Screwdriver Handle Gives You Added Control; Spring Steel Collet Is Gentle On The Softest Aluminum
Headache-saving tool includes an adjustable, spring steel collet that positively and delicately holds the globe of the sight for easy, damage-free installation. The spring steel is gentle on the sight beads, plus stands up to repeated use for a long service life. A Brownells screwdriver handle improves your control to tightly screw in the sights without damage to them or the barrel. Available in Small and Large to accommodate practically any sized sight bead.
SPECS: Plastic handle, spring steel collet. Small - 1" (2.54cm) diameter handle. Installs sight beads with diameters between .050" (1.3mm) to .125" (3.2mm). Large - 1-7/64" (2.82cm) diameter handle. Installs sight beads with diameters between .115" (2.9mm) to .188" (4.8mm).
Mehr...
Schraubendrehergriff gibt Ihnen zusätzliche Kontrolle; Federstahlhülse ist schonend für das weichste Aluminium
Das Kopfschmerz sparende Werkzeug enthält eine einstellbare Spannzange aus Federstahl, die den Globus des Visiers formschlüssig und feinfühlig hält und so eine einfache und beschädigungsfreie Installation ermöglicht. Der Federstahl schont die Sichtperlen und hält bei wiederholtem Gebrauch eine lange Lebensdauer aus. Ein Brownells-Schraubendrehergriff verbessert Ihre Kontrolle, um die Visiere fest einzuschrauben, ohne sie oder den Lauf zu beschädigen. Erhältlich in den Grössen Small und Large für praktisch jede Visierperle.
Technische Daten: Kunststoffgriff, Spannzange aus Federstahl. Kleiner Griff mit 2,54 cm Durchmesser. Zum Anbringen von Visierperlen mit Durchmessern zwischen 1,3 mm und 3,2 mm. Grosser Griff mit 1,82 cm Durchmesser. Installiert Visierperlen mit Durchmessern zwischen .115 "(2,9 mm) und .188" (4,8 mm).
Mehr...
Kundenbewertungen zu BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER SMALL
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 2.3
Good tool(15.01.2015)
The only way to go if you need to screw in a 1/16" middle shotgun bead. This tool is a "frustration reducer" that can be used to screw in anything that is very small.
Not what it should be(08.05.2015)
I bought this to change the beads on my Ruger Red Label. The mid bead is only 1/16". I purchased the "small" diameter, but, it will not tighten on a bead that small. The other problem was the handle. It was loose right out of the package. During use, it actually came off. Not my best purchase.
Deserves â0â stars(28.03.2018)
This thing is a joke and does not work, even with heat applied. It just clamps on the bead and spins. The bead in the brownells video is clearly already loosend before the video. I would give it 0 stars if I could.
Artikel-Nr.: 080000093 BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER SMALL Das Kopfschmerz sparende Werkzeug enthält eine einstellbare Spannzange aus Federstahl, die den Globus des Visiers formschlüssig und feinfühlig hält und so eine einfache und beschädigungsfreie Installation ermöglicht. Der Federstahl schont die Sichtperlen und hält bei wiederholtem Gebrauch eine lange Lebensdauer aus. Ein Brownells-Schraubendrehergriff verbessert Ihre Kontrolle, um die Visiere fest einzuschrauben, ohne sie oder den Lauf zu beschädigen. Erhältlich in den Grössen Small und Large für praktisch jede Visierperle.
32.9CHF0CHF 32.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 080000094 BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER LARGE Das Kopfschmerz sparende Werkzeug enthält eine einstellbare Spannzange aus Federstahl, die den Globus des Visiers formschlüssig und feinfühlig hält und so eine einfache und beschädigungsfreie Installation ermöglicht. Der Federstahl schont die Sichtperlen und hält bei wiederholtem Gebrauch eine lange Lebensdauer aus. Ein Brownells-Schraubendrehergriff verbessert Ihre Kontrolle, um die Visiere fest einzuschrauben, ohne sie oder den Lauf zu beschädigen. Erhältlich in den Grössen Small und Large für praktisch jede Visierperle.
Screwdriver Handle Gives You Added Control; Spring Steel Collet Is Gentle On The Softest Aluminum
Headache-saving tool includes an adjustable, spring steel collet that positively and delicately holds the globe of the sight for easy, damage-free installation. The spring steel is gentle on the sight beads, plus stands up to repeated use for a long service life. A Brownells screwdriver handle improves your control to tightly screw in the sights without damage to them or the barrel. Available in Small and Large to accommodate practically any sized sight bead.
SPECS: Plastic handle, spring steel collet. Small - 1" (2.54cm) diameter handle. Installs sight beads with diameters between .050" (1.3mm) to .125" (3.2mm). Large - 1-7/64" (2.82cm) diameter handle. Installs sight beads with diameters between .115" (2.9mm) to .188" (4.8mm).
Mehr...
Schraubendrehergriff gibt Ihnen zusätzliche Kontrolle; Federstahlhülse ist schonend für das weichste Aluminium
Das Kopfschmerz sparende Werkzeug enthält eine einstellbare Spannzange aus Federstahl, die den Globus des Visiers formschlüssig und feinfühlig hält und so eine einfache und beschädigungsfreie Installation ermöglicht. Der Federstahl schont die Sichtperlen und hält bei wiederholtem Gebrauch eine lange Lebensdauer aus. Ein Brownells-Schraubendrehergriff verbessert Ihre Kontrolle, um die Visiere fest einzuschrauben, ohne sie oder den Lauf zu beschädigen. Erhältlich in den Grössen Small und Large für praktisch jede Visierperle.
Technische Daten: Kunststoffgriff, Spannzange aus Federstahl. Kleiner Griff mit 2,54 cm Durchmesser. Zum Anbringen von Visierperlen mit Durchmessern zwischen 1,3 mm und 3,2 mm. Grosser Griff mit 1,82 cm Durchmesser. Installiert Visierperlen mit Durchmessern zwischen .115 "(2,9 mm) und .188" (4,8 mm).
Mehr...
Kundenbewertungen zu BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER SMALL
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 2.3
Good tool(15.01.2015)
The only way to go if you need to screw in a 1/16" middle shotgun bead. This tool is a "frustration reducer" that can be used to screw in anything that is very small.
Not what it should be(08.05.2015)
I bought this to change the beads on my Ruger Red Label. The mid bead is only 1/16". I purchased the "small" diameter, but, it will not tighten on a bead that small. The other problem was the handle. It was loose right out of the package. During use, it actually came off. Not my best purchase.
Deserves â0â stars(28.03.2018)
This thing is a joke and does not work, even with heat applied. It just clamps on the bead and spins. The bead in the brownells video is clearly already loosend before the video. I would give it 0 stars if I could.