Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Overall Height: .335" Radius: .468" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C .468" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625". This should fit barrel/receiver diameters from .936"-1.350". .670" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625" which should fit the receiver ring on the following guns: Common Applications for .670" bottom radius mount: Shotgun: Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws) Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws) Browning A-Bolt 12 Gauge Savage 210 Savage 212 Savage 220 Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws) Winchester 1300 Winchester SXP Rifle: Remington 700, 722, 40x Remington 783 Remington 710/770 Remington xp 100 Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws) Savage arms centerfire models Winchester 70
Entdecke die vielseitige UNIVERSAL TRIJICON RMR SIGHT MOUNT!
Die UNIVERSAL .670" RADIUS SIGHT MOUNT für Trijicon RMR von EGW ist die perfekte Lösung für alle, die Präzision und Flexibilität bei ihren Zielvorrichtungen suchen.
Produktdetails:
- Material: 7075 Aluminium
- Beschichtung: Matte Black Hardcoat
- Gesamtlänge: 1.780"
- Gesamtbreite: 1.1"
- Gesamthöhe: .335"
- Radius: .468"
- Befestigungsmaterial: (2) 6-32 Flachkopf-Schrauben, (1) 6-32 Set-Schraube
Diese Montage ist kompatibel mit:
- Trijicon RMR
- Holosun HS507C
Die .670" Bottom Radius Montage sorgt dafür, dass es beim Anbringen einen kleinen Abstand zwischen dem Empfänger und der Montage gibt. Die beiden Abstände dieser Montage messen .500"-.505" und .8625". Sie sollte für Lauf-/Empfänger-Durchmesser von .936" bis 1.350" passen.
Häufige Anwendungen für die .670" Bottom Radius Montage:
- Shotgun:
- Benelli Auto / Super Black Eagle / Vinchi, M2 (Funktioniert nur im Frontset, 8-40 Schrauben)
- Benelli Supernova (Funktioniert nur im Frontset, 8-40 und längere Schrauben)
- Browning A-Bolt 12 Gauge
- Savage 210
- Savage 212
- Savage 220
- Stoeger M3000 / Stoeger M3500 (Funktioniert nur im Frontset, 8-40 Schrauben)
- Winchester 1300
- Rifle:
- Remington 700, 722, 40x
- Remington 783
- Remington 710/770
- Remington xp 100
- Remington 4, 6, 7400, 7615 (Nur Frontset, 8-40 Schrauben)
- Savage arms centerfire Modelle
- Winchester 70
Mit dieser Montage erhältst du die Möglichkeit, deine Schussgenauigkeit zu maximieren und das Beste aus deinem Equipment herauszuholen!