FORSTER PRODUCTS, INC.
ULTRA™ MICROMETER SEATER DIES

757253006647 749006864

Forster Reloading Dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature their Forster Cross Bolt Die Locking Ring that tightens the two ends of the split ring instead of tightening a screw directly into the threads of the die. The Forster Ultra Seater includes all of the features of the Forster Bench Rest Seater Die above, plus an ultra accurate micrometer adjustment. This micrometer adjustment allows you to adjust bullet seating depth from .0005 inch to .001 inch increments, and makes switching bullets easy - just dial back to your previous recorded setting. Forster Ultra Seaters make fine tuning your bullets to the lands of your rifling simple.

Altro...

Forster ricarico muore sono di ottima qualità e fornire il reloader con la capacità di produrre giri concentrici di volta in volta. Ogni stampo è prodotto dalle migliori acciaio di qualità accuratamente lavorate con tolleranze molto strette. Muore sono lucidati prima e dopo il processo di trattamento termico per garantire una finitura extra fine a mano. Tutti gli stampi di ricarico Forster caratteristica loro Forster Cross bullone dado ghiera che stringe le due estremità dell'anello split invece stringendo una vite direttamente nel thread di stampo. Il posti Ultra Forster include tutte le caratteristiche di Forster Bench Rest Seater Die sopra, più una regolazione ultra preciso micrometro. Questa regolazione micrometrica consente di regolare il proiettile profondità da.0005 pollice a pollice.001 incrementi di posti a sedere e rende facile commutazione proiettili - linea appena torna al tuo precedente impostazione registrata. Forster Ultra Seaters fare intonazione vostri proiettili verso le terre del tuo semplice rigatura fine.

Altro...

Punteggi dei clienti per FORSTER PRODUCTS, INC. 308 WINCHESTER MICROMETER SEATER DIE

Numero di punteggi: 9
Da brownells.com: 8
Punteggio medio: 4.3

Excellent (03.11.2019)

Run out around 0.001 most If not all below 0.002. some variance in length 0.003 with eldx but only part of it is to blame on the die. Micrometer might not be necessary but for me makes it a lot easier to find the settings

Good..Better...Best (09.02.2011)

If I could give this product more than 5 stars then I would...And it deserves it...
Similar products claim to do a good job but simply put, there is no concentricity issues at all with these dies...
When the handle on the press is operated it is a single fluid motion that seats the projectile.
My reloads are now more accurate than I have ever made them.
EVERY reloader should have one of these.
ABRACADABRA is usually a word saved for magicians but is truely at home with Forster products. In fact, I think they should change the dictionary to say ABRACADABRA & FORSTER mean the same thing.

The Best I've Found (18.12.2011)

I wish they made these for pistols!!! Perfect bullet alignment, and due to the design you can compact the powder, unlike with some other designs. The fact that it is one of the less expensive choices is an added plus. Always perfect OAL and perfectly repeatable. The only choice, in my opinion.

Does not work in a Dillon 1050 press (20.04.2016)

Seems well made, but I couldn't use it with my 1050. That needs to be in the description.

Good but needed some work (04.05.2017)

I use this to load for my AR, a Ruger Ranch Rifle and a TC Encore. It works fine but when I first received it some work was needed. I noticed that the sliding sleeve would catch partway up and found that the roll marking on the bottom of the sleeve was raised sufficiently to drag on the outer housing. It was significant and I have no doubt it would have caused issues. Also, the seater plug had a ridge around the bottom where the bullet entered that cause significant drag in the sleeve. A bit of careful stoning made things better although the seater still feels a bit rough in the sleeve. Roll marking after precision machining on the sleeve seems like a real bad idea.

Good die but not for VLD bullets (12.05.2018)

I have several of these Forster Ultra Micrometer Seating Dies in various calibers. All have worked very well with standard weight for caliber bullets of conventional shape. I bought this die to seat heavy for caliber bullets in a .223 bolt gun. Although the 80 grain Sierra Match King bullet is not technically a VLD design the seating stem of this die would not engage the bullet consistently. Seating depths would vary by a much as 10 thousandths of an inch. Sometimes the bullet tip would bottom out inside the cup of the seating stem. After diagnosing the problem I discovered Forster does not have a VLD stem available. I returned this die to Brownells and purchased another manufacturer's die that has a VLD stem. This is a very good seating die but perhaps not appropriate for long profile bullets.

Best I've Found (18.12.2011)

Forster ultra seater 300WM (12.04.2011)

Easily adjustable O.A.L., Outstanding concentricity!

Forster Micrometer seater die - .223 Rem (19.12.2016)

I purchased a Foster "micrometer seating die" (.223 Rem.) at the same time I purchased my Forster Co-Ax single stage press (several years ago). What a nice combination. The Forster Co-Ax press works beautifully when reloading rifle cartridges and their seating die produces consistent results with little or no run out. I use to use a Lee seating die and get "so-so" results. Not knocking Lee dies because I use them for most of my reloading in pistol and some rifle work (neck sizing - crimping). The Forster micro seating die is a great addition to my reloading arsenal of equipment. I just purchased another one in .308 Win. I believe that speaks for itself. Excellent quality and excellent control of COAL and run out. Great combination when used with a Co-Ax press.

Leggi più recensioni su brownells.com

124.9 174.9 48 CHF

N. prodotto: 749006864
FORSTER PRODUCTS, INC. 308 WINCHESTER MICROMETER SEATER DIE
Parti Fabbricante: U00107 757253006647 Forster ricarico muore sono di ottima qualità e fornire il reloader con la capacità di produrre giri concentrici di volta in volta. Ogni stampo è prodotto dalle migliori acciaio di qualità accuratamente lavorate con tolleranze molto strette. Muore sono lucidati prima e dopo il processo di trattamento termico per garantire una finitura extra fine a mano. Tutti gli stampi di ricarico Forster caratteristica loro Forster Cross bullone dado ghiera che stringe le due estremità dell'anello split invece stringendo una vite direttamente nel thread di stampo. Il posti Ultra Forster include tutte le caratteristiche di Forster Bench Rest Seater Die sopra, più una regolazione ultra preciso micrometro. Questa regolazione micrometrica consente di regolare il proiettile profondità da.0005 pollice a pollice.001 incrementi di posti a sedere e rende facile commutazione proiettili - linea appena torna al tuo precedente impostazione registrata. Forster Ultra Seaters fare intonazione vostri proiettili verso le terre del tuo semplice rigatura fine.

169.9 CHF 7 CHF 169.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Cartuccia: 308 Winchester Matrice tipo: Bullet Seating Dies

FORSTER PRODUCTS, INC. ULTRA™ MICROMETER SEATER DIES

Punteggi dei clienti per FORSTER PRODUCTS, INC. 308 WINCHESTER MICROMETER SEATER DIE

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per FORSTER PRODUCTS, INC. 308 WINCHESTER MICROMETER SEATER DIE

FORSTER PRODUCTS, INC.
ULTRA™ MICROMETER SEATER DIES