Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

BROWNELLS
AR-15/M16 BARREL EXTENSION TORQUE TOOLS

050806109582 080000637
Aids Fast, Easy Barrel Installation; Protects Barrel Nut & Receiver From Damage
Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the AR-15/M16.

SPECS: Machined steel, black oxide finish. 9” (22.9cm) long, 1” (2.5cm) diameter. Fits barrel extensions of AR-15/M16/M4 and clones chambered in .223/5.56mm only. Requires a ½” square drive torque wrench. Instructions included.

64.9 64.9 1 CHF
Artikel-Nr.: 080000637
BROWNELLS AR-15/M16 BARREL EXTENSION TORQUE TOOL
Herstellerproduktnummer: NONE 050806109582 Das praktische Werkzeug hilft beim Aufbringen eines geradlinigen Drehmoments, um die Laufmutter schnell und einfach zu montieren, ohne die Aussenseite der oberen Aufnahme zu zerkratzen. Hilft sicherzustellen, dass das richtige Drehmoment gleichmässig aufgebracht wird, während die richtige Ausrichtung von Lauf, oberem Auffangbehälter und Gasrohranschlüssen beibehalten wird. Zur Verwendung mit einem Zylindermutternschlüssel oder einem Rohrschlüssel mit Freilauf und einem Drehmomentschlüssel mit einem ½-Zoll-Vierkantschlüssel. Klemmen Sie einfach den Zylindermutternschlüsselgriff fest in einen Schraubstock, setzen Sie den Zylinder in die obere Aufnahme ein und ziehen Sie die Zylindermutter von Hand fest Schieben Sie den Lauf durch den Schraubenschlüssel, führen Sie das Drehmomentwerkzeug in die Rückseite des Empfängers ein, bis die Zähne in die Rastnasen in der Laufverlängerung einrasten, und ziehen Sie mit dem Drehmomentantrieb durch das Werkzeug die Laufmutter fest Hochleistungsstahl-Stangenmaterial für jahrelangen zuverlässigen Service. Erhältlich für den AR-15 / M16.
64.9 CHF 277 CHF 64.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Hersteller/Modell: AR-15

Eigenschaften

Hersteller/Modell: AR-15 Versandgewicht: 0.873kg Versandhöhe: 51mm Versandbreite: 64mm Versandlänge: 311mm

Artikeldetails

Made in USA



Aids Fast, Easy Barrel Installation; Protects Barrel Nut & Receiver From Damage
Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the AR-15/M16.

SPECS: Machined steel, black oxide finish. 9” (22.9cm) long, 1” (2.5cm) diameter. Fits barrel extensions of AR-15/M16/M4 and clones chambered in .223/5.56mm only. Requires a ½” square drive torque wrench. Instructions included.

Newsletter