Stainless Steel Allen Head Screws For Maximum Torque
Replace worn or damaged factory triggerguard screws with these stainless steel, Allen head screws that allow you to apply maximum torque without slipping and damaging the screw head or the stock. Set includes three standard-length screws, plus 5⁄32" Allen wrench. May require minor alteration to screw heads to fit custom bottom metal.
Viti Allen Head in acciaio inox per la coppia massima
Sostituire viti controcartella fabbrica usurate o danneggiate con questi in acciaio inox, viti esagonali che consentono di applicare la coppia massima senza scivolare e danneggiare la testa della vite o il brodo. Set comprende tre viti di lunghezza standard, più 5⁄32 "chiave a brugola. Possono richiedere minore alterazione a teste per adattarsi metallo personalizzata fondo a vite.
SPEC.: acciaio inossidabile, finitura naturale. Include: (1) anteriore di protezione vite, 15/16"(3,3 cm) di lunghezza; (1) Centro protezione vite, 1-5/8"(4,1 cm) di lunghezza; (1) protezione posteriore vite, 1-13/16"(4,7 cm). Si adatta floorplates Winchester Model 70.
Altro...
Punteggi dei clienti per NECG MODEL 70 TRIGGERGUARD SCREW SET
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.8
Will not a fit a post-64 rifle(09.08.2010)
Althought the description does not say so, according to the Brownells techs these screws are for a pre-64 rifle. Two of the screws are too long for my Model 70 Classic.
Works well.(07.04.2011)
I prefer my screws to be long so that I can cut them to fit.
Great buy for model 70 owners(15.05.2013)
The screws worked great for me and they will fit post 64 rifles, the newer verson of the model 70. I did shorten the rear screw about .125" to match the one that came with the rifle as far as length. I may not have bottomed out anyway. But it is a easy fix to reduce the rear screw .125"
"PRACTICALLY PERFECT" IN EVERY WAY !!!!!(21.07.2017)
THESE ARE A GREAT FIT ON A WIN 70 / 670, MOSS 800 SERIES, OR THE MOSIN-NAGANT. THEY ALL USE THE .250" X 32 THREAD PATTERN. YES, THEY ARE LONGER IN LENGTH FOR SOME STOCK DIMENSIONS, BUT CAN EASILY BE CHUCKED INTO A DRILL, SPIN, & HOLD AGAINST THE GRINDING WHEEL ON A BENCH GRINDER & FIT TO THE LENGTH REQUIRED. ON SOME RIFLES, THE LENGTH MAY BE JUST PERFECT AS IS, BUT LONGER IS BETTER THAN TOO SHORT !!!!!!!-------OOORAH & SEMPER FIDELIS.
N. prodotto: 661000057 NECG MODEL 70 TRIGGERGUARD SCREW SET Parti Fabbricante: N70 Sostituire viti controcartella fabbrica usurate o danneggiate con questi in acciaio inox, viti esagonali che consentono di applicare la coppia massima senza scivolare e danneggiare la testa della vite o il brodo. Set comprende tre viti di lunghezza standard, più 5⁄32 "chiave a brugola. Possono richiedere minore alterazione a teste per adattarsi metallo personalizzata fondo a vite.
37.9CHF23CHF 37.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Stainless Steel Allen Head Screws For Maximum Torque
Replace worn or damaged factory triggerguard screws with these stainless steel, Allen head screws that allow you to apply maximum torque without slipping and damaging the screw head or the stock. Set includes three standard-length screws, plus 5⁄32" Allen wrench. May require minor alteration to screw heads to fit custom bottom metal.
Viti Allen Head in acciaio inox per la coppia massima
Sostituire viti controcartella fabbrica usurate o danneggiate con questi in acciaio inox, viti esagonali che consentono di applicare la coppia massima senza scivolare e danneggiare la testa della vite o il brodo. Set comprende tre viti di lunghezza standard, più 5⁄32 "chiave a brugola. Possono richiedere minore alterazione a teste per adattarsi metallo personalizzata fondo a vite.
SPEC.: acciaio inossidabile, finitura naturale. Include: (1) anteriore di protezione vite, 15/16"(3,3 cm) di lunghezza; (1) Centro protezione vite, 1-5/8"(4,1 cm) di lunghezza; (1) protezione posteriore vite, 1-13/16"(4,7 cm). Si adatta floorplates Winchester Model 70.
Altro...
Punteggi dei clienti per NECG MODEL 70 TRIGGERGUARD SCREW SET
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3.8
Will not a fit a post-64 rifle(09.08.2010)
Althought the description does not say so, according to the Brownells techs these screws are for a pre-64 rifle. Two of the screws are too long for my Model 70 Classic.
Works well.(07.04.2011)
I prefer my screws to be long so that I can cut them to fit.
Great buy for model 70 owners(15.05.2013)
The screws worked great for me and they will fit post 64 rifles, the newer verson of the model 70. I did shorten the rear screw about .125" to match the one that came with the rifle as far as length. I may not have bottomed out anyway. But it is a easy fix to reduce the rear screw .125"
"PRACTICALLY PERFECT" IN EVERY WAY !!!!!(21.07.2017)
THESE ARE A GREAT FIT ON A WIN 70 / 670, MOSS 800 SERIES, OR THE MOSIN-NAGANT. THEY ALL USE THE .250" X 32 THREAD PATTERN. YES, THEY ARE LONGER IN LENGTH FOR SOME STOCK DIMENSIONS, BUT CAN EASILY BE CHUCKED INTO A DRILL, SPIN, & HOLD AGAINST THE GRINDING WHEEL ON A BENCH GRINDER & FIT TO THE LENGTH REQUIRED. ON SOME RIFLES, THE LENGTH MAY BE JUST PERFECT AS IS, BUT LONGER IS BETTER THAN TOO SHORT !!!!!!!-------OOORAH & SEMPER FIDELIS.