Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Die perfekte Lösung für dein Trijicon RMR Rotpunktvisier!
Das IVER JOHNSON 1911 TRIJICON RMR SIGHT MOUNT von EGW bietet eine robuste und zuverlässige Montage für dein Rotpunktvisier. Hier sind die Details:
- Material: 7075 Aluminium
- Beschichtung: Matte Black Hardcoat
- Gesamtlänge: 1.780"
- Gesamtbreite: 1.1"
- Montagehardware: (2) 6-32 Flachkopfschrauben, (1) 6-32 x 3/16 Set-Schraube
- Rotpunktkompatibilität: Trijicon RMR, Holosun HS507C
Diese Montage passt:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Diese Montage passt nicht:
Um dein Trijicon RMR Rotpunktvisier zu montieren, entferne einfach die Kimme deiner Waffe und ersetze sie durch unsere Montage. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit wieder abnehmen und deine Kimme ersetzen. Montagehardware ist im Lieferumfang enthalten.
Installationsanleitung
- Die hintere Kimme entfernen*
- Die EGW Sight Mount im Dovetail installieren
- Set-Schraube anziehen (falls zutreffend)
- Das Rotpunktvisier auf die EGW Sight Mount setzen (ein kleines Stück Papier zwischen dem Rotpunktvisier und der Montage erleichtert die Entfernung und hält Loctite vom Rotpunktvisier fern.)
- Blaue Loctite auf die bereitgestellten Montageschrauben auftragen
- Montageschrauben auf 15in/lbs anziehen
2 Flachkopfschrauben - Bereitgestellt für Trijicon RMR
Die mit dieser Montage gelieferten Schrauben erfordern einen 5/64'' Inbusschlüssel für die Installation.