Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
713000083
Easily Removes Screw-In Extractor Rods Without Damage To Rod Or Cylinder Yoke
Easy to use tool enables fast removal and reinstallation of screw-in extractor rods from double action revolvers without damage to rod or cylinder yoke. Specifically designed for Smith & Wesson J/K/L/N frame models and Ruger® Security-Six® and Speed-Six®, but will work on almost any similar screw-in rod. Just slide the extractor rod into the correct-size grooves on the tool, close the tool halves around the rod by tightening the two hex head bolts on either side of the rod using the included Allen wrench, and simply unscrew the rod with the tool while holding the cylinder. Grooves are precision machined to provide complete, 100% contact with the rod. Tool body of 6061 T6 aluminum is strong enough to provide years of service, yet soft enough to aid in securely gripping polished steel extractor rod without slippage or marring of rod surface.
SPECS: Aluminum, anodized, natural silver finish. Steel bolts, black oxide finish. Fits Smith & Wesson J, K, L and N frame revolvers and clones, Ruger Security-Six/Speed-Six, and older revolvers with button heads on the extractor rod front. Includes hex wrench and instructions.
64.9 64.9 1 CHF
Référence: 713000083
POWER CUSTOM UNIVERSAL EXTRACTOR ROD WRENCH
Ref Fabricant: NONE Outil facile à utiliser permet la dépose rapide et la réinstallation des tiges d'extracteur de vis-à de doubles revolvers d'action sans dommage au joug de tige ou de cylindre. Spécifiquement conçu pour les modèles à armature Smith & Wesson J/K/L/N et Ruger Security-Six ® et ® de vitesse-Six, mais fonctionnera sur presque n'importe quel similaires à visser la tige. Juste glisser la tige de l'extracteur dans les rainures de corriger-taille sur l'outil, fermer les moitiés de l'outil autour de la tige en serrant les deux boulons à tête hexagonale de chaque côté de la tige à l'aide de la clé Allen fournie et simplement Dévisser la tige avec l'outil tout en tenant la bouteille. Rainures sont précision usinée pour fournir complet, 100 % de contact avec la tige. Corps de l'outil en aluminium 6061 T6 est assez forte pour fournir des années de service, encore assez doux pour aider à saisir solidement tige de l'extracteur en acier poli sans glissement ou rayures de surface de la tige.
64.9 CHF 4 CHF 64.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: Universel Arme de Poing

Caractéristiques

Manufacture: Universel Arme de Poing Poids du colis: 0.136kg Hauteur d'expédition: 20mm Largeur d'expédition: 108mm Longueur d'expédition: 208mm

Détails de l'article

Fabriqué au USA



Easily Removes Screw-In Extractor Rods Without Damage To Rod Or Cylinder Yoke
Easy to use tool enables fast removal and reinstallation of screw-in extractor rods from double action revolvers without damage to rod or cylinder yoke. Specifically designed for Smith & Wesson J/K/L/N frame models and Ruger® Security-Six® and Speed-Six®, but will work on almost any similar screw-in rod. Just slide the extractor rod into the correct-size grooves on the tool, close the tool halves around the rod by tightening the two hex head bolts on either side of the rod using the included Allen wrench, and simply unscrew the rod with the tool while holding the cylinder. Grooves are precision machined to provide complete, 100% contact with the rod. Tool body of 6061 T6 aluminum is strong enough to provide years of service, yet soft enough to aid in securely gripping polished steel extractor rod without slippage or marring of rod surface.
SPECS: Aluminum, anodized, natural silver finish. Steel bolts, black oxide finish. Fits Smith & Wesson J, K, L and N frame revolvers and clones, Ruger Security-Six/Speed-Six, and older revolvers with button heads on the extractor rod front. Includes hex wrench and instructions.
Newsletter