CELLVAULT-21 BATTERY STORAGE FOR 21700 AND STREAMLIGHT SL-B50 Protect your spare 21700 battery while keeping it immediately accessible with the CellVault-21 Rechargeable Battery Storage. Premium batteries require protection from physical and environmental damage but need to remain accessible to keep advanced tactical lights running at full power. The CellVault-21 Rechargeable Battery Storage provides the same feature set as our popular CellVault-18 including dual-wall construction & side viewing windows but adds a larger capacity and an upgraded latch that allows for easy installation, especially on tight MOLLE/PALS webbing. FEATURES: Holds one 21700 Rechargeable Battery Holds one Streamlight SL-B50 Battery (with foam removed) Waterproof O-ring seal rated to IPX7 at 2 meters for 30+ minutes Secure metal latch seals and attaches the CellVault-21 to gear Silicone foam shock absorber/noise silencer Clear side windows allow for gear status checks Slim profile: less than 1 MOLLE/PALS column wide for easy integration into existing gear configurations Detachable latch installs easily on all MOLLE and can be backed up with the included security pin Designed and manufactured in the USA INSTALLATION: Unlock the bottom latch and open the CellVault-21. Press the release tab with a screwdriver or similar tool to release the latch from the back strap. Insert the back strap through the MOLLE/PALS webbing. Align the side tabs and snap the latch back into the back strap. Install additional security pin through both the latch and back strap if necessary. Verify foam shock absorber is at the bottom of the CellVault-21 tube. Insert battery with the positive (+) terminal towards the foam at the bottom. Close the latch, making sure no material is caught in the tube/cap interface.
Proteggi e accedi facilmente alla tua batteria 21700 con CellVault-21!
Il CELLVAULT-21 BATTERY STORAGE è progettato per mantenere la tua batteria 21700 e la batteria Streamlight SL-B50 sempre a portata di mano e protette da danni fisici e ambientali.
Descrizione del prodotto
Le batterie premium richiedono protezione, ma devono rimanere accessibili per garantire che le luci tattiche avanzate funzionino sempre al massimo. Il CellVault-21 offre le stesse caratteristiche del nostro popolare CellVault-18, inclusa la costruzione a doppia parete e le finestre laterali, ma con una maggiore capacità e una chiusura migliorata che consente un'installazione facile, specialmente su MOLLE/PALS webbing stretto.
- Contiene una batteria ricaricabile 21700
- Contiene una batteria Streamlight SL-B50 (con schiuma rimossa)
- Guarnizione O-ring impermeabile classificata IPX7 a 2 metri per oltre 30 minuti
- Chiusura metallica sicura che fissa il CellVault-21 all'attrezzatura
- Assorbitore di urti in schiuma di silicone/silenziatore di rumore
- Finestre laterali trasparenti per controlli dello stato dell'attrezzatura
- Profilo sottile: meno di 1 colonna MOLLE/PALS per una facile integrazione nelle configurazioni esistenti
- Chiusura staccabile che si installa facilmente su tutto il MOLLE e può essere supportata con il perno di sicurezza incluso
- Progettato e prodotto negli Stati Uniti
Installazione
- Sblocca la chiusura inferiore e apri il CellVault-21.
- Premi il pulsante di rilascio con un cacciavite o uno strumento simile per rilasciare la chiusura dalla fascia posteriore.
- Inserisci la fascia posteriore attraverso il webbing MOLLE/PALS.
- Allinea le linguette laterali e riattacca la chiusura alla fascia posteriore.
- Installa il perno di sicurezza aggiuntivo attraverso sia la chiusura che la fascia posteriore, se necessario.
- Verifica che l'assorbitore di urti in schiuma sia in fondo al tubo del CellVault-21.
- Inserisci la batteria con il terminale positivo (+) rivolto verso la schiuma in fondo.
- Chiudi la chiusura, assicurandoti che nessun materiale sia bloccato nell'interfaccia tubo/cappuccio.