FHD FLASH HIDERS These fit the plan B type mounts. This is an updated version that has larger wrench flats on the rear. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH H900 Atlas and Atlas XL Compatible Plan B Compatible Atlas XL Adapter No Overrun Black Nitride Finish (67 HRC Surface Hardness) Shims Not Included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
Kompakte und leistungsstarke FHD FLASH HIDERS!
Die FHD FLASH HIDERS sind die perfekte Ergänzung für deine Plan B Montagen. Diese aktualisierte Version verfügt über grössere Schraubflächen an der Rückseite, was die Handhabung erleichtert. Achte darauf, immer einen Ausrichtungsstab zu verwenden, um sicherzustellen, dass das gesamte System korrekt eingerichtet ist.
Wichtige Hinweise:
- Reinige alle Oberflächen gründlich und stelle sicher, dass das Mündungsgerät ordnungsgemäss mit dem Lauf verbunden ist.
- Die Verwendung an einem Q-Kan kann deine Garantie ungültig machen, sei gewarnt.
- Das Mündungsgerät sollte mit etwa 30 ft lbs angezogen werden.
- Stelle sicher, dass das Mündungsgerät rechtwinklig zur Schulter ist.
- Wenn du den Schalldämpfer auf das Mündungsgerät setzt, achte darauf, dass die Gewinde und Konen sauber sind.
- Der Schalldämpfer sollte mit 10 ft lbs angezogen werden.
- Überprüfe die Ausrichtung.
Geniesse die Vorteile! Die Nitride-Beschichtung sorgt für eine bessere Abdichtung. Es ist jedoch äusserst wichtig, das Mündungsgerät richtig am Lauf anzuziehen und mit Rockset zu fixieren.
Eigenschaften:
- 17-4 PH H900
- Kompatibel mit Atlas und Atlas XL
- Plan B kompatibel
- Atlas XL Adapter ohne Überlauf
- Schwarze Nitride-Beschichtung (67 HRC Oberflächenhärte)
- Shims sind nicht enthalten; wenn du speziell zeitlich abstimmen möchtest, werden Shims benötigt.
Hinweis: Dein Lauf benötigt möglicherweise einen Shim, wenn der Hersteller keinen Gewindefreiraum vorgesehen hat.