, 8-40 viti aiutare a prevenire l'ambito "Flyoff"
Mantenere quegli ambiti tattici pesanti, anelli e basi solidamente bloccati al ricevitore convertendo il tuo fucile s 6-48 montare le viti a più forte dimensione vite 8-40. Kit contiene tutto il necessario: 12 di 8-40 x 1 ⁄ 4 "e tre" Socket o Torx viti, # 19 e #28S drill bit, un cono toccare e un rubinetto di fondo, oltre a una lamatura cilindrica e nostre vite Gizzie.
Specifiche: le viti sono in acciaio, brunito. Acciaio ad alta velocità drill bit, rubinetti e lamatura. Ricariche venduti per 12 Pak.
Altro...
Punteggi dei clienti per BROWNELLS TACTICAL SCOPE BASE CONVERSION KIT TORX
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 1
more than a show than go..(27.12.2013)
I am a machinist in Europe and do my own gun-smithing where money is no object on my BR guns. I bought some extra taps with this set but four pc were in 8-40 and only one off them is straight.... and not only that but that on is a tad oversize !. On this custom action I am adding two extra base holes for my custom one piece base I am installing and I can not even hand-fit the tap in the existing holes on the action.. But the rest of this set is NICE and well thought out.