Eigenschaften
- Matrizentyp: Die Sets (Complete)
- Patrone: 270 Winchester
- Versandgewicht: 0.703kg
- Versandhöhe: 36mm
- Versandbreite: 122mm
- Versandlänge: 148mm
- UPC: 734307905934
Artikel-Nr.: 100053457
Herst.-Nr.: 90593
734307905934 Wähle dieses Matrizenset für maximale Vielseitigkeit. Das Set enthält eine Voll-Längen-Rückform-Matrize, um Messing auf die Abmessungen wie neu aus der Fabrik zurückzubringen, perfekt zum Wiederladen von Messing, das in anderen Waffen abgefeuert wurde. Die Collet-Halsgrössenmatrize wird auf deinem feuergeformten Messing verwendet und bietet dir die bestmögliche Genauigkeit. Kein Hülsenfett erforderlich und die Hülsen halten fast ewig. Die Easy Adjust Dead Length Bullet Seating Die macht die Einstellung der Geschossplatzierung narrensicher und sorgt jedes Mal für die perfekte Sitztiefe. Die Factory Crimp Die sorgt für einen sicheren Crimp bei Geschossen mit oder ohne Crimp-Rille. In den meisten Fällen hilft sie der Genauigkeit, indem sie einen gleichmässigen höheren Startdruck erzeugt und der fertigen Patrone eine Genauigkeit und Zuverlässigkeit wie aus der Fabrik verleiht. Das Set ist komplett, mit Hülsenhalter, Pulverwaage und den berühmten Lee-Ladedaten, die alle gängigen Pulvermarken in einem leicht lesbaren, logischen Format organisiert enthalten. Enthält eine Voll-Längen-Grösse, Collet-Halsgrösse, Easy Adjust Dead Length Bullet Seating Die & Factory Crimp Die.
Kostenloser Versand ab CHF 399.00.
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Sub-Moa in a Savage model 10 11.09.2017
All of my brass has been once fired through my rifle only, so I primarily use the neck sizing die only and full length size only if the brass gets to tight to chamber. First reloads with these dies produced accurate and repeatable results, and all groups were between 1-2". After testing with different charge weights, powder, and seating depth groups dropped down to a consistent sub-moa groups. avg around 3/4.
Lee Prcision 4-Die set advantages 09.03.2017
Most of the Lee sets do not always include the Factory Crimp die. This is why I opted for the 4 die set. The included shell holder is not something you get with RCBS and other Die sets. Since I use a Universal De-priming die for almost every case, the pin in the full length re-sizing die is the first thing to go. I still need to use a Small base resizing die set for brass fired in other rifles. I reload for both an M1A and a DPMS Recon G2. For 7.62x51 and .308 this set is all you need for new brass . Once fired brass might need both the Lee set and an additional SB resizing die to cover all of your needs. I have Lee die sets for many rifle and pistol calibers... as well as Hornady and RCBS and others. Reliable and accurate for my needs.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.