Stainless Steel Allen Head Screws For Maximum Torque
Replace worn or damaged factory triggerguard screws with these stainless steel, Allen head screws that allow you to apply maximum torque without slipping and damaging the screw head or the stock. Set includes three standard-length screws, plus 5⁄32" Allen wrench. May require minor alteration to screw heads to fit custom bottom metal.
Remplacer vis triggerguard usine usées ou endommagées par ces inox, vis à tête Allen qui vous permettent d'appliquer un couple maximal sans glissement et endommager la tête de la vis ou le stock. Ensemble comprend trois vis de longueur standard, plus 5⁄32 "clé Allen. Peut exiger une modification mineure à visser des têtes pour s'adapter à métal fond personnalisé.
CARACTÉRISTIQUES : acier inoxydable, finition naturelle. Comprend : (1) avant garde vis, 15/16"(3,3 cm) de long ; (1) vis de pare-main centre, 1-5/8"(4,1 cm) de long ; (1) vis de l’arrière garde de, 1-13/16"(4,7 cm) de long. Correspond à triggerguards Winchester modèle 70.
Plus...
Évaluations client de NECG MODEL 70 TRIGGERGUARD SCREW SET
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3.8
Will not a fit a post-64 rifle(09.08.2010)
Althought the description does not say so, according to the Brownells techs these screws are for a pre-64 rifle. Two of the screws are too long for my Model 70 Classic.
Works well.(07.04.2011)
I prefer my screws to be long so that I can cut them to fit.
Great buy for model 70 owners(15.05.2013)
The screws worked great for me and they will fit post 64 rifles, the newer verson of the model 70. I did shorten the rear screw about .125" to match the one that came with the rifle as far as length. I may not have bottomed out anyway. But it is a easy fix to reduce the rear screw .125"
"PRACTICALLY PERFECT" IN EVERY WAY !!!!!(21.07.2017)
THESE ARE A GREAT FIT ON A WIN 70 / 670, MOSS 800 SERIES, OR THE MOSIN-NAGANT. THEY ALL USE THE .250" X 32 THREAD PATTERN. YES, THEY ARE LONGER IN LENGTH FOR SOME STOCK DIMENSIONS, BUT CAN EASILY BE CHUCKED INTO A DRILL, SPIN, & HOLD AGAINST THE GRINDING WHEEL ON A BENCH GRINDER & FIT TO THE LENGTH REQUIRED. ON SOME RIFLES, THE LENGTH MAY BE JUST PERFECT AS IS, BUT LONGER IS BETTER THAN TOO SHORT !!!!!!!-------OOORAH & SEMPER FIDELIS.
Référence: 661000057 NECG MODEL 70 TRIGGERGUARD SCREW SET Ref Fabricant: N70 Remplacer vis triggerguard usine usées ou endommagées par ces inox, vis à tête Allen qui vous permettent d'appliquer un couple maximal sans glissement et endommager la tête de la vis ou le stock. Ensemble comprend trois vis de longueur standard, plus 5⁄32 "clé Allen. Peut exiger une modification mineure à visser des têtes pour s'adapter à métal fond personnalisé.
37.9CHF24CHF 37.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Stainless Steel Allen Head Screws For Maximum Torque
Replace worn or damaged factory triggerguard screws with these stainless steel, Allen head screws that allow you to apply maximum torque without slipping and damaging the screw head or the stock. Set includes three standard-length screws, plus 5⁄32" Allen wrench. May require minor alteration to screw heads to fit custom bottom metal.
Remplacer vis triggerguard usine usées ou endommagées par ces inox, vis à tête Allen qui vous permettent d'appliquer un couple maximal sans glissement et endommager la tête de la vis ou le stock. Ensemble comprend trois vis de longueur standard, plus 5⁄32 "clé Allen. Peut exiger une modification mineure à visser des têtes pour s'adapter à métal fond personnalisé.
CARACTÉRISTIQUES : acier inoxydable, finition naturelle. Comprend : (1) avant garde vis, 15/16"(3,3 cm) de long ; (1) vis de pare-main centre, 1-5/8"(4,1 cm) de long ; (1) vis de l’arrière garde de, 1-13/16"(4,7 cm) de long. Correspond à triggerguards Winchester modèle 70.
Plus...
Évaluations client de NECG MODEL 70 TRIGGERGUARD SCREW SET
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3.8
Will not a fit a post-64 rifle(09.08.2010)
Althought the description does not say so, according to the Brownells techs these screws are for a pre-64 rifle. Two of the screws are too long for my Model 70 Classic.
Works well.(07.04.2011)
I prefer my screws to be long so that I can cut them to fit.
Great buy for model 70 owners(15.05.2013)
The screws worked great for me and they will fit post 64 rifles, the newer verson of the model 70. I did shorten the rear screw about .125" to match the one that came with the rifle as far as length. I may not have bottomed out anyway. But it is a easy fix to reduce the rear screw .125"
"PRACTICALLY PERFECT" IN EVERY WAY !!!!!(21.07.2017)
THESE ARE A GREAT FIT ON A WIN 70 / 670, MOSS 800 SERIES, OR THE MOSIN-NAGANT. THEY ALL USE THE .250" X 32 THREAD PATTERN. YES, THEY ARE LONGER IN LENGTH FOR SOME STOCK DIMENSIONS, BUT CAN EASILY BE CHUCKED INTO A DRILL, SPIN, & HOLD AGAINST THE GRINDING WHEEL ON A BENCH GRINDER & FIT TO THE LENGTH REQUIRED. ON SOME RIFLES, THE LENGTH MAY BE JUST PERFECT AS IS, BUT LONGER IS BETTER THAN TOO SHORT !!!!!!!-------OOORAH & SEMPER FIDELIS.