Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

BROWNELLS
BOLT BODY SHIM SET

050806109599 080000507
Precision-formed carbon steel shims take up the gap and center the bolt body after truing the receiver with the .715" Bolt-Way Reamer. Saves time and effort by eliminating the need to fabricate shims from scratch. To install, undercut the bolt body to accept the shims and solder or adhere them in place with the included retaining compound. Front and rear two-piece shims are manufactured to precise tolerances and pre-contoured to ensure a perfect fit on any .700" diameter bolt body. After installation, machine shims to .7135"-.7145" O.D. to provide proper clearance for snug bolt fit and ensure reliable cycling.
SPECS: Carbon steel, polished finish. Front Shims Nominal .400 (10.2mm) wide x .012 (.305mm) thick. Rear Shims Nominal .700 (17.8mm) x .012 thick. Includes front and rear shims, retaining compound, and complete instructions.
48.9 48.9 1 CHF
Artikel-Nr.: 080000507
BROWNELLS BOLT BODY SHIM SET 050806109599 Präzisionsgeformte Unterlegscheiben aus Kohlenstoffstahl nehmen den Spalt auf und zentrieren den Schraubenkörper, nachdem der Aufnehmer mit der 715-Zoll-Reibahle bearbeitet wurde. Spart Zeit und Mühe, da keine Unterlegscheiben von Grund auf neu hergestellt werden müssen Die vorderen und hinteren zweiteiligen Beilagen werden mit präzisen Toleranzen hergestellt und vorgeformt, um einen perfekten Sitz auf jedem Bolzenkörper mit einem Durchmesser von 0,700 Zoll zu gewährleisten. Nach der Installation wird die Maschine auf .7135 "-. 7145" O.D abgeglichen. um das richtige Spiel für den festen Sitz der Schrauben zu gewährleisten und ein zuverlässiges Radfahren zu gewährleisten.
48.9 CHF 1 CHF 48.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Hersteller/Modell: Remington Modell: 700

Eigenschaften

Hersteller/Modell: Remington Modell: 700 Versandgewicht: 0.023kg Versandhöhe: 13mm Versandbreite: 84mm Versandlänge: 180mm

Artikeldetails

Made in USA



Precision-formed carbon steel shims take up the gap and center the bolt body after truing the receiver with the .715" Bolt-Way Reamer. Saves time and effort by eliminating the need to fabricate shims from scratch. To install, undercut the bolt body to accept the shims and solder or adhere them in place with the included retaining compound. Front and rear two-piece shims are manufactured to precise tolerances and pre-contoured to ensure a perfect fit on any .700" diameter bolt body. After installation, machine shims to .7135"-.7145" O.D. to provide proper clearance for snug bolt fit and ensure reliable cycling.
SPECS: Carbon steel, polished finish. Front Shims Nominal .400 (10.2mm) wide x .012 (.305mm) thick. Rear Shims Nominal .700 (17.8mm) x .012 thick. Includes front and rear shims, retaining compound, and complete instructions.
Newsletter